武警学院研究生教育回顾与发展问题思考

武警学院研究生教育已开办六年,分析六年来研究生教育的基本情况、取得的成绩和存在的问题,对于今后一个时期的研究生教育具有现实指导作用。     

多操纵面战斗机动态控制分配策略研究(英文)

现代先进飞机配置多个操纵面且又冗余,这有利于实现非常规飞行,提高飞机敏捷性,使飞机在机动和故障时有更多的选择,但是同时也导致了飞机控制设计复杂度的增加.为了达到更好的效果,就必须利用控制分配器来充分利用多操纵面的不同带宽.从频率域角度出发,研究了动态控制分配方法,并将其应用于某型先进战斗机的控制分配器设计中,利用鸭翼的频率特性抵消府舱过载,经仿真验证,采用动态控制分配策略时,可以有效地减小座舱过载,同时还可以减小配平阻力,取得了良好的控制效果.     

基于伽利略卫星导航系统的多径误差仿真

着重讨论伽利略卫星导航系统中采用的线性偏移载波调制技术,对GALILEO中可能用到的几种信号的基本特性作具体分析,提出对于BOC信号,应采用余弦副载波调制方式,并在此基础上对GALILEO各种信号的多径误差、平均多径误差进行仿真验证.仿真结果表明,在参数相同的条件下,余弦副载波类型BOC信号的平均多径误差均优于同参数下的正弦副载波类型BOC信号的平均多径误差.     

模拟线性电路的多故障诊断方法

提出了一种基于电路分析理论的模拟线性电路多故障诊断方法,该方法采用电路分析理论中的替代定理,叠加定理来列写电路的故障诊断方程,利用方程组的相容性原理来进行故障定位,通过计算故障支路的电导增量来完成故障定值.仿真实例表明,这种方法可以提高电路诊断的准确性,并为模拟动态电路的故障诊断提供了理论依据.     

线性唯象传热规律下热机内可逆热经济学研究

对符合线性唯象传热规律(q∝Δ(T-1))的热机内可逆热经济学做了进一步研究,导出了在给定条件下Novikov热机的最优利润解析式,并得到了最优利润和相应的效率同其它参数间的关系.     

线性二次型及模型预测控制编队控制研究

多智能体集群作战是未来战场的重要形式.作为集群作战中的关键技术,编队控制有着广泛的应用.以编队控制律为研究目标,选择2种优化控制方法:线性二次型调节器(linear quadratic regulator,LQR)方法和模型预测控制(model predictive control,MPC)方法.针对圆形编队轨迹,采用...     

双泵源电液舵机线谱噪声控制

采取变频调速控制策略的电液舵机可大幅降低操舵噪声,但系统线谱噪声明显且随工况变化而迁移,衰减难度大。基于此,结合泵源双冗余的电液舵机原理,仅改变原系统控制策略,提出基于辅助泵源合流的压力脉动控制措施。理论分析指出,两泵源转速一致,初始相位角为半个周期可衰减奇数次谐波。设计了主从同步控制策略,配置相应硬件,并应用于实际系统,实测相同操舵工况下可降低基脚结构振动总级3~5 dB,一阶线谱最大可衰减23 dB。     

Level workforce planning for multistage transfer lines

In this article, we define two different workforce leveling objectives for serial transfer lines. Each job is to be processed on each transfer station for c time periods (e.g., hours). We assume that the number of workers needed to complete each operation of a job in precisely c periods is given. Jobs transfer forward synchronously after every production cycle (i.e., c periods). We study two leveling objectives: maximin workforce size () and min range (R). Leveling objectives produce schedules where the cumulative number of workers needed in all stations of a transfer line does not experience dramatic changes from one production cycle to the next. For and a two‐station system, we develop a fast polynomial algorithm. The range problem is known to be NP‐complete. For the two‐station system, we develop a very fast optimal algorithm that uses a tight lower bound and an efficient procedure for finding complementary Hamiltonian cycles in bipartite graphs. Via a computational experiment, we demonstrate that range schedules are superior because not only do they limit the workforce fluctuations from one production cycle to the next, but they also do so with a minor increase in the total workforce size. We extend our results to the m‐station system and develop heuristic algorithms. We find that these heuristics work poorly for min range (R), which indicates that special structural properties of the m‐station problem need to be identified before we can develop efficient algorithms. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 577–590, 2016     

不同网栅结构对MEFP成型影响的对比分析

为了研究不同形状网栅结构对形成的MEFP破片的影响,利用LS-DYNA动力有限元程序,采用Lagrangian方法,分别对十字形网栅切割式MEFP战斗部、星形线形网栅切割式MEFP战斗部、中心圆环形网栅切割式MEFP战斗部、井字形网栅切割式MEFP战斗部成型过程进行了数值模拟研究,并对影响各自破片成型及发散角的因素进行了分析研究。通过对不同方案网栅切割式MEFP速度及散布面积对比分析,结果表明:采用井字形网栅产生的破片集聚性优于十字形、星形线形和中心圆环形结构方案。     

Note on “An Optimal Recursive Method for Various Inventory Replenishment Models with Increasing Demand and Shortages” by Teng et al.

In a recent paper, Teng, Chern, and Yang consider four possible inventory replenishment models and determine the optimal replenishment policies for them. They compare these models to identify the best alternative on the basis of minimum total relevant inventory costs. The total cost functions for Model 1 and Model 4 as derived by them are not exact for the comparison. As a result, their conclusion on the least expensive replenishment policy is incorrect. The present article provides the actual total costs for Model 1 and Model 4 to make a correct comparison of the four models. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 602–606, 2000