利用过阻尼电路合成高压方波脉冲

在过阻尼RLC电路分时放电的基础上,提出新型高压方波脉冲产生方法。理论分析表明:过阻尼RLC电路产生的双指数电压波与脉冲形成线产生的方形电压波具有类似的上升沿和平顶。电路模拟表明:通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明:样机可以在电阻负载上输出幅值为17 kV、平顶宽度为330 ns～5.8μs、上升沿为100～350 ns的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

PMI泡沫夹层结构雷达天线罩间接热-结构耦合分析与实验研究

机载PMI泡沫夹层结构雷达天线罩在环境温度变化时将产生表面变形现象并影响其使用性能,但对天线罩热变形结果进行实时检测分析具有一定难度。通过ANSYS间接热-结构耦合法建立了分析模型,对天线罩进行了计算分析,采用热膨胀片状模型进行了理论分析,在此基础上,设计并开展了温度冲击实验研究。结果表明, PMI夹层结构天线罩的热-结构耦合变形综合应变趋势是棱边处膨胀程度最大,由边缘至天线罩透波面中心处,膨胀程度逐渐减小;间接热-结构耦合计算应变值与实测应变值之间平均相差35.08%,间接热-结构耦合分析方法与模型具有一定的可信性。     

Pairwise model discrimination with applications in lifetime distributions and degradation processes

Reliability data obtained from life tests and degradation tests have been extensively used for purposes such as estimating product reliability and predicting warranty costs. When there is more than one candidate model, an important task is to discriminate between the models. In the literature, the model discrimination was often treated as a hypothesis test and a pairwise model discrimination procedure was carried out. Because the null distribution of the test statistic is unavailable in most cases, the large sample approximation and the bootstrap were frequently used to find the acceptance region of the test. Although these two methods are asymptotically accurate, their performance in terms of size and power is not satisfactory in small sample size. To enhance the small‐sample performance, we propose a new method to approximate the null distribution, which builds on the idea of generalized pivots. Conventionally, the generalized pivots were often used for interval estimation of a certain parameter or function of parameters in presence of nuisance parameters. In this study, we further extend the idea of generalized pivots to find the acceptance region of the model discrimination test. Through extensive simulations, we show that the proposed method performs better than the existing methods in discriminating between two lifetime distributions or two degradation models over a wide range of sample sizes. Two real examples are used to illustrate the proposed methods.     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.     

反电动势对无扰载荷航天器精确定向的影响

无扰载荷航天器中非接触式作动器反电动势会引起有效载荷模块与支持模块之间的耦合,影响有效载荷模块的精确定向性能。通过建立无扰载荷航天器的耦合动力学模型,分析非接触式作动器反电动势对有效载荷模块精确定向性能的影响。考虑六支杆立方构型无扰载荷接口,结合拉格朗日方程和牛顿欧拉方法建立有效载荷模块平台动力学模型。推导非接触式作动器的输出力模型,并引入有效载荷模块平台动力学模型,给出考虑非接触式作动器反电动势的耦合动力学模型。将支持模块上飞轮动静不平衡引起的谐振作为干扰力矩,建立了无扰载荷航天器在轨定向状态的Simulink仿真模型。仿真结果表明,反电动势系数越大,干扰力矩对有效载荷模块的影响越大,有效载荷模块精确定向精度越低。     

利用RLC电路合成高压方波脉冲

基于过阻尼RLC电路分时放电,提出了一种新型高压方波脉冲产生方法。理论分析表明过阻尼RLC电路产生的双指数电压波与PFL产生的方形电压波具有类似的上升沿和平顶。电路模拟表明通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台400 nF脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明样机可以在250 Ω电阻负载上输出幅值17 kV,平顶宽度330 ns~5.8 μs,上升沿100~ 350 ns 的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

重塑军队作战力量体系的几点思考

作战力量体系是一个国家军事力量体系的核心组成部分。近些年通过深化国防和军队改革,我军军事力量体系宏观上发生了脱胎换骨的变化,接下来到了对作战力量体系进行重塑的攻坚阶段,本文结合当前作战力量体系发展的一些特点和建设存在的短板,提出了重塑我军作战力量体系的决策建议。      

某型导发架通用测试系统软件复用性设计

测试软件的复用性是摆在测试界面前亟待解决的重要问题。运用统一建模语言(Unified Modeling Language,UML)对测试软件进行建模,包括:测试系统的类图、软件功能分解、功能子系统的上下文模型、测试软件需求特征树以及软件功能子系统的顺序交互视图。在Visual C++6.0环境中,采用"应用程序框架+可复用构件"开发方式,实现了基于可复用构件的某型导发架测试系统应用软件组装,成功解决了导发架测试领域内同一系列产品间测试软件的可复用问题。     

C~4ISR系统互操作试验平台构建

C4ISR系统互操作试验是系统试验的重要组成部分,构建互操作试验平台则是满足该类试验的必要手段。美军的互操作试验与鉴定能力(InterTEC)主要由五个子系统组成,其平台的研发则包括螺旋开发三个阶段。通过对InterTEC组成和开发阶段的分析,研究得出互操作试验平台构建以及试验配置使用的理论方法。     

直接力/气动力复合作用动能拦截弹姿态控制方法

针对直接力/气动力复合作用动能拦截弹的姿态控制问题,建立了拦截弹俯仰-偏航通道短周期运动模型;利用线性二次型最优跟踪控制理论结合姿控固体小火箭点火逻辑设计了复合控制系统,通过分析非线性容限得出了该系统对直接力偏差具有强鲁棒性的结论;姿控回路仿真表明系统具有快速响应特性及良好的跟踪性能,考虑侧喷干扰效应等实际条件的六自由度弹道仿真表明所设计的控制系统能够满足拦截末段直接碰撞要求。