Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Some aspects in estimating warranty and post‐warranty repair demands

When customers buy a product, they are often eligible for free repairs for a certain warranty period. In this article, we study some important aspects, which are often overlooked in the literature but are of interest to the manufacturer, in estimating both warranty and post‐warranty repair demands. We consider that the installed base of the product (i.e., the number of units of the product actually in use) varies with time due to both new sales and units being taken out of service. When estimating warranty and post‐warranty repair demands, we explicitly address the fact that customers may not always request repairs for failed units. For the case where the product failure time distribution is exponential, we derive the closed‐form expressions for both types of repair demands of a single unit and of the time‐varying installed base. The insights into some risk‐related quantities are also presented. Furthermore, the proposed model is extended by considering delayed warranty claims that are frequently seen in practice. Numerical examples illustrate that understanding both types of repair demands and the related decision variables is important for managing the obligatory and profitable repair services. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 499–511, 2013     

LDO稳压器敏感度建模与仿真技术研究

基于LDO稳压器在电磁干扰（EMI）下产生直流偏移失效的机理分析,展开敏感度建模与仿真方法研究。使用一款实验芯片,创新地引入片上电压传感器,用于测试EMI在LDO稳压器内部的传播特性。在敏感度建模中,建立等效电路模型,通过直流功能测试,Z参数阻抗特性测试验证模型的正确性,将该模型用于LDO稳压器的敏感度预测。在敏感度仿真过程中,通过分析关键子电路和不断增加寄生元件,仿真不同寄生因素对敏感度影响的权重。将仿真结果与传导直接注入法（DPI）片上测试结果对比,仿真结果与DPI测试在频域1MHz至1GHz匹配。     

相控阵雷达外场试验目标模拟技术

针对传统雷达回波模拟技术模拟目标态势单一、建设成本高、灵活性差等缺陷,结合相控阵雷达快速波束定向的扫描特点,提出了一种基于射频存储转发技术和移动阵列平台的相控阵雷达外场试验目标模拟方法。该方法采用射频空间辐射注入的方式为雷达提供较为逼真的三维空间模拟目标回波信号和构建较为复杂的模拟目标场景态势,能够支持包括雷达天线在内的整个雷达系统进行模拟试验或训练。最后通过实例仿真验证了该方法的有效性和可实现性。     

一种基于条件概率的设备占用率修正算法

简要介绍了某型无人机维修级别分析中的组合方案法 ,针对传统分析法中设备占用率采用经验值 ,造成可信度低的问题 ,提出了一种基于不同故障模式发生时的条件概率求解设备占用率的算法 ,并给出了这种算法的适用范围。     

考虑腐蚀因素的船体结构寿命预测方法

为建立考虑腐蚀因素的船体结构寿命预测方法,在分析现有常用的船体结构腐蚀损伤时变模型的基础上,根据舰船维修保障实际情况建立了考虑腐蚀防护系统作用时间和维修时间等因素的腐蚀时变模型.根据相关规范选择了船体结构腐蚀寿命标准,并建立了一种计算船体结构腐蚀寿命的方法.该方法建立了船体结构腐蚀寿命与腐蚀防护系统作用时间和修理时间等...     

海湾战争与舰船维修

在论述舰船战时雏修保障重要作用的基础上,总结了美海军在海湾战争中实施战前检修及战时抢修的基本活动和经验,提出了我军舰船战时维修保障建设的基本思路及措施。     

带横向射流的绕后台阶超音速外流场的数值模拟

将一股射流喷入超音速外流是飞行器飞行控制的常用方法。本文通过应用MacCormack 显格式和Ba(?)dwin-Lomax 代数湍流模型求解二维可压缩的RANS 方程,对带横向射流的绕后台阶的超音速外流场进行了数值模拟,并给出了流场的速度向量图、等压线图和等马赫线图。与无喷射的情形相比,台阶底部压力增加了一倍左右。     

战时装甲装备修理任务划分标准的探讨

介绍了战时装甲装备的各级修理机构,给出了战时装甲装备修理任务的划分标准,描述了修理对象的分布规律——艾拉姆咖(Эрланга)分布的分布函数和概率密度函数。在此基础上,计算得到了战损某型坦克进入各级修理机构的概率,通过对比分析,发现我军修理任务的划分存在不合理性,俄军修理任务的划分比较科学,建议采用俄军修理任务的划分标准。     

21世纪设备维修工程的新进展一再制造工程

随着21世纪的来临,制造与维修工程越来越趋于统一。未来的制造与维修工程将考虑设备和零部件设计、制造和运行的全过程,是一个以优质、高效、节能、节材为目标的系统工程。再制造工程是国外新兴的产业领域,是先进制造技术的重要组成都分,也是先进制造技术的重要补充和发展。再制造技术充分利用各种先进表面工程和其它成型技术,制成再制造毛坯,形成再制造产品,是具有重大实用价值和优质、高效、少污染的绿色制造技术。