液体火箭发动机故障诊断的命题逻辑方法

为对液体火箭发动机诊断知识的表达和组织提供一种简洁有效和易于处理的方式 ,通过以命题逻辑公式和子句的形式对系统观测信息和定性特征加以描述建立定性诊断模型 ,同时诊断问题基于归结原理和假言推理规则的演绎推理方法求解。基于试车数据的诊断结果表明方法具有较强的诊断能力。     

伞盘结构对大长径比发动机药柱结构完整性的影响

为了提高大长径比发动机药柱结构完整性水平,基于三维黏弹性有限元法,计算某大长径比固体发动机在温度和内压荷载联合作用下的结构响应;研究伞盘结构及其位置对药柱最大Von Mises应变的影响规律;讨论当伞盘位于药柱中部时,伞盘最大Von Mises应变随伞盘宽度、深度以及顶部圆弧半径比的变化规律。结果表明,伞盘位于药柱中部时可以有效地降低大长径比药柱的最大Von Mises应变,增加伞盘宽度、深度或选取合适的半径比均可降低伞盘结构的最大Von Mises应变。所得结论可为固体发动机设计提供参考。     

分数阶终端滑模控制器在DTC系统中的应用

针对SVPWM调制的永磁同步电机直接转矩控制系统磁链和转矩波动较大的问题,结合非奇异终端滑模和分数阶微积分理论的特点,设计了一种分数阶非奇异终端滑模控制器。结合直接转矩原理和分数阶微积分理论,对误差进行分数阶微分后与误差之和作为滑模面;根据非奇异终端滑模控制原理,在所设计分数阶滑模面的基础上确定了相应的控制律;利用李亚普诺夫定理证明了滑模面的稳定性和可达性。仿真结果表明,该策略能提高系统的动静态性能,可以进一步抑制磁链和转矩波动。     

基于SPRT的组合导航故障检测与隔离互辅算法

针对SPRT(序贯概率比检验)算法无法准确判断缓变故障结束时间的问题,提出了一种故障检测与隔离互辅算法。采用SPRT算法对滤波残差进行故障检测,确认故障后隔离故障观测量,重新建立卡尔曼滤波观测方程并完成量测更新,将隔离后的滤波结果作为下一时刻的滤波初值辅助故障检测。仿真结果表明,该方法能准确定位故障观测量并判断出故障的结束时间,提高了系统可靠性。     

大型电子装备层次诊断应用研究

根据电子装备诊断的特点,探讨了利用层次性理论对电子装备进行故障诊断的必要性和可行性,给出了层次性诊断中层间诊断和层内诊断的概念、原理及实现方法。首次将可列集的概念引用到层次诊断中,并给出了层次诊断中故障模式空间的选取原则,为层次诊断的工程实现和未来进行多信息诊断提供了基本框架。     

多次点火固体火箭发动机在面空导弹上的应用研究

论述了多次点火固体火箭发动机的多次点火的最佳控制,具体研究了两次点火固体火箭发动机的参数对飞行性能的影响,对两次点火固体火箭发动机结合弹道同时最佳化问题给出了仿真结果.     

一种基于程序域边界分析的测试方法

边界附近的点对程序故障更加敏感.针对这一特征,提出了一种基于程序域边界分析的测试方法.从被测程序本身出发,进行定义域确定及子域划分,分析定义域边界和子域边界,并跟据其边界测试点产生测试用例,以检测域边界附近的处理.实验表明对定义域边界及其子域边界进行测试,可有效地提高故障覆盖率.     

The “signature” of a coherent system and its application to comparisons among systems

Various methods and criteria for comparing coherent systems are discussed. Theoretical results are derived for comparing systems of a given order when components are assumed to have independent and identically distributed lifetimes. All comparisons rely on the representation of a system's lifetime distribution as a function of the system's “signature,” that is, as a function of the vector p= (p₁, … , p_n), where p_i is the probability that the system fails upon the occurrence of the ith component failure. Sufficient conditions are provided for the lifetime of one system to be larger than that of another system in three different senses: stochastic ordering, hazard rate ordering, and likelihood ratio ordering. Further, a new preservation theorem for hazard rate ordering is established. In the final section, the notion of system signature is used to examine a recently published conjecture regarding componentwise and systemwise redundancy. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 507–523, 1999     

无人机电磁弹射器的综合制动方法

利用直线电机实现无人机在短距离内可控地加速起飞已是固定翼无人机弹射起飞一种新的发展方向。为了使飞机分离后弹射台能在较短距离里完成制动,提出了直线电机弹射轨道末段定子实铁心涡流制动、运用Halbach永磁体阵列的涡流制动和橡胶阻尼制动等三种方式的综合方案,并分别对它们进行了分析计算。当弹射台的速度大于10m/s时,定子实铁心产生的涡流制动效果明显,当弹射台的速度低于3m/s时,定子实铁心涡流制动产生的制动力将迅速下降。Halbach永磁体阵列的涡流制动方式在飞机分离点开始实施,可以增加30%以上的制动效果。通过模型分析和碰撞试验,橡胶阻尼制动作为最后一级制动方式,能够有效吸收能量,实现在较短距离里的制动。     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.