Brill流型的脉冲防暴水炮发射管内气液两相流流型

搭建了脉冲防暴水炮气液两相流动力研究的模化实验平台,对水炮发射管进行可视化研究的改装,通过高速摄影机来拍摄发射管内气液两相流气液界面运动的行为。简化了水炮的三维物理模型,应用OpenFOAM软件自带的大涡数值模拟模型(LES)对发射管内气液两相流进行流场仿真,得到了流型的演变过程。数值模拟结果显示脉冲防暴水炮发射管内气液两相动力过程的流型演变规律为:开始阶段为冲击流,但持续时间极为短暂;然后演变为环状流,持续时间较长;最后为气液掺混阶段的雾状流。数值模拟结果与实验结果吻合良好。     

联合编队作战行动方案建模

研究联合编队的作战行动方案问题,首先需要建立合理的任务模型。在基本作战样式基础上,针对联合编队任务特点,设计了一种联合编队作战行动方案的建模方法。该模型包含对海攻击和对空防御等5种基本作战样式,结合规划和调度两方面的特点,提供了资源和系统状态的描述机制。实例证明建模方案不仅具有可行性,而且丰富了作战行动方案的建模理论,对联合编队作战系统的研究、决策和建设具有一定的参考价值。     

SINS/DR组合导航系统可观测性研究

对SINS/DR组合导航系统的误差方程进行了介绍。将陀螺漂移、加速度计零偏和里程仪刻度系数误差扩展为卡尔曼滤波器的状态,建立了19维状态的组合导航滤波模型。采用分段线性定常系统(PWCS)分析了载车在各个不同运动特性下SINS/DR组合导航系统的可观测矩阵;利用奇异值分解(SVD)分析法定量地分析了SINS/DR导航系统的可观测度。通过系统仿真预测了位置误差、姿态误差和速度误差的滤波效果,仿真结果表明,位置误差、姿态误差和速度误差的估计效果较好。     

Random disambiguation paths for traversing a mapped hazard field

We consider the problem of safely and swiftly navigating through a spatial arrangement of potential hazard detections in which each detection has associated with it a probability that the detection is indeed a true hazard. When in close proximity to a detection, we assume the ability—for a cost—to determine whether or not the hazard is real. Our approach to this problem involves a new object, the random disambiguation path (RDP), which is a curve‐valued random variable parametrized by a binary tree with particular properties. We prove an admissibility result showing that there is positive probability that the use of an RDP reduces the expected traversal length compared to the conventional shortest zero‐risk path, and we introduce a practically computable additive‐constant approximation to the optimal RDP. The theoretical considerations are complemented by simulation and example. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

利用迭代线性约束最小二乘方法实现不规则阵列的方向图综合

研究了用自适应波束形成技术实现不规则阵列的方向图综合问题,改进了应用于方向图综合的迭代线性约束最小二乘方法,改进后的算法提高了数值稳定性和对随机稀疏阵的适应性。对特定的阵列如果指定的理想方向图无法达到,该算法可以获得最好的逼近。仿真结果验证了算法的性能。     

挠性航天器变幅值输入成形姿态机动策略

针对变参数挠性航天器的姿态机动问题,在变幅值零振动成形器的基础上,提出了鲁棒性较强的变幅值零振动和零微分成形器设计方法,设计了鲁棒姿态机动策略.该机动策略的控制目标是,将航天器机动到期望状态的同时,消除挠性结构的残余振动.以含转动挠性太阳翼的航天器进行三轴姿态机动为例,进行数值仿真.仿真结果表明,该机动策略对挠性结构频...     

Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization

Multi-pass TIG welding was conducted on plates (15×300×180 mm3) of aluminum alloy Al-5083 that usually serves as the component material in structural applications such as cryogenics and chemical processing industries. Porosity formation and solidification cracking are the most common defects when TIG welding Al-5083 alloy, which is sensitive to the welding heat input. In the experiment, the heat input was varied from 0.89 kJ/mm to 5 kJ/mm designed by the combination of welding torch travel speed and welding current. Tensile, micro-Vicker hardness and Charpy impact tests were executed to witness the impetus response of heat input on the mechanical properties of the joints. Radiographic inspection was performed to assess the joint's quality and welding defects. The results show that all the specimens displayed inferior mechanical properties as compared to the base alloy. It was established that porosity was progressively abridged by the increase of heat input. The results also clinched that the use of me-dium heat input (1-2 kJ/mm) offered the best mechanical properties by eradicating welding defects, in which only about 18.26% of strength was lost. The yield strength of all the welded specimens remained unaffected indicated no influence of heat input. Partially melted zone (PMZ) width also affected by heat input, which became widened with the increase of heat input. The grain size of PMZ was found to be coarser than the respective grain size in the fusion zone. Charpy impact testing revealed that the absorbed energy by low heat input specimen (welded at high speed) was greater than that of high heat input (welded at low speed) because of low porosity and the formation of equiaxed grains which induce better impact toughness. Cryogenic (-196 C) impact testing was also performed and the results corroborate that impact properties under the cryogenic environment revealed no appreciable change after welding at designated heat input. Finally, Macro and micro fractured surfaces of tensile and impact specimens were analyzed using Stereo and Scanning Electron Microscopy (SEM), which have supported the experimental findings.     

Adaptive phasefield modelling of crack propagation in orthotropic functionally graded materials

In this work, we extend the recently proposed adaptive phase field method to model fracture in orthotropic functionally graded materials (FGMs). A recovery type error indicator combined with quadtree decomposition is employed for adaptive mesh refinement. The proposed approach is capable of capturing the fracture process with a localized mesh refinement that provides notable gains in computational efficiency. The implementation is validated against experimental data and other nu-merical experiments on orthotropic materials with different material orientations. The results reveal an increase in the stiffness and the maximum force with increasing material orientation angle. The study is then extended to the analysis of orthotropic FGMs. It is observed that, if the gradation in fracture properties is neglected, the material gradient plays a secondary role, with the fracture behaviour being dominated by the orthotropy of the material. However, when the toughness increases along the crack propagation path, a substantial gain in fracture resistance is observed.     

Cooperative interception with fast multiple model adaptive estimation

For the case that two pursuers intercept an evasive target, the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target, which performs a bang For the case that two pursuers intercept an evasive target, the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target, which performs a bang-bang evasive maneuver with a random switching time. Combined Fast multiple model adaptive estimation (Fast MMAE) algorithm, the cooperative guidance law takes detection configuration affecting the accuracy of interception into consideration. Introduced the detection error model related to the line-of-sight (LOS) separation angle of two interceptors, an optimal cooperative guidance law solving the optimization problem is designed to modulate the LOS separation angle to reduce the estimation error and improve the interception performance. Due to the uncertainty of the target bang-bang maneuver switching time and the effective fitting of its multi-modal motion, Fast MMAE is introduced to identify its maneuver switching time and estimate the acceleration of the target to track and intercept the target accurately. The designed cooperative optimal guidance law with Fast MMAE has better estimation ability and interception performance than the traditional guidance law and estimation method via Monte Carlo simulation.     

基于车载GPS定位的固定目标坐标测量误差分析

通过分析地面移动侦察系统对固定目标进行一次坐标测量时的测量过程,建立了固定目标坐标测量模型。通过对测量过程中误差传递规律的分析,导出了目标坐标测量误差的分布规律。根据坐标测量误差中各组成成分的大小,将测量误差分布规律近似成正态分布,并给出了分布参数的简化计算方法。仿真结果证实了误差分布规律近似及参数计算简化的可行性。