一种适用于 UWB-SAR 的实时成像算法

UWB-SAR系统较之常规SAR系统,成像所需计算量更为庞大,实时处理的实现更难.通过将子孔径思想应用于BP算法,给出了一种实用的实时成像算法(LocalBP算法),该算法同BP算法相比,成N×N点的图像,运算量可减少,同时该算法具有良好的并行及流水实现结构.     

舰船复合材料局部结构细节设计方法

由于复合材料结构具有各向异性、组份复杂、可设计变量多等特性,有效的复合材料结构设计应同时考虑整体结构宏观设计和局部结构细节设计,两者虽密切关联,但在分析方法上存在一定差异。对此,将整体结构简化分析与局部结构细节设计联系起来,重点针对局部结构细节设计方法进行探讨,提出了一种细节设计方法。该方法基于子模型与试验工况模型的对比分析,通过局部结构试件试验对整体结构承载特性进行了综合评价。以某型船复合材料甲板室结构设计为例,通过整体简化模型优化分析确定板架构件尺度参量和铺层设计方案;提取典型局部结构承载形变特征要求,并基于子模型分析技术探讨局部结构细节设计;最后,以局部结构试验验证与考核完成整体结构的优化设计。计算结果表明:该方法能在有效控制设计成本的同时,合理开展复合材料结构设计工作,可供研究和设计者参考。     

带局部交流函数及自由意志的单领导Cucker-Smale模型的渐近集群分析

为研究集群的形成与否和半径大小之间的关系,主要考虑了具有单个领导的一般等级结构及其领导者速度不变的Cucker-Smale模型。探讨了自由意志对集群产生的影响,通过证明可以给出半径有下界的充分条件(下界和速度差、粒子数、通信强度等有关)。当半径大于下界时,会产生集群。通过MATLAB数值仿真验证了相关结论。     

长杆射弹侵彻三种混凝土靶的实验研究

为了研究钻地武器的侵彻性能,在57mm口径的气炮上发射长杆射弹对三种靶体进行模拟侵彻实验。靶体为水泥砂浆石靶、钢纤维混凝土靶和含单层密排刚玉球的钢纤维混凝土靶。实验结果表明,弹头形状对侵彻深度有明显影响;当长杆射弹和撞击速度都相同时,与侵彻钢纤维混凝土靶相比,含单层密排刚玉球的钢纤维混凝土靶中的侵彻深度大约降低了11%,而水泥砂浆石靶中的侵彻深度增加了12%。     

基于网络技术的火箭发动机试验台控制测量系统设计与实现

介绍了在WINDOWS2000平台下,基于网络技术的多功能火箭发动机试验台控制测量系统设计与实现。给出了系统的硬、软件结构,完成了系统的研制并通过试验验证了该系统。     

面向突防效能的超声速巡航导弹总体设计技术初步研究

防御系统技术的不断发展,对超声速巡航导弹设计提出了新的需求.针对以“性能”为核心的设计不能满足超声速巡航导弹设计新需求的问题,初步探讨了面向突防效能的超声速巡航导弹总体设计技术.分析了国内外导弹武器设计技术的发展,指出设计技术向着以“效能为核心”的设计方向发展;提出了面向效能的设计理念,分析指出面向效能的设计是以追求满意设计为目标的优化设计;在新的设计理念指导下提出了面向突防效能设计的技术框架,主要说明了面向突防效能的超声速巡航导弹设计框架、效能基础、技术基础、基本模式以及几项关键技术等.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.     

不同截面形状复合长杆弹对陶瓷复合靶板侵彻研究

采用数值模拟技术研究了由3种不同截面形状的钨芯外包覆一层钢,形成的钢包覆层复合长杆弹在入射速度为1200m/s～1700m/s时对陶瓷/金属复合靶板的侵彻过程。结果表明:对于同一入射速度、相同弹体长度、同种材料的弹芯和包覆层以及靶板材料而言,等面积的六边形截面钨芯复合长杆弹的侵彻深度明显大于圆形及方形截面,方形及六边形截面与和它们等外接圆形成的圆形截面复合长杆弹侵彻深度没有明显差别,本研究认为这是与不同截面钨芯的外接圆直径直接相关。六边形截面长杆弹侵彻过程中的自锐化现象是其侵彻深度明显大于其它两种弹体的主要原因。     

对机动突防反舰导弹的防御

建立了舰空导弹反导拦截模型和反舰导弹“蛇行机动”突防弹道模型,通过攻防对抗仿真的方法研究了舰空导弹对末端机动突防反舰导弹的防御问题,提出了对舰空导弹未来发展的建议.     

Reclaiming the local in EU peacebuilding: Effectiveness,ownership, and resistance

ABSTRACT

Since the early 2000s, the “local turn” has thoroughly transformed the field of peacebuilding. The European Union (EU) policy discourse on peacebuilding has also aligned with this trend, with an increasing number of EU policy statements insisting on the importance of “the local.” However, most studies on EU peacebuilding still adopt a top-down approach and focus on institutions, capabilities, and decision-making at the EU level. This special issue contributes to the literature by focusing on bottom-up and local dynamics of EU peacebuilding. After outlining the rationale and the scope of the special issue, this article discusses the local turn in international peacebuilding and identifies several interrelated concepts relevant to theorizing the role of the local, specifically those of effectiveness, ownership, and resistance. In the conclusion, we summarize the key contributions of this special issue and suggest some avenues for further research.