长码直扩信号的符号速率盲估计方法

针对长码直接序列扩频(DSSS)信号的符号速率估计的难题,提出了基于相关处理的方法。该方法首先估计长码直扩信号的相关函数二阶矩,然后将相关函数二阶矩的估计作为输入信号进行预处理,以去除扩频码周期处的峰值。对预处理后的信号再次进行自相关处理,则所得的信号的频谱中含有符号速率谱线。理论分析和计算机仿真证明了所提出的算法的有效性。     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

Investigation on energy output structure of explosives near-ground explosion

In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions, the free-field shockwave, ground reflection shockwave and Mach wave overpressure time history of composition B explosive, RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors. The shape of the free-field shock wave, ground reflection shock wave, and Mach wave and explosion flame were captured by high-speed camera. The experimental results show that, at the same horizontal distance from the initiation point, the peak overpressure of explosive shock wave of composition B explosive, both in the air and on the ground, is less than that of RDX and aluminized explosives. At a distance of 3.0 m from the initiation point, the peak overpressure of aluminized explosives is slightly less than that of RDX explosives. Owing to the exothermic effect of aluminum powder, the pressure drop of aluminized explosives is slower than that of RDX explosives. At 5.0 m from the initiation point, the peak overpressure of aluminized explosives is larger than that of RDX explosives. At the same position from the initiation point, among the three kinds of explosives, the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum. With the increase of the horizontal distance from the initiation point, the height of Mach triple-points (Mach steam) of the three explosives increases gradually. At the same horizontal distance from the initiation point, there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive, and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives. The maximum diameter and duration of the fireball formed by aluminized explosives are the largest, followed by composition B explosive, and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.     

Ka波段VCO控制信号发生器设计及调制域测试方法

采用DSP的SPORT端口控制16位高速串行DAC,设计了任意电压信号发生器,用于控制Ka波段连续波雷达压控振荡器产生频率可任意调制的发射信号。利用该信号发生器与调制域分析仪,测试了压控振荡器的调制特性和阶跃响应。     

基于相关算法超声流量计的研究

为解决开采原油的精确在线计量问题,在对超声波相关流量计原理分析的基础上,重点研究了超声波相关流量算法。采用循环相关算法,有效克服了有限长离散数据线性相关算法所出现的计算失效问题,并以DSP芯片为核心,实现了超声波相关流量测量系统的设计,完成了信息不丢失测量以及对困难流体流量的非接触在线计量。实验方案经油田现场测试,计量误差可以控制在2%以内。     

水下近距爆炸作用下弹性钢板处的空化特性研究

弹性钢板在水下近距爆炸作用下,冲击波会使其附近流体形成局部空化,脉动气泡会使流体形成锥形空化。利用平面冲击波理论对局部空化的形成特性进行了研究,理论分析了结构目标尺度的变化对空化区域形成的影响,并通过具体试验对局部空化理论进行了验证,两者符合较好;通过试验和数值仿真方法研究了气泡脉动引起的锥形空化的形成特点,初步分析了锥形空化的形成原因。结果表明,锥形空化对结构具有较大的冲击作用。     

等幅分米波对无线电引信的辐照效应研究

分析了无线电引信电磁环境效应研究的重要性,给出了研究所需的实验设备和实验方法,选择某型集成电路分米波无线电近炸引信,从勤务处理状态和工作状态两个方面,研究了无线电引信的等幅分米波辐照效应,确定了被试无线电引信的等幅分米波辐照干扰阈值以及干扰阈值随辐照频率的变化规律,分析了等幅分米波对无线电引信的能量耦合途径。     

非平衡机制下激光与等离子体相互作用机理

采用三温度热化学非平衡模型,考虑了激光能量在空气等离子体中的共振吸收和逆韧致吸收机制,用有限差分NND格式对控制方程组进行数值离散.对等离子体点火过程进行耦合计算,并研究了不同入射激光强度条件下等离子体吸收波的形成和演化机制,讨论了粘性扩散效应对等离子体吸收波的影响.结果表明,在初始温度300K,大气压力条件下,生成ZND模式的LSD波所需最小激光强度为5.0×106 W/cm2.     

长向量处理器高效RNN推理方法

模型深度的不断增加和处理序列长度的不一致对循环神经网络在不同处理器上的性能优化提出巨大挑战。针对自主研制的长向量处理器FT-M7032,实现了一个高效的循环神经网络加速引擎。该引擎采用行优先矩阵向量乘算法和数据感知的多核并行方式,提高矩阵向量乘的计算效率;采用两级内核融合优化方法降低临时数据传输的开销;采用手写汇编优化多种算子,进一步挖掘长向量处理器的性能潜力。实验表明,长向量处理器循环神经网络推理引擎可获得较高性能,相较于多核ARM CPU以及Intel Golden CPU,类循环神经网络模型长短记忆网络可获得最高62.68倍和3.12倍的性能加速。     

长杆射弹侵彻三种混凝土靶的实验研究

为了研究钻地武器的侵彻性能,在57mm口径的气炮上发射长杆射弹对三种靶体进行模拟侵彻实验。靶体为水泥砂浆石靶、钢纤维混凝土靶和含单层密排刚玉球的钢纤维混凝土靶。实验结果表明,弹头形状对侵彻深度有明显影响;当长杆射弹和撞击速度都相同时,与侵彻钢纤维混凝土靶相比,含单层密排刚玉球的钢纤维混凝土靶中的侵彻深度大约降低了11%,而水泥砂浆石靶中的侵彻深度增加了12%。