供电电缆磁场辐射的预测模型及优化设计

基于磁场叠加原理,建立了单相、三相、并联单相、并联三相供电电缆常见布局方式下的磁场辐射计算模型,并给出了降低电缆磁场辐射的优化布局方法。仿真与实验结果表明:该计算模型有较高的准确性,有助于把握供电电缆磁场辐射的决定因素,可用于快速指导供电电缆的优化设计,以避免反复的仿真或实验试探,缩短设计时间,降低设计成本。     

双壳体潜艇磁场变化的实验研究与特性分析

双壳体潜艇的磁化特征与单壳体潜艇有较大区别,为了将其磁化特性分析清楚,建立了双层圆柱形铁壳桶的简易潜艇模型,并将其放置于地球磁场环境中,利用通电线圈产生的强大磁场对潜艇模型进行局部磁化;然后,以潜艇垂向磁场变化量作为分析对象,并结合舰船磁场规律、磁滞特性、退磁场等理论,对双壳体潜艇的磁场变化规律进行了定性分析。研究结果表明:双壳体潜艇的外壳磁化规律近似于单壳体潜艇,而由于外壳屏蔽地球磁场,内壳几乎只受到线圈磁化影响。该结论可以为舰船消磁作业等提供理论依据。     

基于建构文化的我军第一代营房建筑解读

从建构文化的发展历程与内涵入手,透过建构的视角审视我军第一代营房,对其在材料与技术的选择、建构表现以及建造者与建筑的关系等方面进行了分析,发现第一代营房在建设经费短缺的条件下重视建筑材料、建筑结构、构造技术等建筑本体内容,展现出建筑的朴素真实之美,并在无形中蕴含了建构的精神。这不仅反映出我军一些优良的营房建设传统,也反衬出当下营房建设的一些不良倾向。希望借助建构这一有力工具,在完成对第一代营房重新审视的同时从中获得启示,对今日方兴未艾的我军现代营房建设提供有益借鉴。     

电磁发射装置电-磁-热场分布的分析与仿真

为探讨电磁发射过程中出现的热烧蚀现象,构建了电磁发射及电接触层接触电阻的模型,推导出电-磁-热场耦合方程,采用有限元数值计算方法得到了在脉冲电流激励下,轨道和电枢间电流密度、磁感应强度及温度的分布图。计算过程表明:电磁发射过程实际是电-磁-热场的耦合过程,接触电阻是造成电磁发射热损耗的主要原因之一,接触电阻使得轨道和电枢接触表面区域的电流密度极大,容易造成轨道材料的烧蚀。     

电化学极化状态对潜艇螺旋桨扰动电场模型的影响

潜艇服役期间涂层性能退变影响潜艇电场分布,以材料电化学极化状态为边界条件,应用边界元法建立潜艇涂层性能下降、涂层渗透腐蚀、涂层局部破损极化三种潜艇腐蚀静电场模型,从时域和频域特征对螺旋桨扰动电场模型进行分析。研究结果表明：电化学极化状态对螺旋桨扰动电场的电位信号特征及电场谐波频段影响显著。恒电位、线性极化、非线性极化三种边界条件下,螺旋桨以相同频率旋转扰动静电场时,各模型的频率成分占比差异明显。非线性边界条件下的扰动频率和2倍扰动频占比相差最大,线性边界条件下的扰动频率和2倍扰动频占比相差最小。三种边界条件下电场模型的3倍扰动频以上的谐波范围会发生改变,恒电位边界下模型谐波范围最小,非线性边界条件下谐波范围最大。     

低空复杂场景红外弱小目标快速精准检测

针对低空复杂场景下红外弱小动目标检测难度大、虚警率高等问题,面向探测系统中高帧频图像实时处理应用需求,提出基于全卷积网络的弱小目标精准检测方法和基于现场可编程逻辑门阵列(field programmable gate array, FPGA)的低时延并行处理方法。采用轻量化全卷积网络对红外图像中弱小目标进行空域检测,对相邻图像帧疑似目标进行时域轨迹关联以进一步降低虚警率。实验结果表明:上述方法相比于五种传统方法在检测率和虚警率性能方面均有显著提升,并在单片FPGA上完成100 Hz图像实时处理,处理时延低于1.8 ms,实现低空复杂场景弱小目标高精度高鲁棒快速实时检测。     

基于等效电路和点电流源的潜艇水下腐蚀电场估算

为了对潜艇涂层破损状态的水下腐蚀电场进行快速评估,基于电化学腐蚀原理和潜艇结构特点,建立潜艇涂层局部破损时的腐蚀电流等效电路,对潜艇涂层局部破损时的腐蚀电流强度进行估算,并基于点电流源对潜艇腐蚀电场建模,将潜艇涂层破损部位和裸露螺旋桨等效为点电流源,利用点电流源在分层介质中的电场计算公式对潜艇涂层破损时的腐蚀稳恒电场进行估算。与某型潜艇腐蚀电场商业有限元软件COMSOL仿真结果对比表明：该估算方法得到的潜艇表面腐蚀电流和不同路径电场分布曲线规律与COMSOL仿真结果基本一致,电流估算值相对误差不超过6.5%,电场各分量峰峰值相对误差不超过18%。     

强磁场环境模拟系统线圈支架设计及力学仿真

强电磁冲击环境的核心执行机构是线圈,除保障强磁环境发生线圈的电磁特性外,还须确保线圈支架具有充足的机械特性。在完成对线圈磁电设计的基础上,根据线圈的三维结构图、材料配置、质量分布、各零部件之间连接方式以及线圈固定方式等,建立线圈支架结构整体系统有限元计算模型,对线圈支架系统进行静力、稳定性数值计算分析,并校核联接件强度,为线圈支架结构提供参考依据。对实用大型强磁冲击系统所用线圈整体的力学结构进行设计分析,应用背景较新,且仿真计算过程严格按照实际搭建尺寸进行,具有高度的一致性,为后续搭建强磁环境发生装置提供坚实基础。     

Cell-type continuous electromagnetic radiation system generating millimeter waves for active denial system applications

The cell-type continuous electromagnetic radiation system is a demonstration device capable of generating high-power millimeter electromagnetic waves of a specific wavelength and observing their effects on living organisms. It irradiates a biological sample placed in a 30 × 30 × 50 cm³ cell with electromagnetic waves in the 3.15-mm-wavelength region (with an output of ≥1 W) and analyzes the temperature change of the sample. A vacuum electronic device-based coupled-cavity backward-wave oscillator converts the electron energy of the electron beam into radiofrequency (RF) energy and radiates it to the target through an antenna, increasing the temperature through the absorption of RF energy in the skin. The system causes pain and ultimately reduces combat power. A cell-type continuous electromagnetic radiation system consisting of four parts—an electromagnetic-wave generator, a high-voltage power supply, a test cell, and a system controller—generates an RF signal of ≥1 W in a continuous waveform at a 95-GHz center frequency, as well as a chemical solution with a dielectric constant similar to that of the skin of a living organism. An increase of 5 °C lasting approximately 10 s was confirmed through an experiment.     

Explosion temperature mapping of emulsion explosives containing TiH2 powders with the two-color pyrometer technique

In the study, the two-color pyrometer technique was used to measure the transient temperature field of emulsion explosives with different contents of TiH₂ powders. The experimental results showed that the introduction of TiH₂ powders could significantly increase the explosion temperature and fireball duration of emulsion explosive. When emulsion explosives were ignited, the average explosion temperature of pure emulsion explosive continuously decreased while emulsion explosives added with TiH₂ powders increased at first and then decreased. When the content of TiH₂ powders was 6 mass%, the explosion average temperature reached its maximum value of 3095 K, increasing by 43.7% as compared with that of pure emulsion explosive. In addition, the results of air blast experiment and explosion heat test showed that the variation trends of shock wave parameters, explosion heat and theoretical explosion temperature of emulsion explosives with different contents of TiH₂ powders were basically consistent with that of explosion temperature measured by the two-color pyrometer technique. In conclusion, the two-color pyrometer technique would be conducive to the formula design of emulsion explosive by understanding the explosion temperature characteristics.