全CFRP筋混凝土柱低周反复荷载试验研究

考虑轴压比、剪跨比和配箍形式的影响,对6根全CFRP筋混凝土柱进行低周反复荷载试验,通过分析滞回曲线、骨架曲线、位移延性系数和耗能能力等特征,研究CFRP筋混凝土柱的抗震性能。试验结果表明:CFRP筋混凝土柱具有较强承载能力和变形能力;轴压比和剪跨比是影响试件抗震性能的主要因素,轴压比越小,试件的变形和耗能能力越强,刚度退化越平缓,剪跨比越大,试件的变形能力越强;通用屈服弯矩法计算得到的延性系数能够较好反映CFRP筋混凝土柱的延性,轴压比越小、剪跨比越大,试件的延性越好;新型螺旋式矩形箍筋在试件延性及耗能方面表现良好,可以应用于工程实际。     

滤波器阶数对导航接收机时域抗干扰的影响分析

滤波器阶数是影响卫星导航接收机时域自适应抗干扰性能和计算复杂度的核心参数。为了解决当前阶数选取严重依赖工程经验而影响分析不足的问题,分析了滤波器阶数对导航接收机时域自适应抗干扰性能的影响,可为导航接收机低复杂度时域抗干扰的研究提供理论支撑。该分析面向不同干扰环境,分别以滤波器幅频响应和信号载噪比为评估指标,并通过仿真实验和实测对传统最小均方算法和改进型最小均方算法进行验证,提出了一种基于数字滤波器设计的自适应最优滤波器阶数的设计方法。实验数据分析表明,通过适当提升滤波器长度,可以有效提升时域自适应滤波器的抗干扰性能;在实际应用中,可根据实际抗干扰需求,对滤波器阶数进行优化设计。     

Efficient algorithms for flexible job shop scheduling with parallel machines

Job shop scheduling with a bank of machines in parallel is important from both theoretical and practical points of view. Herein we focus on the scheduling problem of minimizing the makespan in a flexible two-center job shop. The first center consists of one machine and the second has k parallel machines. An easy-to-perform approximate algorithm for minimizing the makespan with one-unit-time operations in the first center and k-unit-time operations in the second center is proposed. The algorithm has the absolute worst-case error bound of k − 1 , and thus for k = 1 it is optimal. Importantly, it runs in linear time and its error bound is independent of the number of jobs to be processed. Moreover, the algorithm can be modified to give an optimal schedule for k = 2 .     

旋转调制式捷联惯导误差分析

系统级旋转自补偿技术可以使捷联惯性导航系统的误差发散得到一定程度的抑制,是在现有元件水平不变的情况下提高系统精度的有效方法.对于不同的误差项,旋转补偿技术具有不同的调制效果.针对目前研究较为广泛的8位置双轴转位调制方素,对被调制后的误差公式进行了推导和分析,分析发现:常值零偏、逐次启动漂移以及缓变漂移都可以得到较好的调...     

尾流自导鱼雷最小开机距离及其应用研究

基于尾流自导鱼雷的制导原理、弹道和自导开机过程,提出了最小开机距离的概念。分析指出了影响尾流自导鱼雷最小开机距离的主要因素是设定的鱼雷深度、鱼雷的航行精度和目标运动参数散布等。建立了最小开机距离的计算模型,并在不同攻击态势下进行了仿真计算和统计分析,得出了有益的结论:在一定的攻击条件下,不同的设定深度、使用不同的鱼雷速制以及不同的目标运动要素误差、鱼雷航行精度,将使鱼雷的最小开机距离不同,即鱼雷的最小开机距离实际上是关于各种因素的函数。通过最小开机距离可以进一步计算出鱼雷自导开机的最大距离,若在工程中予以实现,将对提高潜艇攻击的隐蔽性和鱼雷作战效能具有重要意义。     

考虑目标定位误差的点目标毁伤概率求解

根据射击毁伤理论和概率统计学,在现有点目标毁伤概率求解方法基础之上提出考虑目标定位误差的解析法和仿真法.计算结果表明2种方法均准确可行.通过对比分析得出不同弹药量、不同目标特性条件下,定位误差对毁伤概率的影响程度.运用解析法得出点目标的单发命中概率服从χ2分布,通过大量仿真得出目标定位误差可忽略的条件为WmaxRCEP/ω.     

Problem of the reference height of the projectile trajectory as a reduced meteo-ballistic weighting factor

This paper deals with the issue of preparation of the aiming angles with the use of tabular firing tables and needed determination of the ballistic elements μ_B (ballistic wind w_B, w_xB, w_ZB, ballistic (virtual) temperature τ_B, ballistic density ρ_B) from the standardized met messages. The weighting factors are used for the calculation of ballistic elements μ_B that are incorporated into the trajectory calculations characteristics of weapon and ammunition. Two different methodologies practically used in the praxis are analysed and compared. For the comparison of the two methodologies the reference height of trajectory determined from the weighting factor functions is employed. On the basis of the analyses conducted, the potential for further increase in accuracy of these aiming angles preparation methods is pointed out.     

某导弹半实物仿真系统误差建模及影响分析

半实物仿真是导弹飞控系统研制过程中的必要环节,各仿真设备的误差对于仿真结果的影响不容忽视。借助于某型导弹半实物仿真系统的搭建,对影响仿真精度的各项主要误差进行了研究。通过理论推导建立了三轴转台、负载模拟台和数据采集的误差模型,与半实物仿真试验进行对比验证其有效性。最后,基于蒙特卡洛统计原理完成误差模型对仿真结果的影响分析。结果表明：各项误差模型能够满足仿真精度的分析要求,为类似半实物仿真系统的分析、测量和误差补偿提供理论依据。     

Signature based analysis of m‐Consecutive‐k‐out‐of‐n: F systems with exchangeable components

In this article, we study reliability properties of m‐consecutive‐k‐out‐of‐n: F systems with exchangeable components. We deduce exact formulae and recurrence relations for the signature of the system. Closed form expressions for the survival function and the lifetime distribution as a mixture of the distribution of order statistics are established as well. These representations facilitate the computation of several reliability characteristics of the system for a given exchangeable joint distribution or survival function. Finally, we provide signature‐based stochastic ordering results for the system's lifetime and investigate the IFR preservation property under the formulation of m‐consecutive‐k‐out‐of‐n: F systems. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

一种基于核心数据区监视的交叉验证方法

通常商用体系结构模拟器不开源,仿真过程中无法直接获取中间结果.提出了一种基于核心数据区监视的交叉验证方法,可将体系结构模拟器运行过程中核心数据区的变化情况提取出来,用以支持该模拟器与寄存器传输级代码的模拟结果进行交叉比对,快速精确定位两者的执行差异,提高验证人员的查错效率.实验分析和实际应用表明,本方法比传统方法可将查...