加油车加油系统瞬变流数值分析

针对加油车加油系统管路结构,利用特征线法和有限差分格式,对2种典型加油工况建立数学模型。用C#语言编制程序,对2种工况的泵出口压力和系统流量进行数值分析,得到压力和流量随时间变化的关系曲线。计算结果表明:单枪加油工况出现压力波动时间较早,且压力波动幅值较大。此方法更好地反映了加油系统的动态变化过程,为加油车虚拟训练系统的开发提供了理论依据。     

多轴特种车辆轮胎系统抗毁伤能力等毁线表征方法

为了探究战场威胁下多轴特种车辆轮胎系统的生存概率,对轮胎系统的抗毁伤能力进行量化表征,提出了一种基于等毁线的轮胎系统抗毁伤能力表征方法。针对轮胎毁伤状态下对整车的影响,基于车辆动力学对轮胎系统的力学特性进行量化表征,建立了轮胎系统功能毁伤的计算模型;采用毁伤理论对冲击波超压场进行弹目交会和量化分析,建立了轮胎系统物理毁伤的计算模型;根据爆心与车辆的位置关系,采用面向车辆全面域的计算特征线,建立了轮胎系统等毁线计算模型。以某型五轴特种车辆为例,进行了表征方法验证。研究结果表明:该表征方法可应用于战场威胁下多轴特种车辆轮胎系统的抗毁伤能力表征,为后续机动规避和防护能力提升奠定模型基础。     

泵喷推进器线谱非定常推力预报方法与试验验证

为预报泵喷推进器转子与周期性前导叶尾流互作用线谱非定常推力,忽略泵喷推进器转子叶片厚度,将泵喷转子简化为环形叶栅,根据片条理论,在半径r处截取泵喷转子分段,忽略流场参数沿分段径向的变化,从而可将该环形叶栅分段视为平面叶栅,在平面叶栅与简谐波互作用的基础上考虑周期性进流,推导得到前导叶分段与转子分段互作用线谱非定常激振力,转子分段周向积分得到非定常推力线谱预报公式,通过数值和试验方法验证公式的有效性。开展设计参数影响分析,得到当前导叶-转子间距与前导叶弦长的比值大于1时,转子-后导叶间距对转子单个叶片的激振力线谱推力几乎不存在影响。     

面向计算流体力学的图形处理器资源管理

针对求解计算流体力学过程中图形处理器资源利用率低的问题,提出面向计算流体力学的图形处理器资源优化管理方案。基于计算流体力学的算法特性和同时运行任务的执行特点,设计合理的调度方案。通过动态改变不同任务的启动规模和启动时间,在减少资源竞争的同时提高图形处理器资源的有效使用。实验结果表明:本文提出的资源管理方案相比基线方法在不同任务规模下的平均加速比达到 1.64,对图形处理器的硬件资源使用也有了显著的提升。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

A pixel-level local contrast measure for infrared small target detection

Infrared (IR) small target detection is one of the key technologies of infrared search and track (IRST) systems. Existing methods have some limitations in detection performance, especially when the target size is irregular or the background is complex. In this paper, we propose a pixel-level local contrast measure (PLLCM), which can subdivide small targets and backgrounds at pixel level simultaneously. With pixel-level segmentation, the difference between the target and the background becomes more obvious, which helps to improve the detection performance. First, we design a multiscale sliding window to quickly extract candidate target pixels. Then, a local window based on random walker (RW) is designed for pixel-level target segmentation. After that, PLLCM incorporating probability weights and scale constraints is proposed to accurately measure local contrast and suppress various types of background interference. Finally, an adaptive threshold operation is applied to separate the target from the PLLCM enhanced map. Experimental results show that the proposed method has a higher detection rate and a lower false alarm rate than the baseline algorithms, while achieving a high speed.     

基于子结构及模态柔度曲率差的某框架结构损伤识别

基于子结构思想,通过对框架结构中子结构的边界施加虚拟的数值支座,限制子结构边界的位移,把子结构从整体结构中隔离出来.运用提出的模态柔度曲率差方法对予结构进行了损伤识别.结果表明:该方法仅需低阶模态参数即可进行损伤识别,不论对单一位置损伤,还是多种共存的损伤,均具有损伤定位的能力,并能定性反映损伤程度.与已有的柔度差、柔...     

基于GSPN的编队网络化防空指挥流程研究

为了提高编队指挥员在信息化海战中的作战指挥效率和应变能力,利用广义随机Petri网与马尔可夫链的等价关系,得到一种Petri网与马尔可夫链理论相结合的指挥流程时间性能分析的新方法,通过对模型进行分析与求解,得出了舰艇编队网络化防空作战指挥流程活动的准确作战周期,从而为指挥流程的优化提供有力的支撑,对评估系统效能水平也具有重要指导意义。     

虚拟试验光传输环境通用支撑软件设计

根据光电对抗虚拟试验的实际需要,分析了虚拟试验光传输环境模型,设计了一种能为光电对抗虚拟试验提供光传输环境服务的通用支撑软件。研究了能集成现有光传输效应模型的软件框架,设计了基于组件对象模型和通信代理技术的环境服务通用接口及符合综合自然环境数据表示与交互规范(SEDRIS)的环境数据库访问接口,最后介绍了软件在光电对抗虚拟试验系统中的应用流程。实际表明,支撑软件能为更科学、合理地评价光电对抗虚拟试验效果提供有力支持。     

MFSK/FFH系统分集合并算法性能对比研究

推导了部分频带干扰最佳干扰系数表达式并进行了仿真验证,描述了多进制频移键控/快跳频(MFSK/FFH)系统、衰落信道和分集合并算法模型,在最坏部分频带干扰和衰落信道下,仿真对比了MFSK/FFH系统采用线性分集合并、限幅线性分集合并、自归一分集合并、排序统计自归一分集合并、乘积分集合并5种分集合并算法时的误码率性能,结果表明:在最坏部分频带干扰和衰落信道下,线性合并性能较差,其他4种算法性能较为相似,Rayleigh衰落信道中排序统计自归一分集合并和乘积分集合并算法性能最优。