模型三组元喷嘴雾化SMD变化规律

为了充分研究新型三组元喷嘴的内混腔雾化特性 ,设计了模型喷嘴进行多工况试验。试验发现 ,维持气体或液体压降不变 ,改变另一种介质的压降 ,会得到不同的雾化平均直径随气体压降或液体压降 ,以及气液比ALR的变化曲线 ,这些曲线有着明显的规律。大量试验表明 ,虽然平均直径SMD随气体压降或液体压降的变化曲线明显不同 ,但其随气液比的变化规律却趋于相同     

汇编语言动态分析工具中的程序插装技术

根据8086/8088语言的结构化特点,提出了程序插装的概念及其实现方法,并基于插装研制出一种动态分析工具,从而实现了对程序分支及语句的自动测试功能.     

小型侦察无人机任务能力及拒止距离分析

随着无人机技术的快速发展,无人机已在民用、军事领域得到广泛应用.尤其是具有"低慢小"特征的小型无人机,使用方便灵活,成本相对低廉,可用于执行侦察监视、自杀袭击等任务,对日常防空安全、重要目标防护构成严重威胁.分析研究了小型无人机主要威胁样式,重点分析了小型侦察无人机载荷任务能力,提出对该类目标拒止距离需求,可为相关拦截...     

三种实时误差配准算法性能分析与比较

对雷达组网中现有的三种实时误差配准算法即扩维扩展卡尔曼滤波算法(Augmented State Extended Kalman Filter)、解耦卡尔曼滤波算法(decoupled Kalman Filter)和准确算法(Exact method)进行了介绍与分析,并通过蒙特卡罗仿真试验从算法估计的均方根误差、估计的...     

浅析炮车比

本文以坦克发射时车体的角振幅和乘员所受加速度不超过一定值为基础,推导了炮车比极限值的理论公式;并对影响炮车比极值的因素进行了分析,最后,以59式坦克为例得出炮车比不超过1.71,该结论具有普遍意义.     

关于潜艇装备劳兰C导航仪技术问题的研究

本文提出了一种改善潜艇现有天线接收性能的方法,从而解决了在潜艇上安装使用劳兰C导航仪的关键技术问题。     

溶胶—凝胶法制备SiO2气凝胶薄膜溶胶粘度的研究

用低介电常数介质薄膜代替传统的SiO2薄膜是减小ULSI中互连延迟、串扰和能耗的有效方法.SiO2气凝胶薄膜因具有低介电常数、低密度、高热稳定性等性能而成为ULSI中金属间介质的理想材料.以正硅酸乙酯为原料,采用酸/碱两步溶胶-凝胶法结合匀胶和超临界干燥等工艺在硅片上成功制备了SiO2气凝胶薄膜.研究了不同配比的SiO2溶胶粘度随时间的变化;确定了适于匀胶的溶胶的粘度范围为9～15mPa*s;发现溶胶粘度在9～15mPa*s的时间随溶剂异丙醇(IPA)用量的增加和NH4OH的减少而延长.     

精确制导弹药低成本制导控制系统设计

针对精确制导弹药制导控制系统低成本的迫切需求,提出了一种弹载低成本制导控制系统设计方法。建立了一种弹载制导控制系统低成本体系架构,从功能、硬件、软件等方面对其进行了GNC一体化设计,并在此基础上提出了一种基于ARM处理器的一体化制导计算机设计方法。针对MEMS导航系统精度低、噪声大特点,设计了一种惯性/卫星数字制导方案。该低成本制导控制系统设计方法可有效减少系统冗余硬件,降低成本,实现较高的制导控制精度,满足未来低成本精确制导武器的需求。     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.