科氏流量计信号频率的变步长直接估计算法

研究科氏流量计频率估计方法对提高其测量精度具有重要意义.分析了变步长直接频率估计( VS-DFE)方法的原理,归纳出一种基于VS-DFE的科氏流量计信号频率估计算法,给出了算法基本思想、流程和实现步骤.分别针对两种常见流量状态下科氏流量计的固定频率信号和时变信号进行仿真分析,并与离散频谱校正法进行了比较.仿真结果表明,...     

基于SNR的烟幕干扰效果仿真

烟幕对红外等电磁波具有吸收、反射和散射特性,可导致导引头上接收的能量大大衰减,从而降低导弹的命中概率.针对外场烟幕性能测试受气象条件和环境因素的影响较大,对准确评估抗红外烟幕遮蔽性能存在较大困难的情况,结合气象条件从烟幕透过率的变化引起导引头信噪比变化的角度,建立了烟幕干扰效果的评估模型,通过计算机仿真,得出了烟幕对红外制导导弹的干扰效果.通过试验对其中的一些结论进行了实验验证,结果表明计算结果能够与实验数据较好吻合.     

不同腐蚀状态不锈钢管焊缝区 碱性腐蚀的电位噪声特征

利用电化学电位噪声方法检测了不同腐蚀状态304与316两种不镑钢管焊缝区试样在室温碱液中的腐蚀行为,并采用电化学噪声时域谱、频域谱进行了分析,结果表明:不同腐蚀状态焊缝试样的腐蚀电位及噪声时城谱特征不同,可利用电位噪声频城谱的高频斜率K值定性判定是否发生局部腐蚀,同时可根据频城谱中发生事件特殊频率fn区分材料的腐蚀状态...     

水下目标辐射噪声高精度仿真方法

在对水下高速运动目标实测辐射噪声数据频谱特征充分分析的基础上,基于能量聚点理论建立了一种“平台型λ水平能量聚点”辐射噪声连续谱模型.利用该模型实现了对水下目标辐射噪声的仿真.首先,对离散化的λ取值分别计算其能量聚点频率区间,然后用谐波叠加法生成频带内的时域信号,将所有频带的信号进行叠加就得到辐射噪声的时域信号,与传统的...     

非平稳噪声背景下DOA分步估计方法研究

针对相干和非相干信源同时存在的情况,结合斜投影理论和互相关矢量Toeplitz矩阵重构(CVTR)的方法,提出一种新的信源DOA分步估计方法。该方法把相干信源和非相干信源分开分辨,对相干信源用CVTR方法来恢复为满秩,避免了常规平滑算法阵列孔径损失大、运算量大的缺点;用斜投影算子而非差分方法对信源进行分离,不受相关矩阵须为Toeplitz结构的限制,使得算法可适用于任意阵列结构形式。这种分步分辨思路可有效增强信源过载能力,同时在互相关矢量Toeplitz矩阵重构过程中,可把非平稳噪声协方差矩阵转换成白噪声结构,使得算法对非平稳噪声有较好的适应能力。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

极化域—空域联合谱估计

首次提出极化域-空域联合谱的概念,拓广了电磁波特征参量的谱描述方法.结合具体的极化敏感阵列定义了极化域-空域联合谱,用MUSIC方法得到联合谱函数表达式.研究了联合谱的估计的重要性能指标估计精度和分辨力,估计精度用克拉美劳限CRB(cramer-Rao Bound)来具体度量,分辨力由极化域-空域模糊函数以及模糊图来描述.最后仿真结果验证了该方法的有效性和理论分析的正确性.     

振荡器相位噪声对GNSS接收机载波跟踪数字锁相环性能的影响

关于振荡器相位噪声引起的GNSS接收机载波跟踪数字锁相环相位抖动,目前的解析结论仍是基于模拟锁相环的,不能说明相位抖动大小与中频积累时间的关系,因此不能有效指导高灵敏度、高精度载波跟踪锁相环参数设计.本文首先推导中频积累输出的频率白噪声、频率游走噪声序列的功率谱,然后基于数字二阶锁相环离散线性模型导出了环路相位抖动公式并进行了仿真验证,最后对公式进行了解析和数值分析.分析结果表明:频率白噪声、频率游走噪声引起的二阶载波跟踪锁相环相位抖动,均随中频积累时间单调递增,随环路带宽先递减后递增.本文推得的相位抖动公式及其随参数变化特征的分析结论,可用于具体指导GNSS载波跟踪锁相环参数设计.     

模2n加与模2加相对结合律相容程度的分析

模2n加和模2加是密码算法设计中经常使用的两个编码环节,二者对于结合律的相容程度是指改变二者形成的混合等式中两个变量的运算顺序所造成的误差大小.本文研究了模2n加与模2加相对于结合律的相容程度,给出了在改变[(χ(+)y)+z]mod 2n的运算顺序时,产生的噪声函数ξ(x,y,z)=[(x(+)y)+nz](+)[x(+)(y+nz)]在各点取值的概率分布规律,以及对噪声函数所有取值点的概率值平方求和的计算公式.这些结论在区分攻击中有一定的应用价值.     

线粘弹性材料中三维裂纹问题的加料有限元法

将加料有限元法扩展应用于线粘弹性材料三维断裂问题.为了反映裂纹尖端的奇异性,在裂尖附近的奇异区采用若干八节点六面体加料单元和过渡单元,非奇异区采用常规八节点六面体单元.三种单元分区混合使用形成求解域网格划分.基于Boltzmann叠加原理,推导了粘弹性材料的增量型本构关系,进而获得了增量加料有限元列式,并通过附加自由度计算粘弹性介质中裂纹应变能量释放率.数值算例验证了方法的正确性和有效性.