机动车辆自动识别系统

基于视觉的机动车辆自动识别方法工程量小、检测范围大、系统安装相对灵活，是一种很有前途的方法。目前已开发的商业系统大都用在日间辅助交通管理上。为改善视觉交通检测系统的实用性和增强系统的功能，本文作者对模型系统进行了深入的理论研究，提出了２．５维图像的新思路，提取车辆外形的综和特征更为准确，自适应识别方案使车型识别准确灵活，车头颜色特征的利用使识别的准确性进一步提高。实验证明，系统对光线的适应能力也明显增强，系统的稳定性得到改善，有望扩大系统的使用范围。     

基于选择准则的参数模型评价方法

为评价参数模型的优劣,分析了模型信息量与数据被模型拟合后的残差信息量之间的关系,提出了综合考虑模型拟合残差大小、残差信息量与参数数目的一种模型选择的新方法RIA。结合RIA方法,定义了时序模型评价的一种准则,并以航天测量数据处理为例,说明了不同模型在工程实际中的不同表现和本质区别的意义所在。     

针对无线移动环境的音频同步视频连环画的自动生成

针对无线移动通信网络的客观制约,给出了一种音频同步的基于视频连环画模式摘要自动生成的实用视频服务方案,使得系统在向用户提交连续音频流的同时,能够随着网络带宽条件的变化,按照动态采样频率,基于视频内容选择重要帧递送,并按照与音轨同步的模式播放,从而在降低数据量的同时,满足用户对视频内容综合理解的需求。     

Efficient multinomial selection in simulation

Consider a simulation experiment consisting of v independent vector replications across k systems, where in any given replication one system is selected as the best performer (i.e., it wins). Each system has an unknown constant probability of winning in any replication and the numbers of wins for the individual systems follow a multinomial distribution. The classical multinomial selection procedure of Bechhofer, Elmaghraby, and Morse (Procedure BEM) prescribes a minimum number of replications, denoted as v*, so that the probability of correctly selecting the true best system (PCS) meets or exceeds a prespecified probability. Assuming that larger is better, Procedure BEM selects as best the system having the largest value of the performance measure in more replications than any other system. We use these same v* replications across k systems to form (v*)^k pseudoreplications that contain one observation from each system, and develop Procedure AVC (All Vector Comparisons) to achieve a higher PCS than with Procedure BEM. For specific small-sample cases and via a large-sample approximation we show that the PCS with Procedure AVC exceeds the PCS with Procedure BEM. We also show that with Procedure AVC we achieve a given PCS with a smaller v than the v* required with Procedure BEM. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 459–482, 1998     

捷联惯导位置更新中的多子样算法

以地理坐标系作为导航坐标系,推导了捷联惯导位置更新中的位置增量算法;提出了基于曲线拟合的多子样(二、三、四子样)涡卷补偿算法和位置旋转补偿算法.仿真结果表明,二、三、四子样涡卷补偿算法和位置旋转补偿算法都能有效地计算出涡卷补偿和位置旋转补偿值,并且二、三、四子样涡卷补偿算法和位置旋转补偿算法的精度依次提高.     

RLV再入标准轨道制导与轨道预测制导方法比较分析

提出只更新飞行剖面参数的航程更新方法及相应的RLV再入标准轨道制导规律;结合轨道在线生成与跟踪技术,采用Runge-Kutta-Fehlberg自适应变步长轨道快速预报方法,研究了RLV再入轨道预测制导。进一步对两种制导方法进行了比较分析研究,研究认为标准轨道制导与轨道预测制导都是可行的RLV再入制导方案,其有机结合是未来可重复使用跨大气层飞行器再入制导的发展趋势。     

基于位置预测的靶场图像实时判读方法

在靶场经纬仪对目标实时跟踪测量时,会发生相机随机抖动的情况,引起目标在图像中大幅度运动。应对大幅度运动时,基于搜索窗口的跟踪方法容易丢失目标,而基于全图搜索的跟踪方法时效性差。针对以上问题,提出一种结合核相关滤波算法(Kernelized Correlation Filter, KCF)和目标位置预测的改进的跟踪学习检测算法(Tracking-Learning-Detection, TLD)跟踪框架。利用正交多项式最优线性滤波器及相机角度信息预测目标下一帧位置,在此区域利用KCF进行快速跟踪,可以提高跟踪的成功率和时效性,跟踪失败时再进行检测。仿真实验表明,最优线性滤波器能较准确预测目标位置,给KCF提供较准确的搜索位置,算法每帧耗时仅为1.1 ms,且定位精度优于TLD和KCF,能有效应对相机抖动的问题。靶场实际试验证明该方法可提高靶场自动判读水平,减少人工干预。     

多管火箭武器储运发射箱长期储存蠕变性能预测

为探究火箭武器储运发射箱长期储存的蠕变性能,制备复合材料层压板并开展单轴拉伸蠕变试验,获得了单向纤维复合材料主方向的蠕变本构模型参数。采用有限元方法并借助用户自定义材料子程序建立储运发射箱长期储存蠕变的数值分析模型,预测了堆码储存15年后底层发射箱的蠕变变形。以储存后的发射箱作为初始状态建立弹管耦合发射动力学仿真计算模型,进一步分析蠕变对火箭弹发射过程的影响。仿真结果表明:蠕变引起的定向器平行度和发射箱底面平面度的变化均小于技术指标规定值,定向器束的最大残余变形在三维空间内呈马鞍状分布,上、下两行中间位置定向器的变形最大,左、右两列中间位置定向器的变形最小。定向器蠕变变形使得弹管间隙减小,火箭弹在管内运动使弹管之间的动态接触碰撞力增大,离轨速度降低。     

Pairwise model discrimination with applications in lifetime distributions and degradation processes

Reliability data obtained from life tests and degradation tests have been extensively used for purposes such as estimating product reliability and predicting warranty costs. When there is more than one candidate model, an important task is to discriminate between the models. In the literature, the model discrimination was often treated as a hypothesis test and a pairwise model discrimination procedure was carried out. Because the null distribution of the test statistic is unavailable in most cases, the large sample approximation and the bootstrap were frequently used to find the acceptance region of the test. Although these two methods are asymptotically accurate, their performance in terms of size and power is not satisfactory in small sample size. To enhance the small‐sample performance, we propose a new method to approximate the null distribution, which builds on the idea of generalized pivots. Conventionally, the generalized pivots were often used for interval estimation of a certain parameter or function of parameters in presence of nuisance parameters. In this study, we further extend the idea of generalized pivots to find the acceptance region of the model discrimination test. Through extensive simulations, we show that the proposed method performs better than the existing methods in discriminating between two lifetime distributions or two degradation models over a wide range of sample sizes. Two real examples are used to illustrate the proposed methods.     

电磁轨道发射中内弹道动力响应特性分析

将轨道简化为移动载荷作用下固定在弹性支撑上的Bernoulli-Euler梁,通过静态电磁-结构耦合有限元模型求得外围封装的等效刚度,计算得到发射器的临界速度。另外,利用混合有限元/边界元法建立电磁-结构-运动多物理场耦合的动力学模型,求得枢轨动态接触压力和轨道的应力应变分布特性。通过在轨道背面布置光纤光栅应变传感器,利用测量数据验证了动力响应特性,并分析了弹丸在内弹道的稳定性。针对典型30 mm × 30 mm矩形口径发射器,分析及试验结果表明：C型电枢对轨道的电磁挤压力在平顶沿起始时刻达到最大值,之后随着时间推移逐渐减小;电枢通过引起的应力波在高速段容易与轨道中反射应力波发生共振,并且轨道在电枢运动的中间高速段区域受力最为集中,应力集中水平约是起始低速段区域的2.44倍;电枢运动高速段会出现晃动现象,进而引起上下轨道受力的不对称性。分析及试验结果对研究电磁轨道发射器内弹道动力响应特性和发射器结构设计具有重要指导意义。