线性二次型及模型预测控制编队控制研究

多智能体集群作战是未来战场的重要形式.作为集群作战中的关键技术,编队控制有着广泛的应用.以编队控制律为研究目标,选择2种优化控制方法:线性二次型调节器(linear quadratic regulator,LQR)方法和模型预测控制(model predictive control,MPC)方法.针对圆形编队轨迹,采用...     

残差域加权ACF基音周期检测算法

针对传统自相关(ACF)基音周期检测算法存在较多的倍频和半频错误,文章提出一种基于线性预测残差域加权ACF基音周期检测方法。首先对语音信号中心削波,减小共振峰的影响;而后进行线性预测分析获得残差信号,对其求自相关值和循环幅度差(CAMDF)值,以CAMDF的倒数值为权重加权ACF进行基音周期检测;最后通过基音平滑算法对提取的基音轨迹进行后处理。仿真实验表明,该算法可降低基音提取的倍频和半频错误,提高估计精度。     

一个分析与计算曲面结构的有效方法

给出了一种分析计算CAD曲面模型的数值方法。该方法将构成CAD模型的曲面片视作计算单元(面素单元),建立各面素单元的控制方程,再结合CAD曲面模型的流形特征组装各个单元控制方程以求整体解。面素单元的控制方程可根据问题的求解目标分别利用有限元—边界元耦合、有限元—无单元及其他耦合形成。结合线弹性问题的求解,系统地介绍了面素单元法的单元划分与处理、单元控制方程建立等核心环节。还给出了一个分析三倒圆过渡面静载荷变形的实例及其与ANSYS对照的结果。     

Note on “An Optimal Recursive Method for Various Inventory Replenishment Models with Increasing Demand and Shortages” by Teng et al.

In a recent paper, Teng, Chern, and Yang consider four possible inventory replenishment models and determine the optimal replenishment policies for them. They compare these models to identify the best alternative on the basis of minimum total relevant inventory costs. The total cost functions for Model 1 and Model 4 as derived by them are not exact for the comparison. As a result, their conclusion on the least expensive replenishment policy is incorrect. The present article provides the actual total costs for Model 1 and Model 4 to make a correct comparison of the four models. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 602–606, 2000     

A guarantee rate optimization model for wastewater treatment system design under uncertainty

We consider a design problem for wastewater treatment systems that considers uncertainty in pollutant concentration levels at water sources. The goal is to optimize the selection of treatment technologies and pipeline connections, so that treated wastewater can achieve specified effluents discharge limits as well as possible. We propose a new two-stage model to optimize a set of guarantee levels, that is, the maximum concentration level of source pollutants for which treated wastewater can be compliant with discharge limits. In the first stage, treatment technologies and pipeline connections are selected. In the second stage, when pollutant concentration levels are revealed, wastewater distribution and mixing are determined. A key attractiveness of the proposed guarantee rate optimization model is that it can be simplified into a single-stage mixed-integer linear program. In our numerical experiments based on real-world pollutants data, the guarantee rate model demonstrates its advantages in terms of computational efficiency, scalability and solution quality, compared with the standard probability maximization model. Finally, the methodology proposed in this paper can also be applied to other two-stage problems under uncertainty with similar uncertainty characteristics.     

线性唯象传热规律下热机内可逆热经济学研究

对符合线性唯象传热规律(q∝Δ(T-1))的热机内可逆热经济学做了进一步研究,导出了在给定条件下Novikov热机的最优利润解析式,并得到了最优利润和相应的效率同其它参数间的关系.     

结构不确定线性时滞系统的无记忆鲁棒镇定

针对状态和控制均存在时滞的一类结构不确定线性时滞系统 ,讨论了鲁棒镇定问题 ,当不确定性参数满足有界性条件时 ,提出了一种无记忆线性状态反馈控制律 ,可保证闭环系统具有二次稳定性     

Determining optimal sizes of bounded batches with rejection via quadratic min‐cost flow

In this article, we consider a single machine scheduling problem, in which identical jobs are split into batches of bounded sizes. For each batch, it is allowed to produce less jobs than a given upper bound, that is, some jobs in a batch can be rejected, in which case a penalty is paid for each rejected job. The objective function is the sum of several components, including the sum of the completion times, total delivery cost, and total rejection cost. We reduce this problem to a min‐cost flow problem with a convex quadratic function and adapt Tamir's algorithm for its solution. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 217–224, 2017     

瓦楞纸板同步剪切控制系统的设计与研制

介绍了微机控制瓦楞纸板同步剪切控制系统的设计研制。该系统由直流电机调速系统和单片微型计算机控制系统两大部分组成。直流调速系统采用线性二次型最优调节器方法设计,计算机控制系统采用单片微机双ＣＰＵ技术。它是一个大功率高精度机电控制系统,具有响应速度快,剪切精度高,可靠性好,操作方便的特点。     

线性调频脉冲压缩雷达的匹配干扰研究

由于脉冲压缩雷达对目标回波具有很高的压缩比(增益),而对不匹配的干扰信号则压缩比很小.为了提高干扰的有效功率,提出一种与脉压雷达目标信号相仿的线性调频信号作为干扰信号(即匹配干扰),经过理论分析得到了匹配干扰信号在不同的对准频偏情况下,进入雷达的有效干扰功率.通过仿真,结果证实这种匹配干扰可很大程度地提高进入雷达的有效干扰功率,但有效干扰功率会随对准频偏的加大而减小.