发动机运动件质量对燃油消耗率影响的分析

发展了一个发动机运动件质量对燃油消耗率影响的分析公式,进行了实例计算。在发动机设计阶段和发动机实际使用中,可以应用这个公式,估计运动件质量变化所引起的比油耗的相对变化。     

三轴MEMS加速度计的最大似然校正算法

加速度计是惯性导航系统的重要测量元件,而由于制造工艺及各类传感器误差,低成本加速度计很难达到要求的精度,因此需要对其进行校正。提出一种基于最大似然估计的加速度计自校正算法。综合考虑加速度计零偏、比例误差、非正交误差、安装误差与测量噪声,建立了传感器误差模型。在此基础上,将加速度校正问题转化为校正参数的最大似然估计问题。通过数值仿真和实测试验验证,表明算法具有较高的参数估计精度,能够有效地对上述因素引起的误差进行校正。     

The joint signature of coherent systems

We investigate the joint signature of $m$ coherent systems, under the assumption that the components have independent and identically distributed lifetimes. The joint signature, for a particular ordering of failure times, is an $m$‐dimensional matrix depending solely on the composition of the systems and independent of the underlying distribution function of the component lifetimes. The elements of the $m$‐dimensional matrix are formulated based on the joint signatures of numerous series of parallel systems. The number of the joint signatures involved is an exponential function of the number of the minimal cut sets of each original system and may, therefore, be significantly large. We prove that although this number is typically large, a great number of the joint signatures are repeated, or removed by negative signs. We determine the maximum number of different joint signatures based on the number of systems and components. It is independent of the number of the minimal cut sets of each system and is polynomial in the number of components. Moreover, we consider all permutations of failure times and demonstrate that the results for one permutation can be of use for the others. Our theorems are applied to various examples. The main conclusion is that the joint signature can be computed much faster than expected.     

Satellite constellation design for forest fire monitoring via a stochastic programing approach

There is significant value in the data collected by satellites during and after a natural disaster. The current operating paradigm in practice is for satellites to passively collect data when they happen to fly over a disaster location. Conversely, this article considers the alternative approach of actively maneuvering satellites to fly directly overhead of the disaster site on a routine basis. Toward this end, we seek to compute a satellite constellation design that minimizes the expected maneuver costs for monitoring an unknown forest fire. In this article, we present a 2‐stage stochastic programing model for this problem as well as a accelerated L‐shaped decomposition approach. A comparison between our approach and the current operating paradigm indicates that our solution provides longer duration data collections and a greater number of data collections. Analysis also shows that our proposed solution is robust over a wide array of scenarios.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

On vibration analysis of functionally graded carbon nanotube reinforced magneto-electro-elastic plates with different electro-magnetic conditions using higher order finite element methods

This article deals with evaluating the frequency response of functionally graded carbon nanotube rein-forced magneto-electro-elastic (FG-CNTMEE) plates subjected to open and closed electro-magnetic cir-cuit conditions. In this regard finite element formulation has been derived. The plate kinematics adjudged via higher order shear deformation theory (HSDT) is considered for evaluation. The equations of motion are obtained with the help of Hamilton's principle and solved using condensation technique. It is found that the convergence and accuracy of the present FE formulation is very good to address the vibration problem of FG-CNTMEE plate. For the first time, frequency response analysis of FG-CNTMEE plates considering the effect of various circuit conditions associated with parameters such as CNT dis-tributions, volume fraction, skew angle, aspect ratio, length-to-thickness ratio and coupling fields has been carried out. The results of this article can serve as benchmark for future development and analysis of smart structures.     

Mitigation effects on the reflected overpressure of blast shock with water surrounding an explosive in a confined space

The mitigation of blast shock with water has broad application prospects. Understanding the mitigation effects on the reflected overpressure of the explosion shock with water surrounding an explosive in a confined space is of great significance for military explosives safety applications. To estimate the effects of the parameters on the reflected overpressure of blasted shock wave, a series of experiments were carried out in confined containers with spherical explosives immersed in a certain thickness of water, and numerical simulations were conducted to explore the corresponding mechanisms. The results reveal that the reflected overpressure is abnormally aggravated at a small scaled distance. This aggravation is due to the high impulse of the bulk accelerated water shell converted from the explosion. With increasing scaled distance, the energy will be gradually dissipated. The mitigation effects will appear with the dispersed water phase front impacting at a larger scaled distance, except in the case of a dense water phase state. A critical scaled distance range of 0.7—0.8 m/kg1/3 for effective mitigation was found. It is suggested that the scaled distance of space walls should be larger than the critical value for a certain water-to-explosive weight ratio range (5—20).     

Numerical investigation on free air blast loads generated from center-initiated cylindrical charges with varied aspect ratio in arbitrary orientation

In current guidelines, the free air blast loads (overpressure and impulse) are determined by spherical charges, although most of ordnance devices are more nearly cylindrical than spherical in geometry. This may result in a great underestimation of blast loads in the near field and lead to an unsafe design. However, there is still a lack of systematic quantitative analysis of the blast loads generated from cylindrical charges. In this study, a numerical model is developed by using the hydrocode AUTODYN to investigate the influences of aspect ratio and orientation on the free air blast loads generated from center-initiated cylindrical charges. This is done by examining the pressure contours, the peak overpressures and impulses for various aspect ratios ranged from 1 to 8 and arbitrary orientation monitored along every azimuth angle with an interval of 5°. To characterize the distribution patterns of blast loads, three regions, i.e., the axial region, the vertex region and the radial region are identified, and the propagation of blast waves in each region is analyzed in detail. The complexity of blast loads of cylindrical charges is found to result from the bridge wave and its interaction with primary waves. Several empirical formulas are presented based on curve-fitting the numerical data, including the orientation where the maximum peak overpressure emerges, the critical scaled distance beyond which the charge shape effect could be neglected and blast loads with varied aspect ratio in arbitrary orientation, all of which are useful for blast-resistant design.     

用能量法确定层状复合材料疲劳裂纹的扩展方向

含裂纹体疲劳寿命的预测,必须首先了解裂纹扩展路径的全过程,而在层状复合材料中,裂纹扩展的路径非常复杂,不仅可以拐弯,而且可以分叉.因此,首先提出一个简单、适用、统一的裂纹扩展方向的相对强度准则,即应变能释放率比值判据;然后,利用有效解决高梯度问题的数值方法--任意线法,对实测试件的关键时刻(例如,拐弯或进入界面),进行了数值分析;并对典型试件进行了疲劳断裂实验研究.3方面的结果,得到相互的验证.这种一致性,不仅初步证明了这一方法的正确性和适用性,而且为疲劳裂纹扩展全过程的解决,提供了必要的基础.     

A comparative study of three tool replacement/operation sequencing strategies in a flexible manufacturing system

This paper studies three tool replacement/operation sequencing strategies for a flexible manufacturing system over a finite time horizon: (1) failure replacement—replace the tool only upon failure, (2) optimal preventive tool replacement for a fixed sequence of operations, and (3) joint scheduling of the optimal preventive tool replacement times and the optimal sequence of operations. Stochastic dynamic decision models are used for strategies 2 and 3. The optimization criterion for strategies 2 and 3 is the minimization of the total expected cost over the finite time horizon. We will show through numerical studies that, with the same amount of information, the total expected costs can be reduced considerably by choosing an optimal strategy. Our conclusion is that in flexible manufacturing, optimal tool replacement and optimal operations sequencing are not separate issues. They should be considered jointly to minimize the expected total cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 479–499, 2000