Shaped charge penetration into high- and ultrahigh-strength Steel–Fiber reactive powder concrete targets

Experiments on shaped charge penetration into high and ultrahigh strength steel-fiber reactive powder concrete (RPC) targets were performed in this paper. Results show that the variation of penetration depth and crater diameter with concrete strength is different from that of shaped charge penetration into normal strength concrete (NSC). The crater diameter of RPC is smaller than that of NSC penetrated by the shaped charge. The jet particles are strongly disturbed and hardly reach the crater bottom because they pass through the narrow channel formed by jet penetration into the RPC. The effects of radial drift velocity and gap effects of jet particles for a shaped charge penetration into RPC target are discussed. Moreover, a theoretical model is presented to describe the penetration of shaped charge into RPC target. As the concrete strength increases, the penetration resistance increases and the entrance crater diameter decreases. Given the drift velocity and narrow crater channel, the low-velocity jet particles can hardly reach the crater bottom to increase the penetration depth. Moreover, the narrow channel has a stronger interference to the jet particles with increasing concrete strength; hence, the gap effects must be considered. The drift velocity and gap effects, which are the same as penetration resistance, also have significant effects during the process of shaped charge penetration into ultrahigh-strength concrete. The crater profiles are calculated through a theoretical model, and the results are in good agreement with the experiments.     

一种直线段匹配的新方法

直线特征在人造目标和环境中普遍存在,直线段的匹配是三维重建等应用领域的首要解决问题.一般单直线的匹配方法难以解决被部分遮挡直线的匹配问题,提出了一种基于极线约束和RANSAC算法的匹配方法.对直线段上的点运用基于极线约束的匹配方法在另一幅图像中进行点的同名匹配,采用RANSAC算法建立直线模型,剔除野值,得到匹配直线段.本方法能有效地解决图像中被部分遮挡直线段的匹配问题,仿真实验和实际图像实验证实了本算法的正确性和高精度.     

The effectiveness of the longest delivery time rule for the flow shop delivery time problem

In the flow shop delivery time problem, a set of jobs has to be processed on m machines. Every machine has to process each one of the jobs, and every job has the same routing through the machines. The objective is to determine a sequence of the jobs on the machines so as to minimize maximum delivery completion time over all the jobs, where the delivery completion time of a job is the sum of its completion time, and the delivery time associated with that job. In this paper, we prove the asymptotic optimality of the Longest Delivery Time algorithm for the static version of this problem, and the Longest Delivery Time among Available Jobs (LDTA) algorithm for the dynamic version of this problem. In addition, we present the result of computational testing of the effectiveness of these algorithms. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

被掩护地面固定目标不受空中打击分析

重点分析了被掩护地面固定目标不受空中打击的相关因素,并定量地分析了敌空袭兵器攻击地面被掩护目标时所需的数量,从而为地面防空建立最佳的防空部署提供依据。因为防空兵群对空袭兵器的射击次数与防空兵群的杀伤区面积成线性关系,所以在探讨如何部署防空兵力时,以防空兵群的杀伤区面积为准则来建立线性规划模型。     

雷达情报特征的Bayes识别方法

根据雷达情报目标判性应用背景,对Bayes方法在该领域的应用进行了研究,初步建立了基于雷达情报特征的统计模型,并在算法的收敛速度和稳健性等方面与D-S证据理论进行了比较。仿真结果表明,Bayes方法对先验信息的精确程度要求并不十分严格,能较好地解决雷达情报综合问题。     

红外导弹制导系统的半实物仿真系统设计

对导弹系统的核心部件——制导系统进行半实物仿真是导弹系统研制中最经济和有效的手段之一。论述了红外制导系统半实物仿真系统的功用,给出了其原理框图,对其中几个关键技术:运动学方程特性的仿真建模、目标背景与对抗特性的生成技术、计算机软件和接口技术、校准设备与故障检测等的实现进行了深入地分析,并介绍了其具体的设计方案。     

基于当前统计模型的有向图切换IMM算法

将当前统计模型和变结构多模型估计算法相结合,提出了一种新的用于跟踪机动目标的交互多模型算法,计算机仿真结果显示该算法能有效提高交互多模型估计器的费效比。     

电磁式时分制头盔显示器瞄准线算法的改进

介绍了电磁式时分制头盔显示器的工作原理 ,给出了瞄准线计算的数学模型 ,分析了存在的问题。最后给出了解决问题的方法和改进后所取得的效果。     

多机空战目标威胁评估算法

首先介绍了几种现有的多机空战目标威胁评估方法 ,并对它们的应用进行了分析 ;在此基础上 ,提出了一种综合目标空战能力和空战态势的威胁评估算法 :威胁指数法 ;最后给出了具体算例 ,计算结果表明 ,威胁指数法可以全面、有效地完成多机空战中威胁评估和威胁排序的计算。     

防空中存在两次转火射击时的火力分配模型

在对空防御时 ,进行火力分配不但要考虑到一次性分配的最佳方案 ,而且应该考虑是否在条件允许的情况下进行一次或两次转火射击 ,如果存在 ,怎样进行转火才能使其射击效果最好。把威胁判断和火力分配结合起来考虑 ,以我方的生存概率为指标 ,建立了存在两次转火射击的火力分配模型 ,并用实例计算检验了模型的正确性。