Scheduling and lot streaming in two‐machine open shops with no‐wait in process

We study the problem of minimizing the makespan in no‐wait two‐machine open shops producing multiple products using lot streaming. In no‐wait open shop scheduling, sublot sizes are necessarily consistent; i.e., they remain the same over all machines. This intractable problem requires finding sublot sizes, a product sequence for each machine, and a machine sequence for each product. We develop a dynamic programming algorithm to generate all the dominant schedule profiles for each product that are required to formulate the open shop problem as a generalized traveling salesman problem. This problem is equivalent to a classical traveling salesman problem with a pseudopolynomial number of cities. We develop and test a computationally efficient heuristic for the open shop problem. Our results indicate that solutions can quickly be found for two machine open shops with up to 50 products. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

战术移动Ad Hoc网络下的分布式位置辅助功率控制算法

针对战术移动自组(AdHoc)网络提出一种分布式位置辅助的功率控制算法(LAPCA),它通过位置预测来推算节点的邻节点数目,进而调整信号发射功率,以保持最佳的网络连通性,由此提高整个网络的有效流量。该算法作为一个独立模块可以方便地与已有的移动自组网络路由协议相结合。采用较为适合战术环境的参考点群组移动(RPGM)模型来产生网络仿真场景,从仿真实验结果来看,几乎在所有的RPGM场景下采用该算法后的网络有效流量相对于纯粹的AODV路由协议都得到了提高。     

Properties of the geometric and related processes

Some properties of the geometric process are studied along with those of a related process which we propose to call the α‐series process. It is shown that the expected number of counts at an arbitrary time does not exist for the decreasing geometric process. The decreasing version of the α‐series process does have a finite expected number of counts, under certain conditions. This process also has the same advantages of tractability as the geometric process; it exhibits some properties which may make it a useful complement to the increasing geometric process. In addition, it may be fit to observed data as easily as the geometric process. Applications in reliability and stochastic scheduling are considered in order to demonstrate the versatility of the alternative model. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

粘弹性界面裂纹相似界面单元聚缩解

提出了粘弹性界面裂纹分析的相似界面单元聚缩解法。该方法在裂纹尖端附近划分相似界面单元,多层相似单元形成一个子结构;然后利用相似界面单元具有类似刚度矩阵的特点,将子结构内的大量自由度聚缩后再求解。作为算例,求解了双粘弹性材料和弹—粘弹性材料矩形板单边裂纹的拉伸问题。     

变论域模糊自适应滑模有限时间收敛制导律

针对拦截高速机动目标的需求,研究了一种变论域模糊自适应滑模有限时间收敛制导律。推导了导弹-目标空间拦截模型,设计了三维滑模制导律;根据有限时间收敛制导律专家的经验,采用模糊自适应控制方法对滑模制导律的非切换项进行逼近,并设计了有限时间收敛模糊控制规则;提出了一种新型变论域伸缩因子,设计了基于新型伸缩因子的变论域模糊自适应滑模有限时间收敛制导律。仿真结果表明,所设计的制导律能够使导弹准确命中目标,并能够达到视线角速率有限时间收敛,且与比例制导律相比,具有更高的制导精度和更短的飞行时间。     

一种针对基因识别的GHMM简化算法

广义隐Markov模型是计算机基因识别的一种重要模型,它克服了传统隐Markov模型的状态段长成几何分布的缺陷,更加适合于计算机基因识别。其缺点在于计算量大,需要采用有效的简化算法。利用基因的结构特点,在不附加额外限制条件的情况下,提出了一种新的简化算法,其计算复杂度是序列长度的线性函数。对实际生物序列数据的测试结果表明了此简化算法的有效性。     

直升机工作特性建模与飞行性能仿真

以涡轮轴发动机工作特性建模为中心,对某系列直升机飞行性能进行仿真研究,力争实现对直升机实施"基于状态的维修"。讨论了直升机飞行性能和涡轮轴发动机特性的表述方法,建立了涡轮轴发动机的数学模型,并讨论了其解法与应用。基于发动机台架性能仿真程序对该模型进行简化,得到涡轮轴发动机工作过程的热力学模型。对发动机性能进行计算完成飞行性能仿真,应用结果表明该方法是可信、高效的。     

并联机构奇异点的运动分岔研究

采用静态分岔理论研究一般并联机构在奇异点处的运动分岔现象。通过约束方程研究了几种简单机构在驱动奇异和末端执行器奇异下的不同分岔类型,并研究了机构参数对分岔性态的影响。指出非持久性奇异分岔可以通过调整机构参数转换为持久性奇异分岔,从而克服机构在奇异点邻域内的运动不确定性。     

Numerical simulation of warhead transportation

The new numerical approach for analysis of the warhead transportations is suggested.This approach allows to control the warhead operability before its experimental analysis.The approach is implemented by the adequate models for the software ANSYS.Analysis of the loads at land operations and trans-portations of the warhead by natural roads,water and aviation allows to obtain the maximal values of loads,which are used in numerical simulations of the warhead.These loads give an opportunity to analyze the operability and the fatigue strength of the cartridge warhead.The numerical simulations of the attachments of the warhead combat elements are performed on the basis of the suggested method.The data of the numerical simulations verifies the operability of the fastener system of the warhead combat elements.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.