厚/薄梁和板的通用动力有限单元

本文以位移模式,从研究通用于厚/薄梁的动力有限单元入手,得到了通于薄板和中厚板的九个自由度三角形和十二个自由度矩形动力有限单元。     

致伤因素及其对目标综合效应的估算方法

本文综述了致伤因素对目标的致伤效果,取决于击中的部位和释放能量的多少,且随着击中部位和因素的改变而不同。指出各因素对目标的致伤作用既有相互影响又有其独立性。并给出了致伤因素对目标综合效应的估算公式。     

基于 ∆TOA 和方位角测量辅以间歇高度信息的双基地定位跟踪技术

本文讨论了双基地雷达系统中一种以收站△TOA和方位角测量为基础并辅以发射站传送的间歇高度信息的运动目标三维定位跟踪算法,详细分析了该技术的定位原理。在电子对抗条件下,发射站数据往往难以连续传送到接收站加以融合,因此有必要对间断传送的数据加以利用的方法进行研究。本文通过典型目标航迹的计算机仿真对该算法的性能做了评估。由于这种融合方法在双基地研究领域尚属初探,因此有待于在今后的研究中加以完善。     

GF(q)上多元多项式与钟控序列

本文讨论了有限域GF(q)(q=p~α,p≥2为素数,α≥1为正整数)上多元多项式与钟控序列的周期和线性复杂度的关系。当前馈函数g(x_1,x_2,…,x_n)∈GF(q)[x_1,x_2,…x_n]为一次多项式时,我们给出了钟控序列到达最大周期与线性复杂度的充要条件。     

熔融织构（MTG）的YBa2Cu3O7-δ块材的交流磁化率研究

本文通过控制温度梯度和降温速率等烧结工艺制备了熔融织构的YBa_2Cu_3O_(7-8)块材,经结构分析和交流磁化率测量,发现样品晶粒择优取向,样品开始出现抗磁信号的温度为92K,交流磁化率虚部只存在一个反映晶粒内部损耗的小尖峰。施加直流场0-600高斯,小尖峰向低温移动,峰的半宽度略有展宽,峰的高度增强。用磁滞损耗解释了上述结果。     

阻止差分密码攻击的有效方法

差分密码分析方法是1990年由E.Biham和A.Shamir提出的,这种方法对DES算法及DES类体制构成了威胁。本文在剖析了差分密码分析方法工作原理的基础上,提出了改进DES算法的7种方法,从而可以有效地阻止差分密码分析法的攻击。     

强脉冲 CO2 激光与靶的相互作用

在真空背景下的实验表明,当微秒量级的强脉冲激光与靶材相互作用时,由于靶材的升华,激光维持爆震波依然存在。爆震波产生的压缩波传入靶内,该应力波的作用是材料破坏的重要因素。而强脉冲激光引起的汽化反冲压力、热应力和烧蚀破坏也是不可忽视的因素。实验还表明,在真空背景下维持爆震波足以将后续激光屏蔽。     

点阵图形的二次压缩法

基于YH-1巨型机,本文详细介绍了一种计算机图形的二次压缩法。该方法已经在YHHT 图形软件上成功地实现,应用结果证明这种方法是高效的。     

An exact analysis of a joint production‐inventory problem in two‐echelon inventory systems

We consider a two‐echelon inventory system with a manufacturer operating from a warehouse supplying multiple distribution centers (DCs) that satisfy the demand originating from multiple sources. The manufacturer has a finite production capacity and production times are stochastic. Demand from each source follows an independent Poisson process. We assume that the transportation times between the warehouse and DCs may be positive which may require keeping inventory at both the warehouse and DCs. Inventory in both echelons is managed using the base‐stock policy. Each demand source can procure the product from one or more DCs, each incurring a different fulfilment cost. The objective is to determine the optimal base‐stock levels at the warehouse and DCs as well as the assignment of the demand sources to the DCs so that the sum of inventory holding, backlog, and transportation costs is minimized. We obtain a simple equation for finding the optimal base‐stock level at each DC and an upper bound for the optimal base‐stock level at the warehouse. We demonstrate several managerial insights including that the demand from each source is optimally fulfilled entirely from a single distribution center, and as the system's utilization approaches 1, the optimal base‐stock level increases in the transportation time at a rate equal to the demand rate arriving at the DC. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Approximation methods for the analysis of a multicomponent,multiproduct assemble‐to‐order system

In this article, we consider the performance evaluation of a multicomponent, multiproduct assemble‐to‐order (ATO) system. Each component is managed independently using a base‐stock policy at a supply facility with limited production capacity and an infinite buffer. The arrivals of demands follow a multivariate Poisson process and unfilled demands are backlogged. Because exact analysis of the proposed system is not feasible, we propose two approximation methods which provide upper and lower bounds for various performance measures such as fill rate, average waiting time, and average number of backorders of the proposed system. Our computational experiments demonstrate the effectiveness of the two approximation methods under various system settings. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011