自整角机轴角智能采集电路的研制

设计研制了一种新的自整角机轴角智能采集接口电路．该电路应用于舰船自动航行系统,实现罗经、计程仪的航向、航速模数转换．它具有精度高、可靠性好、使用方便等一系列优点．     

野战有线远传接口测试信号源的设计与实现

针对野战有线远传通信接口的测试需求,设计了一种基于xDSL技术的接口测试信号源。以可编程数字器件(FPGA)为核心,配合通用模拟前端,构建可编程和可重配置的硬件接口电路。利用硬件描述语言,完成成帧解帧、加扰解扰、编码解码、滤波等功能,实现HDSL接口电路功能。实验结果表明,设计的HDSL接口功能实现正常,允许用户通过修改程序代码和系统输入来实现对接口的动态配置和维护更新,有效地解决了以集成芯片为基础的传统HDSL接口灵活性差和维护成本高的问题,并为其他信号接口系统的设计实现提供了有益的参考。     

PC机并行口的扩展

本文介绍一种经济实用的并行口扩展板电路。实践证明,该电路工作性能稳定,操作方便可靠,适用于PC/XT,PC/AT机的I/O扩展。     

提高聚氨酯推进剂基体粘结强度的途径探索

聚氨酯的水解稳定性较差,粘结强度偏低。将端羟基聚丁二烯与聚氨酯进行共混改性,提高了聚氨酯基体的表观交联度及推进剂的拉伸强度。采用示差扫描量热法和红外光谱法分析基体共混物的微观结构,表明这是提高聚氨酯基体粘结强度的一条有效途径。     

Enhancing the explosive characteristics of a Semtex explosive by involving admixtures of BCHMX and HMX

A well-known ternary plastic explosive, Czech Semtex 1H, contains a mixture of PETN and RDX softened by SBR. In this work, BCHMX was used to replace PETN in Semtex 1H to form Sem-BC+RDX. In addition, another mixture based on BCHMX and HMX as energetic fillers bonded by the polymeric matrix of Semtex 1H (Sem-BC+HMX) was studied. The particle size distribution of each individual explosive was determined to obtain the optimum mixing conditions. Friction and impact sensitivities were determined. The velocity of detonation was reported practically and the detonation properties were calculated by EXPLO5 code. The explosive strength of each sample was measured by the ballistic mortar test. The conclusion confirms that the velocity of detonation of Sem-BC+HMX was the highest in comparison with the prepared samples. Sem-BC+RDX has the least impact and frictions sensitivities. Sem-BC+RDX has higher detonation velocity, detonation properties and explosive strength than Semtex 1H. Addition of BCHMX in Semtex 1H as a replacement for PETN is the candidate to produce a high performance advanced Czech plastic explosive.     

基于PCI总线的多路数据总线接口设计与实现

提出了一种主处理机可以直接控制的1553B总线接口模块的设计与实现方案,并简要介绍了其硬件结构、工作过程和软件开发.利用PCI协议芯片实现PCI局部总线与军用1553B总线的桥接,采用WDM技术编写驱动程序.所设计的总线接口模块符合MIL-STD-1553B总线标准,具有结构简单、成本低廉、操作方便等特点,可用于仿真,开发1553B总线产品.     

核心力量训练在手榴弹立姿投掷中的应用

核心力量训练作为现代体能训练的重要内容,近年来引起了国内许多体育界研究者的高度重视,已取得了一定的研究成果。但是,在部队的手榴弹立姿投掷训练课目中尚未引入这一训练理念。本文通过阐述与核心力量训练相关的概念、手榴弹立姿投掷核心力量训练的作用,总结出适用于部队实际、开展手榴弹立姿投掷核心力量训练的方法和原则。     

Development of proxy relationships: a case study of the Lebanese Civil War

Proxy warfare is a consistent element in international warfare. However, it is unclear why proxy relationships form in cases where states have multiple options of groups to support. Existing research identifies the presence of transnational constituencies, shared interstate rivalries, and moderate relative strength of militant groups as highly influential on the development of a proxy relationship. This study examines the presence of these variables within the context of the Lebanese Civil War. The results of this demonstrate that each state places greater importance on some variables and ignores others when choosing a proxy. Additionally, this study further demonstrates the presence of new variables that are key to the development of proxy relationships.     

组合回转壳体动力分析的混合界面法

组合回转壳体在工程结构系统中大量存在,对它们进行动力分析是十分必要的。介绍了混合界面法的主要原理和在组合回转壳体结构系统动力分析中的应用,并用两个例题作了分析和计算,证明是成功的。该方法可推广到其它复杂系统结构的动力分析。     

复合导线高电导特性的机理分析

分析了复合导线在一定的频域,其导电性能优于铜导线的高电导特性的物理实质.认为,这种特性是由于电磁波在导线内部界面上的反射引起的.