有理真分式积分方法探析

利用配方法,待定系数法等方法求解有理真分式的积极分问题.     

不同加载方法对甲板大开口分段有限元计算的误差分析

利用ＭＳＣ－ＮＡＳＴＲＡＮ有限元程序模拟计算甲板大开口的应力．建立简单的总体和分段力学模型,采用不同的加载方法进行甲板应力计算,将局部应力计算结果与整体应力计算结果比较,得出各种加载方法有限元计算的误差,从而给出误差小、建模简单的局部分段模型加载的最佳方法．     

密切值法用于海军舰船招标工程的评价

根据海军舰船招标工程涉及的各个方面 ,建立舰船招标工程评价指标体系 ,运用密切值法对海军舰船招标工程进行评价 ,为舰船招标工程评价提出新的方法     

舰船推进轴系设计方案的综合评估

探讨了将多目标决策理论应用于舰船推进轴系设计方案综合评估的方法 ,建立了推进轴系设计方案的多层次评估模型 ,讨论了基于层次分析法评估指标权值确定的矢量计算方法 ,给出了运用模糊隶属函数的底层典型定量指标的确定方法 .文中论述的方法对舰船推进轴系设计方案的科学评估决策具有实用价值     

某型光电头盔瞄准具原理误差的校正

就某型光电头盔瞄准具扫描部件光学系统具体结构 ,分析研究了其头位测量中十棱镜反射面非共面定轴转动所致原理误差 ,导出了基线校正、测角校正两种校正公式。前者与原技术资料所给出的结果完全吻合 ,后者已成功应用在改型的光电头盔瞄准具中。     

传递矩阵法在连续系统中的作用

在分析离散系统振动时,传递矩阵法是一种重要的方法。将传递矩阵法应用到具有分布质量的连续系统中,给出了具有Rayleigh阻尼形式的梁在随机激励作用下响应分析。     

正弦波型直流无刷电动机位置伺服系统的变结构控制

在分析正弦波型直流无刷电动机数学模型的基础上,采用比例等速变速控制策略(PCV)设计控制器,应用于正弦波型直流无刷电动机位置伺服系统.仿真结果表明:与传统PI控制器比较,PCV控制策略可以明显改善系统的品质,并增强系统的鲁棒性.     

59D坦克火控系统的校准操作研究

通过分析坦克射击准备误差诸因素的地位变化情况,得出火控系统校准误差是影响首发命中的关键因素.在此基础上,重点研究了59D坦克火控系统的校准操作程序和方法,所得结论对部队科技练兵具有一定的指导意义.     

Steady-state analysis of load balancing with Coxian-2 distributed service times

This paper studies load balancing for many-server (N servers) systems. Each server has a buffer of size b ? 1, and can have at most one job in service and b ? 1 jobs in the buffer. The service time of a job follows the Coxian-2 distribution. We focus on steady-state performance of load balancing policies in the heavy traffic regime such that the normalized load of system is λ = 1 ? N^?α for 0 < α < 0.5. We identify a set of policies that achieve asymptotic zero waiting. The set of policies include several classical policies such as join-the-shortest-queue (JSQ), join-the-idle-queue (JIQ), idle-one-first (I1F) and power-of-d-choices (Po d) with d = O(N^α log N). The proof of the main result is based on Stein's method and state space collapse. A key technical contribution of this paper is the iterative state space collapse approach that leads to a simple generator approximation when applying Stein's method.     

Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.