Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

一种鱼雷自导信号频率检测方法研究

靶场在进行智能鱼雷鉴定试验任务时,实时准确地检测出鱼雷自导信号的频率成分是靶标信号处理中的重要环节,谱线比值法便是靶标进行信号处理时检测信号频率的一种有效方法。本文介绍了谱线比值法的基本原理,针对目前鱼雷自导信号特点,对该方法提出了改进方案并进行了仿真。仿真结果表明,经改进的谱线比值法能够满足靶标检测复杂鱼雷自导信号体制下信号频率的使用要求。     

THO-MAC:一种两跳优化的低延迟低功耗无线传感器网络介质访问控制协议

功耗与延迟是无线传感器网络介质访问控制协议设计首要考虑的两个问题。提出了一种新的传感器网络低延迟、低功耗、接收节点初始化异步介质访问控制协议——THO-MAC协议。通过准确预测接收节点的唤醒时间,THO-MAC协议调度发送节点侦听信道,从而减少发送节点空闲侦听能量浪费。THOMAC协议在发送节点两跳转发节点集中选择使报文两跳转发延迟最小的转发节点,从而降低报文传输延迟。使用NS2模拟器对THO-MAC协议进行了详细模拟。模拟结果显示,与RI-MAC和Any-MAC协议相比,THOMAC协议可以减少35.5%和18%的报文传输延迟,同时节省23.5%和15.5%的节点功耗。     

数值模拟气/气喷嘴速度比对燃烧性能的影响

为研究应用于全流量补燃循环发动机的不同气/气喷嘴得到的燃烧流场,通过求解NavierStokes方程组,对不同燃料与氧化剂速度比下的流动燃烧过程进行了数值计算,计算结果与实验结果吻合。仿真结果表明:增加速度比能使燃烧火焰面提前,燃烧效率变大。如果发动机的长度受到限制,可以适当增加速度比以实现高效燃烧。     

绳系拖曳离轨过程中的摆动抑制策略

以周向常值连续小推力作用下的绳系拖曳离轨为背景,针对离轨过程中的系绳摆动抑制问题,建立了系统质心轨道动力学方程及系绳摆动动力学方程,分析了无系绳收放控制时的系绳摆动特性以及系绳收放对系绳摆动的作用效果,构造了使系绳摆动衰减的期望绳长收放速率并设计了系绳张力控制律。仿真结果表明:无系绳收放控制时,系绳摆动表现为平衡位置附近的周期性往复运动;张力控制连续平滑,很好地实现了系绳实际长度对期望长度的跟踪,同时有效地抑制了离轨过程中的系绳摆动。     

GPS L1C信号LDPC译码器设计

GPS现代化中的L1C信号使用了LDPC码,以提高接收机的弱信号接收能力。L1C信号中使用的LDPC码没有循环或准循环结构,这为译码器设计带来了难度。为了降低译码器实现复杂度,在分析L1C信号LDPC码校验矩阵结构的基础上,通过对校验节点分类和改变变量节点更新方法,提出了一种低存储量和简化译码器控制逻辑的低复杂度译码器结构,并通过仿真验证了译码器译码结果的正确性。     

阶比谱分析与汽车起动电机故障的实时诊断

本文主要论述阶比谱分析方法及其在汽车起动电机故障实时诊断中的应用。首先阐述了阶比谱分析的原理以及阶比采样中混迭与泄漏的产生及其抑制方法,然后讨论了如何在起动电机运行过程短、升速快的情况下获取感兴趣的噪声信号,进而采用阶比谱分析方法从信号中提取故障特征信息,最后利用阀值判别法起动电机的故障进行实时诊断。     

基于北斗短报文的远海实时精密单点定位

针对远海精密导航与定位费用高昂的问题,提出利用北斗短报文传输多模全球导航卫星系统的实时服务数据,实现远海实时精密单点定位。为了降低通信成本和硬件成本,本研究对实时服务数据进行简化,弥补了北斗短报文带宽的不足;为了克服北斗短报文频率低的缺点,采取了实时精密星历预报的方法,来获取分钟间隔以外时刻的卫星轨道位置和钟差改正。对基于北斗短报文的远海实时精密单点定位的数据处理过程进行了仿真模拟。后期处理实测海洋观测数据,对定位性能进行测试,可实现水平方向厘米级定位,竖直方向精度为10~20 cm。该方法为低成本的远海实时定位提供了技术参考。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.