BSC信道下线性分组码的差错概率下界分析

针对BSC信道,提出了一种线性分组码的最大似然译码差错概率下界的计算方法.根据最大似然译码算法原理,首先将译码差错概率转化为差错事件的联合概率,基于改进的Dawson-Sankoff界的优化准则,推导出BSC信道下线性分组码差错冗余事件的判决准则,最后得到差错概率下界的计算表达式.该下界只依赖于码字的Hamming重量...     

Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

A model for step‐stress accelerated life testing

Modern technology is producing high reliability products. Life testing for such products under normal use condition takes a lot of time to obtain a reasonable number of failures. In this situation a step‐stress procedure is preferred for accelerated life testing. In this paper we assume a Weibull and Lognormal model whose scale parameter depends upon the present level as well as the age at the entry in the present stress level. On the basis of that we propose a parametric model to the life distribution for step‐stress testing and suggest a suitable design to estimate the parameters involved in the model. A simulation study has been done by the proposed model based on maximum likelihood estimation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

压制火控系统中有关最大射程角的应用探讨

通过对实际应用中,压制火控系统射击诸元中有关最大射程角的具体使用进行了分析,提出了在地面压制武器系统外弹道中距离-射角函数可能出现多个极点的观点,并给出了最大射程角具体计算方法,在火控系统的工程实践中提高了武器系统的性能。     

基于小波变换模极大值的自适应阈值图像去噪算法

依据白噪声小波变换性态与信号奇异性相比具有显著不同的特点,在大尺度下设置阈值,去掉噪声信号而保留图像细节信号引起的模极大值点。在阈值设置问题上,采用自适应阈值的方法,克服单一阈值不能在每级尺度上将信号与噪声作最大分离的缺点。实验表明,与单一阈值去噪方法相比,该方法不仅可以保留图像边缘信息,而且能提高去噪后图像的峰值信噪比2~5 dB。     

考虑可信度时导弹最大射程的Bayes评估

首先讨论了一种验前数据和现场试验数据相容性检验的新方法, 考虑验前信息可信度, 研究了导弹最大射程的 Ｂａｙｅｓ 评定和 Ｂａｙｅｓ 估计。最后给出了数据分析的例子。     

故障类别的模糊聚类分析

本文通过故障状态-特征的模糊聚类分析,按故障间的相似性对故障进行分类,然后按类别实施故障诊断,可在最少监测点的条件下,获得最多的设备运行故障信息。从而简化故障诊断过程,提高诊断速度和精度。     

人体静电极端值的分析研究

本文在讨论人体静电定义的基础上,分析各国报导人体静电极端值差异的原因,经理论分析和实验验证,给出人体静电电位的取值范围:10~(-2)～10~5V,并证明人体静电极端值60kV 是可信的.     

Single machine sequencing with linear models of release dates

The paper deals with a problem of scheduling a set of jobs on a single machine. Before a job is released for processing, it must undergo some preprocessing treatment that consumes resources. It is assumed that the release date of a job is a linear decreasing continuous function of the amount of a locally and globally constrained, continuously divisible resource (e.g., energy, catalyzer, financial outlay, gas). The problem is to find a sequence of jobs and a resource allocation that will minimize the maximum job completion time. Such a problem appears, for example, in the ingot preheating and hot-rolling process in steel mills. It is shown that the problem is strongly NP-hard. Some polynomially solvable cases of the problem and approximate algorithms with both experimental and worst-case analysis are presented. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 99–113, 1998     

On lifetimes in random environments

For a component operating in random environment, whose hazard rate is assumed to be the realization of a suitable increasing stochastic process, conditions are found such that its lifetime is increasing in likelihood ratio (ILR). For the lifetimes of two components of the same kind some comparisons based on partial stochastic orders are presented. Some applications to the case of repairable components are finally provided. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 365–375, 1998