基于云重心评价法的雷达辐射源威胁评估

在联合防空作战背景下,建立雷达辐射源的评估指标集,利用云重心评价法,通过云模型初始化、拟定系统状态、确定指标权重、计算加权偏离度和确定评估模型的评语集5个步骤对目标进行威胁评估。计算指标权重多数利用AHP法、环比法等,受主观因素影响较大,为减少人为因素的干扰,采用排队法计算各指标的权重。最后进行仿真和案例分析,表明该方法的有效性和实用性。     

对某型增压锅炉过热器热特性计算方法的修正

结合高增压锅炉蒸汽过热器管束中传热的计算方法和某高增压锅炉蒸汽过热器的结构特点,建立了该蒸汽过热器管束传热的数学模型,并对该过热器热特性的计算方法进行了修正,最终通过计算得到了该过热器后的烟气温度分布.     

分层流体中水平运动潜体产生的内波分析

从线性化的Euler方程和连续方程出发,采用线性自由面条件,通过傅里叶变换法研究水平运动点源在分层流体中产生的内波.利用源汇分布法分析运动潜体产生的lee波,采用稳定相法计算远场速度.计算结果表明,高模态内波的波域角小于低模态内波的波域角,内波的波域角小于Kelvin波的波域角;随航速增大lee波主要表现为散波.     

Analysis of the finite‐source multiclass priority queue with an unreliable server and setup time

In this article, we study a queueing system serving multiple classes of customers. Each class has a finite‐calling population. The customers are served according to the preemptive‐resume priority policy. We assume general distributions for the service times. For each priority class, we derive the steady‐state system size distributions at departure/arrival and arbitrary time epochs. We introduce the residual augmented process completion times conditioned on the number of customers in the system to obtain the system time distribution. We then extend the model by assuming that the server is subject to operation‐independent failures upon which a repair process with random duration starts immediately. We also demonstrate how setup times, which may be required before resuming interrupted service or picking up a new customer, can be incorporated in the model. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Effect of tongue clearance on hydraulic performance of double support vortex pump

In order to study influence of tongue clearance on the hydraulic performance of double support vortex pump, three dimensional flow model with symmetric variable size tongue clearance was established by changing section parameter of tongue clearance, and applied to numerically simulate the steady inner flow in a vortex pump based on fixed working conditions and impeller through ANSYS FLUENT. The numerical results show the influence of tongue channel with two sections (non-uniform and uniform sections) on flow field characteristics in vortex pump. Firstly, the variation of tongue channel section changes the vortex structure distribution in circumferential flow channel. Specifically the spiral forward vortex structure in the circumferential direction shifts to large radius side with increasing tongue width. Secondly, the circumferential velocity gradient and axial pressure gradient both diminish with the increase of the tongue section, and the inlet/outlet pressure difference and velocity distribution also reduce with increasing tongue channel section. Finally, for vortex pump with non-uniform section of tongue channel, the head diminishes and the efficiency remains constant approximately with the increase of the tongue width, while the head and the efficiency both diminish for uniform section of tongue channel.     

雷达组网系统仿真试验信息源软件研制

针对目前雷达模拟器不能满足雷达组网系统调试与模拟测试需求的问题,在分析雷达组网系统测试信息源功能需求的基础上,采用纯软件的实现方法,从体系结构、功能模块和信息流3个方面对系统进行了详细的设计,讨论分析了具体技术实现中的几个关键问题,给出了具体的仿真实例。系统测试结果验证了设计的合理性,该设计满足了雷达组网系统测试对目标和雷达控制灵活性等多方面的需求。     

纵向涡发生器对棒状燃料元件温度场的影响分析

运用CFD方法,模拟计算了在反应堆棒状燃料元件包壳表面加装纵向涡产生器(LVG)后,燃料棒、气隙、包壳和冷却剂的温度场和冷却剂的流场。计算时采用分块结构网格对带LVG的计算区域划分网格,使用SSTk-ω模型模拟冷却剂的湍流流动,对于控制方程和湍流方程的离散采用二阶格式以保证计算精度。计算结果表明:加装LVG后,包壳和冷却剂间的换热有所改善,燃料棒、气隙和包壳的最高温度有所降低。在LVG附近,燃料棒、气隙、包壳和冷却剂温度均会出现一个峰值,然后急剧下降。冷却剂流动的湍动能突然增强,有效地增强了冷却剂的横向流动,经过LVG后,湍动能逐渐减弱,横向流动速度也逐渐减小。     

q∝△(T~(-1))传热时三热源热泵的最优性能普遍关系

本文导出工质与三个热源间的传热系数分别为。α、β和γ,传热规律为q~∝△(T~(-1))时,内可逆三热源热泵的最佳供热系数ψ与供热率Π间的关系:ψ<1时,Π=K_1ψ[T_p(T_H-T_ο)-T_H(T_p-Tο)ψ]/[T_HT_pT_ο(1-△_1ψ)~2];ψ>1时,Π=K_2ψ[T_p(T_H-T_ο)-T_H(T_P-T_ο)ψ]/[T_HT_pT_ο(△_2-ψ)~2];式中,K_1=αγ/(α~(1/2)+γ~(1/2))~2,K_2=βγ/(β~(1/2)+γ~(1/2))~2,△_1=(α/β)~(1/2)(β~(1/2)-r~(1/2)/(α~(1/2)+γ~(1/2)),△_2=(β/α)~(1/2)(α~(1/2)-γ~(1/2))/(β~(1/2)+γ~(1/2))。由此可得许多有用的关系。     

传热规律对卡诺热泵有限时间(火用)经济最优性能的影响

本文导出了一种较为普遍的传热规律 q∝△(T~n)时内可逆卡诺热泵的最佳供热系数、利润率关系,并藉此讨论了几种传热规律时内可逆卡诺热泵的有限时间(火用)经济最优性能,得到了一些新的普适结果。     

饱和蒸气比热为负的讨论

本文由热力学理论定量指出,只要两相平衡的饱和蒸气比热为负,饱和蒸气经绝热膨胀后成过饱和蒸气,并讨论了饱和蒸气比热为负的条件。