鱼雷最大航向估计在反鱼雷中的应用

在悬浮式深弹反鱼雷时,若只能根据声纳兵的经验估计鱼雷距离,如何正确估计鱼雷航向角范围就成为正确布放悬浮式深弹的关键.从直航雷的相遇三角形和尾流鱼雷命中目标条件出发,推导出鱼雷相对舰艇的正常提前角,从而确定鱼雷在被发现点的最大航向角范围,为正确投放悬浮式深弹提供了理论依据.     

激光照射指示器束散角数字化检测方法研究

激光末端制导武器系统中,激光照射指示器出射激光的束散角是一个重要的参数。介绍了一种出射激光束散角的数字化检测方法。区别于传统的套孔法和反射靶板法,该方法通过CCD采集激光光斑,用质心法确定光斑中心,根据激光能量密度分布确定激光光斑半径,进而计算出待测的激光束散角。     

激光陀螺捷联惯导系统元件误差自标定技术

通过设计一种实用的激光陀螺捷联惯性导航系统自标定算法,保证在外场使用情况下,能对惯性器件误差(三个陀螺漂移和三个加速度计零位)进行精确标定,确保系统长期使用精度.在完成算法设计的基础上,进行了仿真计算,取得满意的仿真结果.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Effect of change of sand properties on travel distance of ricocheted debris

The debris from exploded buildings can ricochet after colliding with the ground, thus increasing the debris travel distance and danger from any associated impacts or collisions. To reduce this danger, the travel distance of ricocheted debris must be accurately predicted. This study analyzed the change in the travel distance of ricocheted concrete debris relative to changes in the properties of a sand medium. Direct shear tests were conducted to measure the change in internal friction angle as a function of temperature and water content of the sand. Finite element analysis (FEA) was then applied to these variables to predict the speed and angle of the debris after ricochet. The FEA results were compared with results of low-speed ricochet experiments, which employed variable temperature and water content. The travel distance of the debris was calculated using MATLAB, via trajectory equations considering the drag coefficient. As the internal friction angle decreased, the shear stress decreased, leading to deeper penetration of the debris into the sand. As the loss of kinetic energy increased, the velocity and travel distance of the ricocheted debris decreased. Changes in the ricochet velocity and travel distance of the debris, according to changes in the internal friction angle, indicated that the debris was affected by the environment.     

Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation

In current guidelines, the free air blast loads (overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design. However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads, three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design.     

烟幕在对抗红外与激光制导武器中的应用

光电对抗是现代高技术局部战争的热门话题,而烟幕则是光电对抗的一种重要手段。简要介绍了烟幕的分类和作用,分析了烟幕对抗红外与激光制导武器的工作原理。综述了国外烟幕装备的发展现状。结合目前主要烟幕装备的特点,给出了未来烟幕技术的发展趋势。     

区间正交小波变换域FLP算法及其在捷联寻北中的应用

针对机抖激光陀螺角随机游走和发动机干扰等影响静态捷联寻北精度的问题,提出了一种新的基于区间正交小波变换的前向线性预测算法。该算法利用前向线性预测技术以及区间正交小波变换抑制边界效应的能力,有效地减小了角随机游走和发动机干扰。车载实验证明该算法的有效性。     

低入射余角下雷达地杂波反射率模型

在常用雷达地杂波反射率模型的基础上,综合考虑雷达频率、地形种类和入射余角等对地杂波反射率的影响,建立了一个低入射余角下雷达地杂波反射率模型,并在不同的情况下,该模型与其他常用地杂波反射率模型相比较。结果表明:该雷达地杂波反射率模型更符合实际,进而证明了该模型的有效性和实用性。     

等离子体粒子模拟中的改进型Borris旋动粒子方法

将等离子体粒子模拟中得到广泛应用的Borris旋动粒子方法进行了改进,用于精确求解相对论Lorentz运动方程。这种改进型Borris旋动方法在模拟粒子在强磁场中的动力学行为时仍具有相当高的计算精度,且耗费计算量较小。将改进型Borris旋动方法应用于等离子体粒子模拟中,尤其适用于模拟超强激光与等离子体的相互作用。