BLT方程在任意布局传输线串扰分析中的应用

应用BLT方程对任意布局传输线间的串扰进行分析.将传输线离散,并引入理想节点的概念计算离散时引入节点的散射参数,将传输线等效为多导体传输线网络进行求解.主要针对非平行线及交叉线两种具有代表性的传输线布局进行分析,数值算例表明了方法的有效性,能够对电磁兼容中的串扰分析提供理论指导.     

Supply chain coordination with product line design and a revenue sharing scheme

Many manufacturers sell their products through retailers and share the revenue with those retailers. Given this phenomenon, we build a stylized model to investigate the role of revenue sharing schemes in supply chain coordination and product variety decisions. In our model, a monopolistic manufacturer serves two segments of consumers, which are distinguished by their willingness to pay for quality. In the scenario with exogenous revenue sharing ratios, when the potential gain from serving the low segment is substantial (e.g., the low‐segment consumers' willingness to pay is high enough or the low segment takes a large enough proportion of the market), the retailer is better off abandoning the revenue sharing scheme. Moreover, when the potential gain from serving the low (high) segment is substantial enough, the manufacturer finds it profitable to offer a single product. Furthermore, when revenue sharing ratios are endogenous, we divide our analysis into two cases, depending on the methods of cooperation. When revenue sharing ratios are negotiated at the very beginning, the decentralized supply chain causes further distortion. This suggests that the central premise of revenue sharing—the coordination of supply chains—may be undermined if supply chain parties meticulously bargain over it.     

一种应用于移动机器人的路径跟踪控制方法

针对移动机器人的路径跟踪复杂性问题,设计了一种易于实现的控制系统,其中的跟踪策略改进了传统的视线导航算法,使机器人光滑趋近到期望路径,控制器的设计采用基于模糊逻辑的变速度控制和角速度滑模控制,减小了角速度的抖振,并使控制具有一定的智能化特点.实验结果表明,设计的控制系统即可以保证路径跟踪的精度,同时避免了运动控制的不稳定性.     

装备研制中技术风险的灰色综合评估

指出装备研制中技术风险的表现形式,建立了技术风险评估的指标体系,阐述了基于灰类白化权函数将定性指标定量化的方法,建立了利用群灰关联度进行综合评估的模型。最后,结合实例验证说明了该模型对研制方案技术风险评估的可用性。     

适合于电路集成的PBG结构微带线

研究了光子带隙结构支撑的微带线。采用在接地板上光刻出光子带隙结构形成新型的微带线 ,利用FDTD数值仿真和实验的方法进行了研究。分析了方孔的情况 ,并对三级级联光子带隙结构构成滤波器的情况进行了研究。给出了频率传输特性曲线 ,验证了此种结构频率禁带的存在。     

基于一种模型的中子星结构

从物态方程出发,利用中子星结构方程计算了中子星的结构。得到了引力质量材M_G=1.27M_θ材,转动惯量I=1.29x10(45)g/cm~2,与观测结果符合较好。     

Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

变质心弹道导弹攻击航母分析

针对地面或海上低速移动目标的特点,运用理论力学、空气动力学及变质心控制方法,探索变质心姿态控制问题。研究了变质心弹头控制质量块移动的方法。通过移动质量块引起整个弹头质心的变化,进而改变弹头的气动配平力矩,修正惯性弹道,实现对地面或海上低速目标的有效攻击。     

基于新的定位方法的空投技术研究

针对空投技术的定位问题,提出了一种新的定位方法。首先,在空投目标区域放置发射机,发射天线在3个方向形成彼此相交的波束,发射机与3个波束的交点构成中心线,3个波束关于中心线对称。其次,发射天线在3个方向发射相同功率,不同频率的信号。最后,载荷上的接收机实时接收信号,经傅里叶变换得到信号频谱图。3个信号功率相等时载荷位于中心线上,保持现有飞行方向;3个信号功率不等时,根据偏离中心线的位置对飞行方向进行调整,确保载荷能够准确到达目标区域。该方法具有较高的定位精度,能够适应复杂电磁环境。     

坦克直瞄/间瞄射击一体化火控技术

直瞄射击方式是目前坦克采用的主要射击方式。直瞄射击方式受战场通视度及瞄准装置视距的影响,最大射击距离一般在5 km左右。间瞄射击方式不需要直接瞄准目标,不受战场通视度的影响,最大射击距离主要取决于火炮及弹药的性能,一般在10 km以上。未来坦克应具备直瞄射击与间瞄射击一体化能力。通过直瞄/间瞄射击火控技术的对比与分析,提出坦克直瞄/间瞄射击一体化火控方案。一体化火控具有新的技术特色,具有更强的综合作战能力,是未来坦克火控技术发展的一种趋势。