Shock model in Markovian environment

A Markov modulated shock models is studied in this paper. In this model, both the interarrival time and the magnitude of the shock are determined by a Markov process. The system fails whenever a shock magnitude exceeds a pre‐specified level η. Nonexponential bounds of the reliability are given when the interarrival time has heavy‐tailed distribution. The exponential decay of the reliability function and the asymptotic failure rate are also considered for the light‐tailed case. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

System reliability based on diffusion models for fatigue crack growth

Diffusion processes are commonly used to describe the dynamics of complex systems arising in a wide range of application fields. In this paper we propose, on the basis of diffusion processes, two models concerned with the stochastic behavior of fatigue cracks in a system. They are then used to get the distribution of the failure time, the first time the crack size of at least one of the cracks exceeds a given value. Several properties of our proposed models are presented, and the unknown parameters are estimated by the method of maximum likelihood. From these an estimate of failure time distribution is obtained. In this part, contrary to common practice, we do not assume availability of failure data. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

Optimal joint preventive maintenance and production policies

We study joint preventive maintenance (PM) and production policies for an unreliable production‐inventory system in which maintenance/repair times are non‐negligible and stochastic. A joint policy decides (a) whether or not to perform PM and (b) if PM is not performed, then how much to produce. We consider a discrete‐time system, formulating the problem as a Markov decision process (MDP) model. The focus of the work is on the structural properties of optimal joint policies, given the system state comprised of the system's age and the inventory level. Although our analysis indicates that the structure of optimal joint policies is very complex in general, we are able to characterize several properties regarding PM and production, including optimal production/maintenance actions under backlogging and high inventory levels, and conditions under which the PM portion of the joint policy has a control‐limit structure. In further special cases, such as when PM set‐up costs are negligible compared to PM times, we are able to establish some additional structural properties. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

On the effectiveness of returns policies in the price‐dependent newsvendor model

We study in this paper the price‐dependent (PD) newsvendor model in which a manufacturer sells a product to an independent retailer facing uncertain demand and the retail price is endogenously determined by the retailer. We prove that for a zero salvage value and some expected demand functions, in equilibrium, the manufacturer may elect not to introduce buybacks. On the other hand, if buybacks are introduced in equilibrium, their introduction has an insignificant effect on channel efficiency improvement, but, by contrast, may significantly shift profits from the retailer to the manufacturer. We further demonstrate that the introduction of buybacks increases the wholesale price, retail price, and inventory level, as compared to the wholesale price‐only contract, and that the corresponding vertically integrated firm offers the lowest retail price and highest inventory level. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

谈消防职业技能鉴定

为了适应社会发展和消防队伍建设的需要,建立消防职业技能鉴定机构是迫在眉睫的一项重要工作。改革、完善现有岗位工种的设置和资格认证是当务之急。应建立相应培训基地,建立和健全资格认证制度,完善消防从业政策,使各从事消防岗位工作的人员持证上岗,从而提高消防工作的质量,最大限度减少火灾损失。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Flow‐shop batch scheduling with identical processing‐time jobs

In many practical situations of production scheduling, it is either necessary or recommended to group a large number of jobs into a relatively small number of batches. A decision needs to be made regarding both the batching (i.e., determining the number and the size of the batches) and the sequencing (of batches and of jobs within batches). A setup cost is incurred whenever a batch begins processing on a given machine. This paper focuses on batch scheduling of identical processing‐time jobs, and machine‐ and sequence‐independent setup times on an m‐machine flow‐shop. The objective is to find an allocation to batches and their schedule in order to minimize flow‐time. We introduce a surprising and nonintuitive solution for the problem. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Sojourn times in a two‐stage queueing network with blocking

The model considered in this paper involves a tandem queue consisting of a sequence of two waiting lines. The main feature of our model is blocking, i.e., as soon as the second waiting line reaches a certain upper limit, the first line is blocked. The input of units to the tandem queue is the MAP (Markovian arrival process), and service requirements are of phase type. Our objective is to study the sojourn time distribution under the first‐come‐first‐serve discipline by analyzing the sojourn time through times until absorption in appropriately defined quasi‐birth‐and‐death processes and continuous‐time Markov chains. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Bounding the optimal burn‐in time for a system with two types of failure

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we consider the problem of determining bounds to the optimal burn‐in time and optimal replacement policy maximizing the steady state availability of a repairable system. It is assumed that two types of system failures may occur: One is Type I failure (minor failure), which can be removed by a minimal repair, and the other is Type II failure (catastrophic failure), which can be removed only by a complete repair. Assuming that the underlying lifetime distribution of the system has a bathtub‐shaped failure rate function, upper and lower bounds for the optimal burn‐in time are provided. Furthermore, some other applications of optimal burn‐in are also considered. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Two‐machine flow shop no‐wait scheduling with a nonavailability interval

We study a two‐machine flow shop scheduling problem with no‐wait in process, in which one of the machines is not available during a specified time interval. We consider three scenarios of handing the operation affected by the nonavailability interval. Its processing may (i) start from scratch after the interval, or (ii) be resumed from the point of interruption, or (iii) be partially restarted after the interval. The objective is to minimize the makespan. We present an approximation algorithm that for all these scenarios delivers a worst‐case ratio of 3/2. For the second scenario, we offer a 4/3‐approximation algorithm. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004