面向网络延迟均衡性的片上网络交叉开关分配策略

针对路由器中的交叉开关分配,提出面向网络延迟均衡性的分配策略,旨在通过更加公平的交叉开关分配策略提升网络延迟均衡性,从而进一步提升系统性能。通过在全系统模拟器上运行SPEC CPU2006实验表明,与传统的分离式分配策略和最新的TS-Router分配策略相比,延迟标准差分别平均降低了13. 8%和3. 9%,而最大延迟分别平均降低了45. 6%和15. 1%。在系统性能方面,相比于TS-Router,所提分配策略在IPC上平均提升了0. 8%。在分离式分配器的基础上完成了硬件实现,并给出了速度、面积和功耗方面的开销评估。     

IP组播在实时网络中的应用

本文简要介绍了IP组播的有关内容,通过试验总结了IP组播在实时网络中的硬件设置和软件编程,并结合Cisco交换机列举了实时网络抑制IP组播泛洪的一种方法,最后指出了IP组播技术的难点及应注意的事项。     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Research on fuze microswitch based on corona discharge effect

Abnormal voltages such as electrostatic, constant current, and strong electromagnetic signals can erro-neously trigger operation of MEMS pyrotechnics and control systems in a fuze, which may result in casualties. This study designs a solid-state micro-scale switch by combining the corona gas discharge theory of asymmetric electric fields and Peek's Law. The MEMS switch can be transferred from "off" to"on" through the gas breakdown between the corona electrodes. In the model, one of the two electrodes is spherical and the other flat, so a non-uniform electric field is formed around the electrodes. The theoretical work is as follows. First, the relation among the radius of curvature of the spherical electrode, the discharge gap, and the air breakdown voltage is obtained; to meet the low voltage (30-60 V) required to drive the MEMS switch, the radius of curvature of the spherical electrode needs to be 10-50 μm and the discharge gap between the two electrodes needs to be 9-11 μm. Second, the optimal ratio ε is introduced to parameterize the model. Finally, the corona discharge structural parameters are determined by comparing the theoretical and electric field simulation results. The switch is then fabricated via MEMS processing. A hardware test platform is built and the performing chip tested. It is found that when the electrode gap is 9 μm, the electrostatic voltage is at least 37.3 V, with an error of 2.6% between the actual and theoretical air breakdown voltages. When the electrode gap is 11 μm, the electrostatic voltage is at least 42.3 V, with an error of 10.5% between the actual and theoretical air breakdown voltages. Both cases meet the design requirements.     

KVM-OSD技术在指火控系统中的应用

为了满足军用集成运算环境对外部操控与显示设备的特殊要求,采用高分辨率视频切换技术、高速差分信号切换芯片与OSD字符叠加技术设计了KVM切换模块,并应用于指火控系统。该模块采用按键分别控制VGA视频与USB键盘、鼠标切换。经模块级、单元级与可靠性考核试验以及在指火控系统中的应用证明了该模块具有良好的稳定性与可靠性,方便了使用人员的操作。     

开关稳压电源中的功率变压器设计方法

阐述了开关电源功率变压器的特性、参数及公式 ,提出了对变压器和选择磁芯材料的要求 ,最后叙述了变压器的设计步骤及计算公式     

一种面向多制式路径规划的网络模型

随着综合交通运输与导航应用技术的发展,综合利用多种交通方式实施路径规划的应用需求日益迫切,传统的单一制式路径规划系统与服务正在向多制式的方向发展.然而,传统的路径规划模型与算法难以直接应用在多制式的条件下.针对多制式路径规划的特点,构建合理的数据模型是解决该问题的基础.为此,提出了制式切换点的概念,并以此为基础建立了包含多制式图集合、顶点属性表和切换点矩阵三个主要部分的多制式网络模型,并在真实的城市道路网数据集上进行了多制式网络构建实验.该工作能够从理论和实践两个方面为多制式路径规划算法的设计提供基础性的技术支持.     

新型军用模块化充电电源

为了弥补部队装备中充电设备技术落后、自动化水平低的缺点,介绍了利用高频开关管IGBT构成模块化充电电源的主电路、控制电路及保护电路的结构、原理。利用该项技术研制的移动式充电车与充电柜,极大地提高了部队的快速反应能力。     

高压纳秒脉冲形成电路的分析与设计

分析了储能线和储能电容脉冲发生器中各种因素对脉冲前沿的影响,比较了二者的优劣,并设计了一种储能线脉冲形成电路。初步的试验表明,该装置能产生脉宽为3～4ns的脉冲。     

基于系统构型替换的固冲发动机故障模式半实物仿真

为全面快速验证冲压发动机的故障检测算法,基于构型替换建立了能模拟多种固冲发动机故障的仿真验证平台。基于此平台,搭建了发动机点火故障模型、压强传感器故障模型、设备接口模型,以及与真实控制器中检测算法具有相同外部接口和系统构型的故障检测算法模型等。通过系统构型的切换,将同一个故障模式注入故障检测算法模型和真实发动机系统,并通过对比同一组故障模式下故障检测模型检测结果与发动机控制系统检测结果,来对发动机控制器中的故障检测算法进行快速验证。以无喷管助推器点火的检测为例,讲述了该方法的建模、实验验证及分析过程,此外,该方法还能应用到无喷管助推器关机、进气道前后堵盖打开、燃气发生器点火、燃气流量容错控制等多个故障模式的仿真模拟与验证,具有很强的通用性,能大大地降低控制系统开发与验证的时间成本,具有很强的应用价值。