Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Adaptive phasefield modelling of crack propagation in orthotropic functionally graded materials

In this work, we extend the recently proposed adaptive phase field method to model fracture in orthotropic functionally graded materials (FGMs). A recovery type error indicator combined with quadtree decomposition is employed for adaptive mesh refinement. The proposed approach is capable of capturing the fracture process with a localized mesh refinement that provides notable gains in computational efficiency. The implementation is validated against experimental data and other nu-merical experiments on orthotropic materials with different material orientations. The results reveal an increase in the stiffness and the maximum force with increasing material orientation angle. The study is then extended to the analysis of orthotropic FGMs. It is observed that, if the gradation in fracture properties is neglected, the material gradient plays a secondary role, with the fracture behaviour being dominated by the orthotropy of the material. However, when the toughness increases along the crack propagation path, a substantial gain in fracture resistance is observed.     

火灾场钢筋混凝土简支梁抗弯性能分析

通过对火灾中钢筋混凝土简支梁截面温度场和材料热力学性能分析,将混凝土分为弹性区和塑性区来分别计算其强度,建立了火灾场简支梁截面内混凝土应力和梁极限抗弯承载力的计算公式,通过具体算例分析了钢筋混凝土简支梁截面温度场和极限承载力的变化规律和原因。     

DN150装配式管线涡街流量检测装置研制

涡街流量检测技术是振动式流量仪表中应用最广泛的一种,具有测量范围宽、精度较高、重复性好、可靠性高、不受介质物性和组分变化影响、不需精细过滤、流阻小等一系列优点,特别适合在装配式输油管线上应用.介绍了DN150装配式管线涡街流量检测装置,重点介绍研制中解决的几个关键技术问题.     

防空导弹武器系统网络化作战统一指令场技术研究

分析了未来防空导弹武器系统网络化作战对统一指令场的要求,提出将直接扩频码分多址技术用于统一指令场,并在典型的进攻模式和战场环境下针对要地保护区域给出了一种合理的武器系统配置以及统一指令场设计。     

一种简单的直接数字式空间矢量PWM实现方法

针对常规SVPWM实现困难的缺点,根据零序信号注入方法以及“伏 秒”平衡原理,提出了一种新的SVPWM实现方法,利用这种方法可以直接获得逆变器开关触发时刻,因此可以减小运算器执行周期,提高计算速度.用该方法实现了永磁同步电动机的磁场定向矢量控制,并进行了仿真和实验研究,证明了新方法的正确性和优越性.     

模糊超球支持向量机

提出了模糊超球支持向量机算法。首先根据样本分布特性将样本空间划分成有限个超球子空间,超球半径经归一化处理后作为各球心样本点的模糊属性值,超球球心组成新的训练样本集,在构造决策超平面的过程中对应不同模糊属性值的各输入样本增加了不同训练权重。仿真实验结果表明:该算法减少了训练样本数,有利于提高支持向量机的训练速度和测试速度,有效地防止了训练样本中噪声点对训练结果的负面影响。     

三维高超音速干扰流场数值模拟与实验验证

采用Osher Chakraverthy的TVD格式、Baldwin Lomax湍流模型和LU SSOR隐式方法求解了完全NS方程 ,数值模拟了三维高超音速绕流与横向喷流干扰流场。并在高超音速炮风洞中开展了喷流实验研究 ,对该喷流流场的数值计算结果进行实验验证     

有限扩域上的Fuzzy子域

在文[3]中,引入了更一般的Fuzzy理想等概念,使Fuzzy代数结构的研究进一步深入进行。本文作为Fuzzy结构理论中的又一课题,引入了Fuzzy子域等概念,对有限扩域上的Fuzzy子域的构造问题进行了比较详细的讨论,得到了几个类似于[2]中的表示定理。尔后,引入了诱导Fuzzy子域,对单纯代数扩域上的诱导Fuzzy子域进行了研究。     

YFT77 向量语句的实现

本文提出了通过源语言到中间语言的变换进行语言扩充的方法。这种方法已用来在YFT77中扩充向量语句,实践证明,这是一种有效、可行的途径。