美国陆军网络装备作战评估及启示

作战试验能有效地推动装备体系的建设发展,本文通过分析美国陆军网络集成评估与联合作战评估的作战试验特点,提出军队开展装备作战试验的几个建议。首先,总结了美国陆军网络集成评估到联合作战评估的发展演变,主要包括网络集成评估的地位和作用、网络集成评估的实施流程以及13次网络集成评估和3次作战评估的有关情况;其次,分析了网络集成评估的一系列作战试验特点,诸如实际作战需求牵引、逼真场景构建、试训一体化模式、部队战斗力的直接生成以及作战能力的军民融合式发展等;最后,提出了网络集成评估带来的若干启示,从满足实战能力需求开展作战试验、突出装备体系的互操作能力评估、探索试训结合的作战试验模式、组建专门的作战试验部队及鼓励工业部门参与作战试验等方面推动军队作战试验的发展。     

Performance evaluation and optimization design of photoelectric pyrometer detection optical system

The measurement and control of high temperature play very important roles in national defense, military, scientific experiments, industrial and agricultural production. Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement. It has an important application in the field of high temperature measurement, and its performance directly affects the accuracy of temperature measurement. By improving the design of the detection optical system of the photoelectric pyrometer, the imaging performance of the photoelectric pyrometer can be improved effectively, and the temperature measurement accuracy can be improved. In this paper, the temperature measurement principle of photoelectric pyrometer, the working principle of the detection optical system and the composition of the system are introduced. The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed. The optical pyrometer detection optical system is simulated by ZEMAX software, based on the analysis results, the Modulation Transfer Function (MTF) and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system. The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

Application of Markov renewal theory and semi-Markov decision processes in maintenance modeling and optimization of multi-unit systems

In this paper, a condition-based maintenance model for a multi-unit production system is proposed and analyzed using Markov renewal theory. The units of the system are subject to gradual deterioration, and the gradual deterioration process of each unit is described by a three-state continuous time homogeneous Markov chain with two working states and a failure state. The production rate of the system is influenced by the deterioration process and the demand is constant. The states of the units are observable through regular inspections and the decision to perform maintenance depends on the number of units in each state. The objective is to obtain the steady-state characteristics and the formula for the long-run average cost for the controlled system. The optimal policy is obtained using a dynamic programming algorithm. The result is validated using a semi-Markov decision process formulation and the policy iteration algorithm. Moreover, an analytical expression is obtained for the calculation of the mean time to initiate maintenance using the first passage time theory.     

OFDM系统中深度神经网络指导的IQ不平衡补偿算法

正交频分复用(Orthogonal Frequency Division Multiplexing,OFDM)是现代移动通信中一项重要的物理层通信技术,并且OFDM系统要求子载波间严格正交。然而,在实际系统中,振荡器和滤波器等器件的非理想特性会导致同相正交(In-phase and Quadrature-phase,IQ)不平衡,从而破坏子载波的正交性,严重影响OFDM系统的性能。通过研究IQ不平衡对OFDM系统的影响,提出了一种并联深度神经网络架构下的IQ不平衡补偿算法。该算法利用了深度神经网络不依赖于模型的特点,直接从接收到的频域信号恢复原输入信号的二进制序列,并利用干扰信号来自镜像子载波的先验知识来初始化模型驱动的神经网络,加快其网络优化的收敛速度。仿真结果表明,该算法能有效地补偿IQ不平衡失真,并且在幅度和相位失真的补偿上,其性能都优于传统的基于导频的最小二乘补偿算法,证明了深度学习方法解决物理层问题的优越性。     

飞机反区速度矢量不稳定及其控制的机理

在信号流图的基础上,提出多回路分析的方法,并用于研究反区时速度矢量不稳定及其稳定控制的机理。建立了纵向动力学的信号流图,并证明了一个回路的收敛性定理。在此基础上,通过理论分析得出了速度矢量不稳定在不同层面上的原因,也得出了速度和轨迹的发散度表达式等,并表明阻力-速度曲线、轨迹角-速度曲线、极曲线、阻力系数曲线等存在相互对应的反区和正区,并且阻力-速度曲线和轨迹角-速度曲线在斜率上成比例。研究得出进场动力补偿系统下速度矢量的稳定临界条件、收敛度、稳定机理等,理论分析和仿真比较了速度恒定进场动力补偿系统和迎角恒定进场动力补偿系统在控制性能上的差异。     

创新人才军民融合培养体系及其构建

创新人才军民融合培养构成人才强国战略、创新驱动发展战略和军民融合发展战略的交汇点。创新人才是战略资源,军民融合为创新人才培养提供了一条全新路径。作为一项系统工程,创新人才军民融合培养包括创新人才军民融合培养主体系统、创新人才军民融合培养客体系统、创新人才军民融合培养方案系统、创新人才军民融合培养资源系统、创新人才军民融合培养制度系统、创新人才军民融合培养考评系统,在系统构建过程中需加大统筹协调、投入保障、政策倾斜、法治保障、合理使用力度,注重体系推进。     

军民融合产业概念及范畴研究

军民融合产业概念及范畴不明确一直是困扰决策部门和研究部门的问题,影响了军民融合发展的顺利推进。本文在梳理总结军民融合产业概念及范畴的研究现状以及政府文件表述的基础上,认为军民融合作为一种发展模式,定义军民融合产业概念并非易事,但出于当前工作要求,需要相关管理部门整合力量,加强研究,尽快明确军民融合产业概念和范畴,构建科学合理的军民融合产业统计体系。     

采用PWPF调节器的再入飞行器最优控制分配方法

针对具有反作用控制系统(Reaction Control System,RCS)和气动舵两类控制机构的再入飞行器,提出一种基于脉宽脉频(Pulse-Width Pulse-Frequency,PWPF)调节器的最优控制分配方法。将RCS的输入信号转化为连续变化量,RCS与气动舵的控制分配问题被描述为二次规划问题,并采用有效集方法对其求解。采用离散法和PWPF调节器将优化结果转化为RCS的开关机状态。与混合整数规划问题相比,连续二次规划问题更容易求解,计算速度更快。通过对二次规划问题的重构,该算法能有效地应对故障情况。     

满足大动压模拟要求的试验弹道优化设计

为了解决弹道导弹在高海拔发射场进行飞行试验时的大动压检验问题,提出一种模拟大动压条件的试验弹道设计方法。针对发射场的实际特点,建立残骸再入的动力学模型与落区边界模型;将大动压模拟条件转化为过程约束,提出一种主动段联合优化策略。基于自适应模拟退火算法,分别设计了三组满足不同大动压模拟条件和各项约束的试验弹道,并给出了对应的落区调整方案,验证了该方法的可行性。设计结果表明,最大动压主要出现在一级,一级最大负攻角增加,则最大动压也明显提高;同时调整发射方位角和二、三级程序角可以保证试验弹道满足弹头落点约束条件。