Damage behavior of the KKV direct hit against fluid-filled submunition payload

The damage effects of fluid-filled submunition payload impacted by the kinetic kill vehicle (KKV) are investigated by simulations and ground-based experiments. Numerical simulations showed that the damage level and number of submunitions were significantly influenced by the diameter of the KKV compared with its length. Based on that, a high velocity penetrator formed by shaped charge explosion was used to simulate the direct hit experiment of a KKV impacting submunition payload. Experimental results demonstrated that the damage modes of submunitions mainly included the slight damage, perforation and total smash, showing a good agreement with the simulations. To understand the multiple damage modes of submunitions, the damage behavior of the submunitions in direct hit process were analyzed based on the AUTODYN-3D code. Numerical results presented that increased KKV diameter can increase the crater diameter and expand the damage volume, which will achieve a higher direct hit lethality. Further analysis indicated that there were other mechanical behaviors can enhance the damage to submunitions not lying in the KKV flight path, such as secondary debris kill, neighboring submunitions collision with each other, and high-speed fluid injection effect.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

弹道导弹被动段最优脉冲变轨方法

弹道导弹大气层外飞行时间长且弹道固定,易被敌方预测和拦截。针对以上问题,本文提出一种最优脉冲式变轨方法,该方法设计的弹道由2条不同的椭圆弧段组成,成功命中目标的同时,增加了敌方的拦截难度。以机动变轨所需能量和变轨后飞行剩余时间的加权最优为性能指标,设计了利用遗传算法在初始弹道上寻求最优变轨点的方法。最后,将遗传算法搜索最优点结果与遍历搜索结果进行对比,其最大误差为 ,从而验证了遗传算法在应用于导弹变轨问题,用以寻求最优变轨点是准确有效的。     

钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。     

基于飞行时间的弹道导弹火力控制

为了达到最佳射击效果,弹道导弹突击目标时经常需要多枚导弹同时击中目标,因此根据飞行时间确定发射时间则成为弹道导弹火力控制问题的重要内容。以具体导弹为例,采用仿真的方法分析了影响飞行时间的内在原因,得出了明确的结论,使导弹部队能够根据飞行时间确定发射时间,从而合理地进行火力控制,提高毁伤效果和震慑力。     

嵌入式实时操作系统性能测试方法

为综合评价操作系统能否满足使用要求,研究了一种定量测试嵌入式实时操作系统功能和性能的方法,提出了具体的测试项目、测试环境和测试用例的要点,给出一种基于外部注入的功能测试、性能测试、应用测试方法及具体实现。测试结果证明,该方法对提高软件质量,缩短研制周期,增强可维护性等方面有显著效果。     

动态弹道补偿

通常意义下的弹道补偿没有考虑火炮摆动对射击的影响,因而在坦克运动或目标运动时,命中概率将大大降低.分析了由火炮摆动带来的射击误差,给出了相应的补偿算法及电路的实现方法.     

潜射弹道导弹出水姿态分析

分析了潜艇深度、纵倾角、横倾角、海面风速、海面波长、平均波高等因素对潜射导弹的偏航角、俯仰角、滚动角、偏航角速度、俯仰角速度、滚动角速度的影响。由于实验数据比较分散,不适合神经网络的训练,所以首先对实验数据模糊化,并用以对神经网络的训练。用训练好的神经网络分析了潜艇单因素变化的导弹出水姿态。     

考虑几何及力和力矩非线性时弹丸运动方程的研究

从矢量形式的六自由度弹丸运动方程组出发,推导出了在全部力和全部力矩作用下考虑几何非线性及力和力矩非线性时的弹丸运动方程组,并导出了其用于数值计算的柯西标准形式,得到了攻角和进动角的计算表达式.此动力学模型可用于弹丸大攻角飞行时的弹道计算及某些灵巧弹药(如末敏弹)的设计.     

机载武器控制系统算法研究

机载武器控制系统的算法是其软件部分的核心,算法的最终目的是保证在一定的条件下实现最有利的武器运用方案。将机载武器控制系统的算法分为四个不同的子算法,对每一子算法的建立方法进行了描述,最后得到形成执行命令的算法,即武器运用方案执行命令分配及形成的算法。