航空发动机在超声速引射系统中的应用分析

航空发动机可以对空气增压,并且增加气流温度,理论上存在应用于超声速引射系统的可能。分析了气源对引射器性能的影响以及引气对航空发动机的影响,介绍了3种航空发动机在超声速引射系统中可能的布局方案。针对某领域内的排气参数要求,分别对3种布局方案进行了计算分析。计算结果表明,当上游气体压强为0.044×10⁵ Pa和0.029 3×10⁵ Pa时,通过合理选择发动机的布局以及工作参数,发动机可以直接将上游气体排出或者作为驱动气源应用于超声速引射系统。     

平行双线式电火工品感应电流仿真研究

根据Agrawal理论,建立平行双线式电火工品的传输线模型,通过仿真计算分析外界电磁场和电火工品各物理参数对负载端感应电流大小的影响,为电火工品的射频安全性研究提供一定的参考．     

一种新的针对模型误差所致滤波发散的补偿方法

系统模型误差是导致卡尔曼滤波发散的一个很重要的原因,分析了衰减记忆法和限定记忆法两种对模型误差所致滤波发散的补偿方法,通过引入阈值可以将这两种方法进行有机结合,给出了一种新的衰减限定记忆算法。算例分析验证了衰减限定记忆算法在抑制滤波发散方面具有比衰减记忆和限定记忆法更好的性能,并能自适应调整算法所需观测数据数目。     

A Dangerous Method: How Mali Lost Control of the North,and Learned to Stop Worrying

Abstract

This article analyses changes and failures in the northern Mali system of security governance, taking into account the period running from the declaration of the Malian Third Republic (1992) to the present. Considering northern Mali as an area of limited statehood, the article develops a comparative diachronic analysis, distinguishing between three phases, namely Militiarisation (1992–2002), Fragmentation (2002–2012) and Multiplication (2013–ongoing). For every phase the focus is on (1) the mechanisms of coordination among actors, (2) the distribution of coercive capacities and ruling power and (3) the forms of authority. Unintended consequences and collective problems are highlighted, in order to understand the current situation of insecurity in the area.     

一类飞行器载荷设计的三分段方法研究与应用

为有效解决传统载荷设计方法中存在的诸多不足,提出一种适用于一类飞行器载荷设计的三分段法,即分段刚度、分段质量和分段气动。该方法能够很好地逼近飞行器的真实质量分布和气动载荷分布。针对简化飞行器,分别利用三分段法、理论计算法和质量分站法计算其模态参数和截面载荷。结果表明,三分段法和理论计算法在模型参数、计算原理上是一致的,基本可以认为是一种方法,因而它们的模态参数和截面载荷完全吻合;质量分站法所得左、右截面载荷不一致,且相差很大,还不符合真实载荷情况。总之,采用三分段法能够得到较为真实、合理的飞行器截面载荷分布,且工程应用简便,方法合理、可信,同时还可以在很大程度上降低飞行器载荷设计和结构设计的难度。     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

非线性隔冲系统最大响应的计算方法

提出了一种计算具有三次方非线性刚度的单自由度隔冲系统最大响应的方法 ,该方法将计算过程分成冲击作用阶段和自由衰减振动阶段 .在冲击作用阶段中 ,认为系统的冲击刚度为常数 ;在自由衰减振动阶段中 ,考虑系统的刚度非线性 ,用迭代法推导出了系统最大位移和最大加速度的一阶近似表达式 .据此可用数值计算的方法求出系统的最大位移和最大加速度     

提高CCD作探测器的传函仪测量精度的方法分析

对CCD作探测器的光学传函仪产生测量误差的主要原因进行分析 ,给出了每一种误差因素的消除方法。采用这些消除方法 ,可大大提高传递函数的测量精度     

带有状态噪声的限定记忆卡尔曼滤波方法

在已有限定记忆卡尔曼滤波方法的基础上 ,引入状态噪声 ,并推导了新的限定记忆卡尔曼滤波公式。从而降低了记忆长度的选取难度 ,扩大了已有模型的适用范围     

Na_2SO_4·10H_2O相变过程及其相变潜热的计算

利用CDR-34P差动热分析仪测试Na2SO4·10H2O相变前后的热效应,结合Na2SO4-H2O体系的二元相图,分析相变前后热效应的来源及体系相态、组分的变化;提出无机水合盐相变潜热除来源结晶水脱离外还包括固相物质溶解、溶液浓度梯度变化的热效应的观点;根据上述相变过程计算Na2SO4·10H2O相变潜热,误差仅为2%.