悬臂式围护桩受力性状与内力传递特征试验

为研究悬臂式围护桩结构的内力、弯矩、位移和嵌固段的变化规律及特点,结合西宁火车站综合改造工程,对该深基坑支护结构在不同开挖工况条件下悬臂桩的受力性状与内力传递特征进行现场动态测试试验。试验结果表明:悬臂桩的受力特征与理论值有所差异,在实际设计中可对其在配筋方式、混凝土强度设计、嵌固段长度等方面进行优化。试验结果可以有效优化桩身设计,为复杂基坑在开挖过程中的支护结构受力及变形提供参考性依据。     

Effect of welding processes and consumables on fatigue crack growth behaviour of armour grade quenched and tempered steel joints

Quenched and Tempered (Q&T) steels are widely used in the construction of military vehicles due to its high strength to weight ratio and high hardness. These steels are prone to hydrogen induced cracking (HIC) in the heat affected zone (HAZ) after welding. The use of austenitic stainless steel (ASS) consumables to weld the above steel was the only available remedy because of higher solubility for hydrogen in austenitic phase. The use of stainless steel consumables for a non-stainless steel base metal is not economical. Hence, alternate consumables for welding Q&T steels and their vulnerability to HIC need to be explored. Recent studies proved that low hydrogen ferritic steel (LHF) consumables can be used to weld Q&T steels, which can give very low hydrogen levels in the weld deposits. The use of ASS and LHF consumables will lead to distinct microstructures in their respective welds. This microstructural heterogeneity will have a drastic influence in the fatigue crack growth resistance of armour grade Q&T steel welds. Hence, in this investigation an attempt has been made to study the influence of welding consumables and welding processes on fatigue crack growth behaviour of armour grade Q&T Steel joints. Shielded metal arc welding (SMAW) and Flux cored arc welding (FCAW) were used for fabrication of joints using ASS and LHF consumables. The joints fabricated by SMAW process using LHF consumable exhibited superior fatigue crack growth resistance than all other joints.     

火灾模拟软件FDS场景建模环境的设计

火灾模拟软件FDS是基于控制台的应用程序,场景建模文件需要用文本编辑工具编辑,模拟计算中要回到DOS环境中使用命令形式来调用。为了更加便捷地使用FDS软件,在VC++平台下设计出了Windows下的FDS场景建模环境,设计采用图形用户界面方式。系统结构主要由客户端界面和FDS后台引擎服务端构成,系统通过建立一个线程来开启FDS运算引擎,采用匿名管道技术来重定向FDS的运算步骤信息到用户界面中,使用该系统可以大大提高火灾模拟的效率。     

复合材料帽形加筋梁强度及刚度实用计算与试验

利用变形协调方程,推导了复合材料帽形加筋梁的等效弯曲刚度公式,建立了复合材料帽形加筋梁的应力、挠度计算公式.计算了均布荷载作用下,不同边界条件下复合材料帽形加筋梁的应力和挠度,并进行了帽形加筋梁的三点弯曲强度试验.对比分析了数值计算结果和试验结果,结果表明:理论计算结果和试验结果吻合较好,说明该方法以及推导的计算公式是可靠的,易于在复合材料船体初步设计阶段中使用.     

基于准循环双对角阵的LDPC码编码算法

针对校验矩阵形如准循环双对角阵的结构化LDPC码,对比研究了两类高效的编码算法:矩阵分解编码算法和分项累加递归编码算法,证明了两类算法从实现角度是等价的,但分项累加递归编码算法推导更为直观,且便于硬件并行实现。基于分项累加编码算法,提出了一种适合准循环双对角LDPC码的部分并行编码结构,设计实现了IEEE 802.11n标准中的LDPC码编码器。FPGA实现结果表明,所设计的LDPC编码器具有硬件开销较小、吞吐率高的优点,在码长为1944bit、码率为5/6时信息比特吞吐率最高可达13Gbps。     

Ungoverned space? Examining the FARC's interactions with local populations in Northern Ecuador

The Ecuadorian state has long been absent from the regions along its northern border with Colombia. I argue that this lack of state presence has allowed non-state armed groups and criminal organizations space to not only operate from these areas, but also, to challenge and change the relationship between local populations and the Ecuadorian state. After reviewing theoretical approaches to concepts of changing security paradigms and ungoverned space, the article details the conditions that have allowed armed groups, specifically the FARC, to take advantage of the lack of state presence along Ecuador's northern border.     

Initiating insurgencies abroad: French plans to ‘chouannise’ Britain and Ireland, 1793–1798

Secret French plans to launch guerrilla-style raids on the British Isles devised in the spring of 1796 were referred to as ‘chouanneries’. The name and concept behind these small-war operations were modelled on the irregular tactics used by the Chouan rebels in the Vendée, which the French state army had brutally quashed, but some wished to transfer into their institutional practice. Part of France's ongoing military strategy in the war against Britain, which included fomenting insurrection in Ireland, these irregular operations were to be manned partially by pardoned deserters and released convicts and prisoners of war. Of these, only Tate's brief invasion of Wales in 1797 was realised, but the surviving plans provide insightful historical lessons into an Anglophobic mindset shared by a small network of practitioners and policy deciders on the effectiveness of such shock and awe tactics. Largely motivated by the desire to take revenge for Britain's support of counter-revolutionaries in the Vendée, these plans could more aptly be referred to as counter-‘chouanneries’.     

非相干背景光辐照二波耦合中的最佳匹配随机共振

针对非相干背景光辐照二波耦合中参数的最佳匹配设计问题,提出了一种基于随机共振理论的研究方法。首先,文章通过二波耦合过程进行物理机理分析和数值实验分析,证明了该问题在本质上可归结为一种随机共振现象。其次,从随机共振的角度,研究其中的最佳参数设计问题,给出了一种分布处理的最优参数设计流程。按照该方法,在给定增益要求的情况下,先根据信号光饱和与否来确定晶体长度,最后根据非相干光的比例对增益的影响来确定非相干光的比例。仿真实验表明,经过最佳参数设计后,信号的增益和输出信噪比上均有显著提高。     

Assessing the value of demand sharing in supply chains

We consider the problem of assessing the value of demand sharing in a multistage supply chain in which the retailer observes stationary autoregressive moving average demand with Gaussian white noise (shocks). Similar to previous research, we assume each supply chain player constructs its best linear forecast of the leadtime demand and uses it to determine the order quantity via a periodic review myopic order‐up‐to policy. We demonstrate how a typical supply chain player can determine the extent of its available information in the presence of demand sharing by studying the properties of the moving average polynomials of adjacent supply chain players. The retailer's demand is driven by the random shocks appearing in the autoregressive moving average representation for its demand. Under the assumptions we will make in this article, to the retailer, knowing the shock information is equivalent to knowing the demand process (assuming that the model parameters are also known). Thus (in the event of sharing) the retailer's demand sequence and shock sequence would contain the same information to the retailer's supplier. We will show that, once we consider the dynamics of demand propagation further up the chain, it may be that a player's demand and shock sequences will contain different levels of information for an upstream player. Hence, we study how a player can determine its available information under demand sharing, and use this information to forecast leadtime demand. We characterize the value of demand sharing for a typical supply chain player. Furthermore, we show conditions under which (i) it is equivalent to no sharing, (ii) it is equivalent to full information shock sharing, and (iii) it is intermediate in value to the two previously described arrangements. Although it follows from existing literature that demand sharing is equivalent to full information shock sharing between a retailer and supplier, we demonstrate and characterize when this result does not generalize to upstream supply chain players. We then show that demand propagates through a supply chain where any player may share nothing, its demand, or its full information shocks (FIS) with an adjacent upstream player as quasi‐ARMA in—quasi‐ARMA out. We also provide a convenient form for the propagation of demand in a supply chain that will lend itself to future research applications. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 515–531, 2014     

Poachers turned gamekeepers: A study of the guerrilla phenomenon in Spain, 1808–1840

This article modifies the associations made by historians and political scientists of Spanish guerrilla warfare with revolutionary insurgency. First, it explains how the guerrilla phenomenon moved from a Leftist to a reactionary symbol. Second, it compares the insurgency and counter-insurgency features of the Carlist War (1833–1840) with those of the better-known Peninsular War (1808–1814). Third, it shows how erstwhile guerrilla leaders during the Carlist War made their expertise available to the counter-insurgency, in a socio-economic as well as military setting. This article revises the social banditry paradigm in nineteenth-century Spain in the under-researched context of Europe bloodiest nineteenth-century civil war.