纳米铜润滑油添加剂的制备及其性能研究

采用KBH4液相还原法制备了具有面心立方结构,粒径约为40nm的纳米铜颗粒。利用环块摩擦磨损试验机考察了其作为添加剂在不同润滑油中的摩擦学性能,利用SEM、EDS等对摩擦表面进行了形貌、成分分析,探讨了纳米铜颗粒作为添加剂的作用机理。     

聚氨酯阻尼材料的结构设计及其动态力学性能的研究

据聚合物阻尼性能定量化理论,设计合成了软段结构、分子量不同以及含支链的聚氨酯.动态力学性能测试表明,含聚环氧丙烷二醇(PPG,Mn=2 000)、聚己二酸二乙二醇(PDEA,Mn=2 000)、聚己二酸乙二醇(PEAG,Mn=2 000)软段的试样的温域宽和内耗峰高.当软段分子量增加时,材料的损耗因子增加.组份相同时,含支链比不含支链的聚氨酯试样的内耗峰高,阻尼值大.     

磁性微粉/聚乙烯复合材料的电磁特性

研究了磁性微粉的物相组成及其与聚乙烯相复合制成的吸波材料在８． ２～１２． ４ＧＨｚ 频段内的电磁特性。结果表明： 复合材料中聚乙烯的加入量对电磁特性在上述频段内各频率范围影响程度不同； 磁性微粉中聚碳硅烷量为２０％ 时， 反射衰减大于６ｄＢ对应的频带宽度为２ＧＨｚ。     

阈下听觉技术研究及其应用

从网络空间侦察能力、指挥控制能力、精确攻击能力、防御能力和评估能力等五个方面,对网络空间支援力量的核心支援能力进行了系统论述,提出建设军队网络支援力量、应对网络空间安全威胁的新思考和新观点。研究认为,当前我军在网络空间的安全意识、核心技术、均衡发展等方面面临严峻困难。为实现网络强国的奋斗目标,需要加强国家网络安全的顶层设计,增强网络技术自主创新能力,强化军民融合式建设和系统常态的攻防训练等。     

装备外壳结构周期设计及其振动特性

将声子晶体能带理论应用于装备外壳结构设计,把装备外壳圆柱壳段设计成周期结构。基于多子结构的双协调自由界面模态综合法,计算并对比了周期圆柱壳与非周期圆柱壳对弯曲振动的衰减特性。结果表明,周期圆柱壳中有弯曲振动强衰减带隙存在,而非周期结构中则没有带隙存在。进一步研究了轴向周期复合夹层材料圆柱壳的弯曲振动特性。同样,该周期复合夹层结构中依然有弯曲振动带隙存在,且在带隙频率范围内弯曲振动传播将受到明显的抑制。最后,考虑实际装备外壳形状,研究了含周期结构圆柱段的复杂装备外壳振动特性。研究表明,经过局部周期设计的复杂装备外壳保持了带隙特性,这说明了将能带理论应用于工程实际装备外壳的振动控制具有可行性。     

国防知识产权运营市场化研究

提高国防知识产权转化应用水平,关键是解决制约国防知识产权转化应用的体制机制问题。可借鉴普通知识产权运营经验,以市场化方式促进国防知识产权运营工作。针对当前运营中出现的市场失灵现象,从创新政府治理模式、引入市场机制、增强法律法规建设、搭建公共服务平台等途径入手,逐步理顺政府与市场的关系,进行国防知识产权运营市场化改革。     

Preservation of unimodality under shock models

A number of results pertaining to preservation of aging properties (IFR, IFRA etc.) under various shock models are available in the literature. Our aim in this paper is to examine in the same spirit, the preservation of unimodality under various shock models. For example, it is proved that in a non-homogeneous Poisson shock model if {p_k}_K≥0, the sequence of probabilities with which the device fails on the kth shock, is unimodal then under some suitable conditions on the mean value function Λ (t), the corresponding survival function is also unimodal. The other shock models under which the preservation of unimodality is considered in this paper are pure birth shock model and a more general shock model in which shocks occur according to a general counting process. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 952–957, 1999     

Modeling and realization of real time electronic countermeasure simulation system based on SystemVue

In this paper, we proposed a new design scheme of real time electronic countermeasure simulation system. This paper mainly expounds the modeling and realization methods of each part of the whole simulation system, and the real-time property of system has been lucubrated. Electronic countermeasure simulation system is the key part of military training of individuals; it can also allow the realistic evaluation of the performance of modern equipments and techniques. As a proof, we have drawn up a series of simulation scenarios, such as radar electronic reconnaissance simulation scenario, to explain the feasibility and the superiority of our modeling scheme in this paper.     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

激光制备高附着性能的铜基类金刚石膜

提升类金刚石(Diamond-Like Carbon, DLC)膜在被保护基底上的附着能力具有明显的实际应用价值。从微观机理上分析了前期设计的Cu基多层DLC膜有效性的原因。在此基础上,研究了DLC/SiC循环层中两者厚度比例对膜层的附着性能、纳米硬度和耐磨性的影响,以优化结构、进一步提升实际应用所需的膜层性能。纳米划痕和压痕测试结果表明:随着DLC层与SiC层厚度比例的增大,多层DLC膜在Cu基上附着性能逐渐降低,但当厚度比小于2.3时,仍接近厚度400 nm的单层DLC膜在Si基上的附着性能;Cu基多层DLC膜的纳米硬度逐渐提高,同时,耐磨性接近纯DLC膜。