军用飞机综合效能/费用评估方法

军用飞机的效能与费用是两个相互制约的因素,对两者进行科学合理的综合评估,对于军用飞机的发展和使用有着很重要的意义。在分析综合效能/费用的基本评估指标基础上,提出了在军用飞机全寿命周期综合效能/费用评估指标,重点对作战使用阶段的最佳效能/费用进行评估分析,最后给出结论。     

高师公共课心理学的教学改革探讨

公共课心理学是体现师范特色的重要必修课,但在课程安排、教材内容、教师、教学方法和教学效果方面还存在着一些问题。针对这些问题,研究者们主要对教学体系和教材进行了改革,本文也根据教学实际提出一些具体的改革措施和建议。     

一类微分方程组极限环的不存在性

在系统奇点唯一的条件下,研究了一类微分方程组不存在极限环的的充分条件,运用和发展了以往的结果。     

一类非线性脉冲时滞抛物型偏微分方程组解的振动性

讨论了一类含脉冲的时滞抛物型方程组非零解的振动性,利用了Green定理以及Jensen不等式,得出了该方程在Robin边界条件下非零解振动的若干准则。     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

光滑物体表面反射光偏振特征分析及反射光分离技术

物体表面反射光由镜面反射光和漫反射光组成,针对光滑物体表面镜面反射光和漫反射光的分离问题,建立了一个结合镜面反射和漫反射共同作用的偏振态表征模型,并使用该模型对混合反射区域偏振特征进行分析。基于镜面反射光和漫反射光的偏振特征,根据镜面反射光和漫反射光在光滑物体表面垂直方向及平行方向上的分布关系,采用偏振正交分解的方法实现了镜面反射成分和漫反射成分的求解。利用镜面反射光图像和漫反射光图像之间的相关性,通过梯度下降算法得到镜面反射成分和漫反射成分归一化互相关最小值及其对应的镜面反射偏振度和漫反射偏振度,从而实现反射光的分离。通过对不同场景中获取的反射光图像进行测试,实验结果表明,该算法具有较好的反射光分离效果。     

Bang-Bang控制方式旋转导弹气动特性数值分析

为研究Bang-Bang控制式鸭舵对旋转导弹气动特性的影响,在CFD软件中采用嵌套网格方法模拟导弹的旋转和鸭舵的偏转,对Bang-Bang控制式旋转导弹在不同攻角、马赫数和转速下的气动特性进行了数值模拟,得到了气动特性变化规律。研究表明,因鸭舵洗流方向的改变,耦合导弹自旋会导致弹体和尾翼的侧向力发生突变。通过与不控鸭舵的旋转导弹进行对比,采用Bang-Bang控制式鸭舵的旋转导弹的周期平均侧向力系数变小,周期平均法向力系数变大。由于侧向力的存在,导弹在一个周期内的合力会偏离竖直方向,合力偏离竖直方向的角度随着马赫数、自旋速率和攻角的增大而减小。     

一类生化反应动力系统的极限环

研究生化反应中一类饱和反应的数学模型dxdt =a1 -xy a2 y2dydt=a3 xy-a2 y2 - vyy b应用微分方程定性理论 ,完整地解决了该系统极限环的存在性、唯一性和不存在性等问题。     

Estimating distribution functions from partially observed samples

Suppose that some components are initially operated in a certain condition and then switched to operating in a different condition. Working hours of the components in condition 1 and condition 2 are respectively observed. Of interest is the lifetime distribution F of the component in the second condition only, i.e., the distribution without the prior exposure to the first condition. In this paper, we propose a method to transform the lifetime obtained in condition 1 to an equivalent lifetime in condition 2 and then use the transformed data to estimate F. Both parametric and nonparametric approaches each with complete and censored data are discussed. Numerical studies are presented to investigate the performance of the method. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 521–530, 2000     

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete (RC) columns are widely used as supporting structures for high-piled wharfs. The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharf’s antiknock security. In this study, the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models. Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m, under different explosive quantities (0.025 kg–1.6 kg), stand-off distances (0.0 m–7.0 m), and detonation depths (0.25 m–2.0 m). The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure, acceleration, strain, and displacement. Then, the load distribution characteristics, time history of test data, and damage models related to present conditions were obtained and discussed. Three damage models, including bending failure, bending-shear failure and punching failure, were identified. In addition, the experience model of shock wave loads on the surface of a RC column was proposed for engineering application.