长贮过程中发动机HTPB推进剂老化机理分析

为揭示固体推进剂在长期贮存过程中的老化机理,解剖了自然贮存19年贴壁浇注的端羟基聚丁二烯橡胶推进剂装药发动机,沿着药柱径向不同位置进行了取样,并采用扫描电镜、能量色散X射线光谱仪、红外吸收光谱、交联密度等多种手段对这些样品进行了测试分析。研究发现：贴壁浇注发动机药柱不同位置推进剂的老化程度不尽相同,越靠近非金属壳体位置,推进剂的老化程度越严重。进一步深入分析表明：除了丁羟胶中双键的氧化断链和端羟基的缩合等影响推进剂老化,铝粉氧化产生的铝离子会催化丁羟胶双键与氯气或水发生加成反应生成■双键和仲醇,而铝离子迁移和分布的不均匀会引起药柱老化的不均匀性。研究结果对推进剂配方设计和防老化措施的研究具有重要意义。     

Numerical simulation of base flow with hot base bleed for two jet models

In order to improve the benefits of base bleed in base flow field, the base flow with hot base bleed for two jet models is studied. Two-dimensional axisymmetric Navier–Stokes equations are computed by using a finite volume scheme. The base flow of a cylinder afterbody with base bleed is simulated. The simulation results are validated with the experimental data, and the experimental results are well reproduced. On this basis, the base flow fields with base bleed for a circular jet model and an annulus jet model are investigated by selecting the injection temperature from 830 K to 2200 K. The results show that the base pressure of the annular jet model is higher than that of the circular jet model with the changes of the injection parameter and the injection temperature. For the circular jet model, the hot gases are concentrated in the vicinity of the base. For the annular jet model, the bleed gases flow into the shear layer directly so that the hot gases are concentrated in the shear layer. The latter temperature distribution is better for the increase of base pressure.     

Study of simple plane wave generator with an air-metal barrier

Plane wave generators (PWGs) are used to accelerate flyer plates to high velocities with their generated plane waves, which are widely used in the test of dynamic properties of materials. The traditional PWG is composed of two explosives with different detonation velocities. It is difficult to implement the related fabrication processes and control the generated waves due to its complicated structures. A simple plane wave generator is presented in this paper, which is composed of two identical cylindrical high explosive (HE) charges and an air-metal barrier. A theoretical model was established based on two different paths of the propagation of detonation waves, based on which the size of air-metal barrier was calculated for a given charge. The corresponding numerical simulations were also carried out by AUTODYN-2D^® based on the calculated results, which were used to compare with the theoretical calculations. A detonation wave with a flatness of 0.039 μs within the range of 70-percent diameter of the main charge was obtained through the simulations.     

氦原子1S, 3S, 1P, 3P态的电子关联计算

本文从二次量子化公式出发,选取广义Laguerre多项式乘以γ~lcxp(-alγ)作为单电子径向函数完全集,这里a_l是依赖于轨道角动量l的变分参数,用组态相互作用方法计算了氨原子~1S,~3S,~1P,~3P态的能量和波函数。当组态限于主量子数n≤4,计算的能量相对精度约为99.9%;当组态限于%≤6,能量相对精度约为99.99%;而Hartree Fock方法的能量相对精度约为99%,利用原子波函数计算了一些原子参数,其结果与其他作者的结果符合很好。     

弹道冲击下层合板破坏模式及抗弹性能实验研究

以舰用轻型复合装甲研究为背景,针对不同纤维增强种类(包括玻纤织物 C400、C200、SW220 和芳纶纤维织物T750)以及不同面密度层合板结构,在6.2 g刚性微曲面柱形弹弹道冲击下的防护能力展开实验研究,着重讨论了层合板结构弹道冲击下破坏模式、弹体初始侵彻速度及面密度与抗弹能力和抗弹效率之间的关系,认为不同的破坏模式体现了不同的吸能特性和纤维失效机理.     

装备保障训练变革的范式理论研究

将科学范式的思想引入装备保障训练变革研究中,提出了装备保障训练范式的概念,分析了信息化条件下装备保障训练范式的主要特征,基于自组织进化理论设计了装备保障训练范式的变革路径．研究成果为开展信息化条件下装备保障训练变革理论研究和实践提供了方法指导．     

多孔材料药型罩聚能射流的形成条件

依据Herrmann状态方程和斜冲击波关系估算了多孔材料药型罩压垮之前的冲击温升,求解了经过冲击压缩卸载后材料的声速。给出了多孔材料药型罩聚能射流的形成条件。初始冲击温升会使材料的声速和强度降低,从而使多孔材料聚能射流形成射流的高速和低速条件降低。     

复杂系统理论对作战实践的指导

比较研究了机械模式与复杂系统模式的两种作战系统观,分析了复杂系统的整体性、非线性、开放性、自适应性、不确定性等特点。然后,根据作战系统是一复杂系统这一基本观点,并以复杂系统理论为指导,探讨了作战中的指挥控制、进攻作战、防御作战的一些基本策略。     

驱动管中柱状装药爆轰过程的数值模拟

数值模拟了爆炸驱动管中柱状装药内爆轰波的传播过程.计算采用欧拉型有限体积方法,炸药及爆轰产物均采用JWL状态方程,空气采用理想气体状态方程,采用"点火-生长"模型计算化学反应速率.计算得到了驱动管内波系结构的发展过程,爆速与经验公式符合得较好.计算表明,驱动管侧壁的压力峰值在800MPa以上,而在管底中心处,由于激波的汇聚,压力峰值高达12.4GPa.     

现代西方教学效能:研究范式与发展趋势

本文以对范式和教学效能这两个概念的内涵为切入点,从时间发展的维度出发,对现代西方教学效能的主要研究范式:过程-先前经验研究范式;过程-系统性研究范式;过程-结果研究范式;实验性研究范式;过程-过程研究范式;过程-过程-结果研究范式这六个方面进行了分析,最后对其未来的发展趋势进行了阐述。