基于解析算法的声纳浮标搜潜系统定位精度分析

针对基于位置时间参数解析算法的声纳浮标阵搜潜系统的定位精度问题,采用定性和定量分析相结合的方法展开了研究。从解析定位模型出发,首先定性分析浮标自身的定位误差与传感器测时误差对航速及航向角计算的影响;然后选取评价指标,采用蒙特卡洛方法进行了仿真分析,得到了不同仿真条件下各个因素对定位精度具体的影响关系,这些结论为根据精度参数合理选择浮标阵的数量及布放阵型提供了依据。     

侦察图像综合利用技术研究

侦察图像的综合利用是实现远程精确打击的重要基础,在现代战争中具有不可替代的作用。分析了远程精确打击的作战需求,综合描述了国外相关研究现状,研究了空中侦察图像综合利用涉及的主要问题。在分析关键技术基础上,给出了初步解决方案。     

坦克外壳对内部电磁波的影响及其振荡干扰波型的数值计算

在坦克的金属立方体盒子模型下,分析了坦克外壳对内部电磁波的影响,并对Lc型电路激发的电磁波在坦克内部形成的振荡波型进行了计算,分析了该类电磁振荡波对坦克内部其他电子元件产生电磁干扰的作用机理,对一种最低频率的谐振波型进行了仿真模拟,提供了对坦克内部电磁波电场分量及磁场分量的一种分析计算方法,为研究坦克内部电子设备的电磁干扰规律提供了思路,对提高坦克的电磁兼容性能具有一定参考意义。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

基于主动视觉的摄像机自标定方法

在研究了基于主动视觉摄像机自标定原理的基础上,结合现有的3次平移自标定方法,给出了该标定方法的实现过程。对影响标定精度的主要因素进行分析,提出了极点计算误差对标定精度的影响机理,并在此基础上提出了通过减小极点计算误差来提高标定精度的方法。最后利用该方法进行了对比实验,实验结果证明该方法是有效的。     

激光式头盔瞄准具瞄准线数学模型的建立

激光式头盔瞄准具具有结构简单、截获目标速度快、抗干扰能力强、便于实现光电转换的优点.为了进一步加深对激光式头盔瞄准/显示系统瞄准线解算技术的研究,建立了该系统瞄准线的数学模型,从而计算出头盔的方位角和俯仰角,并对相关的误差和系统的精度进行了分析估算,实践表明该模型对瞄准线的解算是完全满足要求的.     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

基于效能的舰艇电子对抗训练效果评估方法

摘 要：为解决舰艇电子对抗专业训练缺乏统一评估标准与方法体系等实际评估难题;采用系统分析方法结合舰艇电子对抗专业训练实际;研究提出了基于“任务要求分解”的作战效能量化指标体系构建方法、训练效果表达方法及实用评估指标体系、定量指标评估模型、评估标准等舰艇电子对抗训练效果评估方法体系;能够满足专业训练效果评估所需,对其它专业军事训练效果评估工作亦具有借鉴意义。     

Experiment and simulation of launching process of a small-diameter steel cartridge case

In order to explore the rules of the deformation force during the launching of a small-diameter steel cartridge, the semi-closed bomb test method is used to test the greatest strains on chamber outer wall under the different chamber pressures. The pressure curves of cartridge chamber are measured in experiment, and the tensile test data of cartridge are loaded into the numerical calculation to compare with the experimental data. The conclusion was obtained that the calculated results match better with the experimental results by considering strain rate bilinear kinematic hardening material constitutive model. The forces on the various parts of the cartridge during launching and their deformation rules are achieved, in which the equivalent plastic strain decreases and the cylinder ring withstands the maximum equivalent stress when the cartridge case clings to the bore from the mouth to the bottom.     

On the continued acceleration of bomb casing fragments following casing fracture

It has been said that, once a bomb casing has fractured, “detonation gases will then stream around the fragments or bypass them, and the acceleration process stops there.” However, while apparently copious gas flow through casing fractures indicates some pressure release, it is also an indication of significant gas drive pressure, post casing fracture. This paper shows two approaches to the problem of calculating the actual loss of drive. One presents first-order analytical calculations, in cylindrical geometry, of pressure loss to the inside surface of a fractured casing. The second shows the modelling of a selected example in the CTH code. Both approaches reveal that gas escape, while occurring at its own sound-speed relative to the adjacent casing fragments, has to compete with rapid radial expansion of the casing. Together with some historic experiments now publicly available, our calculations indicate that post-fracture casing fragment acceleration is, for most systems, unlikely to be reduced significantly.