Landau相变中的自由能

Landau用序参量的幂级数展开来表示相变温度附近的自由能,强调对称性与序参量在相变中的作用.正确书写自由能形式,可以计算可能相的温度曲线,得到关于序参量的方程,从而推知系统的结构.     

随机滤波模型在变速箱剩余寿命预测中的应用研究

摘要：基于变速箱加速寿命实验的振动信号,提取信号的多种特征参量．通过分析各特征参量的敏感性和稳定性,选择幅域裕度指标、峰值指标、波形指标和RMS（RootMeanSquare）作为特征参量,建立一种基于随机滤波的变速箱剩余寿命预测模型,给出剩余寿命后验概率密度的递推公式,设计了极大似然估计方法求解模型参数,并经实例验证模型的有效性和实用性．     

随机共振在微弱信号检测中的数值仿真

对基于非线性双稳系统随机共振的微弱信号检测技术进行数值研究,利用随机共振机制,浸入在噪声中的微弱信号可以得到有效的放大与增强。给出了基于Runge Kutta算法的双稳系统随机共振模型的求解方法,提出了利用随机共振检测微弱非周期信号的一种新思路。数值仿真结果表明,该方法不仅可以检测出强噪声极低频的微弱周期信号,而且可以对非周期信号进行有效的检测。     

阶比谱分析与汽车起动电机故障的实时诊断

本文主要论述阶比谱分析方法及其在汽车起动电机故障实时诊断中的应用。首先阐述了阶比谱分析的原理以及阶比采样中混迭与泄漏的产生及其抑制方法,然后讨论了如何在起动电机运行过程短、升速快的情况下获取感兴趣的噪声信号,进而采用阶比谱分析方法从信号中提取故障特征信息,最后利用阀值判别法起动电机的故障进行实时诊断。     

论治安行政指导的性质及表现形式

从治安行政法律关系、治安行政指导依据分析探讨治安行政指导的性质,从治安行政性、治安性、主动性、方式多样性等方面探讨治安行政指导特征,并对其表现形式等理论问题进行研究,有利于治安行政指导基本问题的研究。     

具有变时滞的离散型随机BAM神经网络的稳定性

研究一类具有变时滞的离散型随机BAM神经网络。通过构造Lyapunov泛函以及线性矩阵不等式（LMI）,得出了离散系统全局渐近稳定的充分条件。     

基于随机网络的平均维修保障服务时间分析

利用随机网络建模方法在随机工程项目分析中的优越性,建立了不同保障方式下的维修保障过程模型。重点对网络活动中的维修等待时间和维修等待概率进行了分析,利用随机网络的解析算法,确定了维修力量的平均维修保障服务时间分析模型。最后将该方法应用于伴随修理过程,对其平均维修保障服务时间进行了案例分析。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Research on fuze microswitch based on corona discharge effect

Abnormal voltages such as electrostatic, constant current, and strong electromagnetic signals can erro-neously trigger operation of MEMS pyrotechnics and control systems in a fuze, which may result in casualties. This study designs a solid-state micro-scale switch by combining the corona gas discharge theory of asymmetric electric fields and Peek's Law. The MEMS switch can be transferred from "off" to"on" through the gas breakdown between the corona electrodes. In the model, one of the two electrodes is spherical and the other flat, so a non-uniform electric field is formed around the electrodes. The theoretical work is as follows. First, the relation among the radius of curvature of the spherical electrode, the discharge gap, and the air breakdown voltage is obtained; to meet the low voltage (30-60 V) required to drive the MEMS switch, the radius of curvature of the spherical electrode needs to be 10-50 μm and the discharge gap between the two electrodes needs to be 9-11 μm. Second, the optimal ratio ε is introduced to parameterize the model. Finally, the corona discharge structural parameters are determined by comparing the theoretical and electric field simulation results. The switch is then fabricated via MEMS processing. A hardware test platform is built and the performing chip tested. It is found that when the electrode gap is 9 μm, the electrostatic voltage is at least 37.3 V, with an error of 2.6% between the actual and theoretical air breakdown voltages. When the electrode gap is 11 μm, the electrostatic voltage is at least 42.3 V, with an error of 10.5% between the actual and theoretical air breakdown voltages. Both cases meet the design requirements.     

Approximating nondominated sets in continuous multiobjective optimization problems

Many important problems in Operations Research and Statistics require the computation of nondominated (or Pareto or efficient) sets. This task may be currently undertaken efficiently for discrete sets of alternatives or for continuous sets under special and fairly tight structural conditions. Under more general continuous settings, parametric characterisations of the nondominated set, for example through convex combinations of the objective functions or ε‐constrained problems, or discretizations‐based approaches, pose several problems. In this paper, the lack of a general approach to approximate the nondominated set in continuous multiobjective problems is addressed. Our simulation‐based procedure only requires to sample from the set of alternatives and check whether an alternative dominates another. Stopping rules, efficient sampling schemes, and procedures to check for dominance are proposed. A continuous approximation to the nondominated set is obtained by fitting a surface through the points of a discrete approximation, using a local (robust) regression method. Other actions like clustering and projecting points onto the frontier are required in nonconvex feasible regions and nonconnected Pareto sets. In a sense, our method may be seen as an evolutionary algorithm with a variable population size. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.