气液比对液体中心式气液同轴离心喷嘴燃烧过程的影响

为了分析气液比对液体中心式气液同轴离心喷嘴燃烧过程的影响,针对一台采用液体中心式气液同轴离心喷嘴的燃气发生器在不同气液比下进行热试,并对试验结果进行深入分析。结果表明:随着气液比的增加,燃烧过程存在三种状态——稳定燃烧、稳定燃烧过渡到低频不稳定燃烧、低频不稳定燃烧。这种低频不稳定燃烧与供应系统的振荡无关,是由气液比增加造成三岔火焰远离喷注面板,当三岔火焰到达喷雾撞击点后火焰稳定性降低,使得火焰在回流区内前后振荡引起的。     

Analysis of down times of jib cranes—A stochastic approach

In this paper a case study dealing with the maintenance problem of jib cranes is presented. A jib crane is viewed as a complex system whose performance is observed as a single realization over period of time. After pointing out limitations of existing stochastic models to analyze the observed realization a new family of bivariate stochastic processes is introduced. The data of jib crane is analyzed using new model and cross‐validated using part of the data set. It is noted that the new family of stochastic processes is useful to analyze bivariate data where one of the variables is finitely valued and the other is nonnegative and continuous. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 231–243, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10006     

并联TBCC动力对高超声速飞行器性能的影响

针对马赫数为6的一级高超声速巡航飞行器的动力需求,提出涡轮/亚燃冲压/双模态超燃冲压组合动力（T/RJ/DMSJ）和射流预冷涡轮/亚燃冲压/双模态超燃冲压组合动力(PCT/RJ/DMSJ)两种方案。在给定的飞行任务下,分析起飞推重比分别为0.8和1.0时,飞行器完成任务时的航程和飞行时间,并对比了PCT/RJ/DMSJ在两种工作模态下的性能。研究结果表明：在相同的起飞推重比下,两种组合动力方案的航程和飞行时间相差不大。当起飞推重比为0.8时,采用PCT/RJ/DMSJ组合动力方案比T/RJ/DMSJ组合动力方案的航程高出3.6%,飞行时间高出3.8%;当起飞推重比为1.0时,PCT/RJ/DMSJ的航程和飞行时间比T/RJ/DMSJ的分别高出4.6%和4.8%。在小推重比下,跨声速段的燃料消耗和飞行时间占整个加速爬升段的比例较大,随着推重比的增加,这个比例减小,巡航可用的燃料比例增大,巡航距离增加,提高起飞推重比可以提高超声速飞行器的航程并缩短飞行时间。     

针对窄脉冲雷达测角的相位干涉仪仿真研究

以Matlab／simulink为工具,对相位干涉仪快速准确获取窄脉冲目标雷达的角信息问题进行了仿真研究。研究表明,相位干涉仪快速、准确获取窄脉冲目标雷达角信息的基本能力主要取决于鉴相器中低通滤波器截止频率的设计,并给出了截止频率的设计公式。此外,还对读取相关信息的时机和方法等问题进行了研究,给出了相应的解决方案。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

离子束加工误差对散射损失的影响研究

离子束加工(Ion Beam Figuring,IBF)去除函数对加工残差具有重要的影响,而加工残差引起的表面散射则导致光学性能发生变化.为了减小加工残差对光学性能的影响,利用基于CCOS成形原理的离子束加工仿真程序对光学镜面进行修形,分析不同去除函数宽度对散射损失(Ratio of Scattering Loss,RSL)指标的影响.通过研究可知,随着去除函数宽度的减小,加工残差对散射损失的影响越来越小.因此,根据加工残差对RSL指标的影响程度以及RSL指标要求,可以合理选择去除函数宽度,从而在满足面形精度的同时,优化加工工艺.     

ADTA-1：一种嵌入式异构双核微处理器

针对多核日益严重的功耗问题,利用异步技术在低功耗方面的优势,结合数据触发结构设计并实现了一种嵌入式异构双核微处理器(ADTA-1).该设计将异步设计应用于嵌入式多核微处理器中,并在芯片中对异步微处理器进行了测试,验证了异步电路在多核微处理器中的有效性和低功耗特性,为进一步设计和实现低功耗异步多核微处理器进行了有益的探索.     

滑翔增程弹滑翔弹道优化设计分析

针对鸭式布局的滑翔增程弹,建立了滑翔增程弹滑翔弹道的模型,采用使滑翔弹道上每一点的升阻比最大的设计思想进行弹道优化设计,导出了俯仰舵偏角与平衡攻角的表达式,并对滑翔飞行弹道特性进行了仿真计算分析.仿真计算表明,滑翔弹道与常规弹道降弧段相比下降趋缓,增程效果显著.     

斜入射条件下F-P干涉腔透过率特性分析

分析了斜入射角条件下F-P干涉腔的透过率特性;结合单层介质膜和单层金属膜的反射特性随入射角的变化规律,得出了反射特性参数为恒定值时微腔、低反F-P干涉腔透过率的计算误差;仿真结果表明,在光束斜入射条件下,特别是在大入射角下,单层介质膜的反射率指数增大,单层金属膜的反射率和反射相移也指数增大,但其吸收系数指数减小,造成微腔、低反F-P干涉腔透过率曲线与反射特性参数为恒定值时相比均明显向下偏移,且偏移量逐渐增大。     

一种基于层次位线缓冲的异步片上路由器

片上缓存资源是片上路由器的重要组成部分,其结构好坏直接关系到片上互联网络的实现复杂度、整体性能及功耗开销。鉴于异步电路的握手工作方式,异步路由器一般采用基于移位寄存器的异步FIFO(First In First Out)实现片上缓冲,这种结构导致了报文传输延迟及数据翻转次数增加。提出一种基于层次位线缓冲的异步FIFO结构,设计实现了一种新的异步路由器结构。相对于传统异步路由器,新的异步路由器能够有效降低路由器设计的硬件复杂度,减少数据的冗余翻转,降低功耗。实验结果表明在相同配置的情况下,新异步路由器面积降低了39.3%;当异步FIFO深度为8的时候,新异步路由器能够获得41.1%的功耗降低。