排序方式: 共有78条查询结果,搜索用时 0 毫秒
11.
《防务技术》2020,16(1):201-207
Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates. 相似文献
12.
随着我国科技进步及建筑节能需要,特别是近年钢结构建筑体系的推广,金属复合板得到迅猛发展。从分析金属复合板的材料性能和火灾特点入手,就工程施工、使用过程中存在的消防安全问题及防范措施进行了探析。 相似文献
13.
以45^#金属套和氮化硅陶瓷柱为研究对象,采用有限元法分析了不同过盈量下金属套/陶瓷柱外伸式过盈连接的应力分布规律。结果表明:陶瓷柱在接触边缘均存在明显的边缘效应,轴向应力梯度较大;金属套在接触边缘内侧存在显著的应力集中,其值远大于对应位置陶瓷柱的压应力,易于导致陶瓷材料破坏。采用热胀法进行了试验验证,过盈连接试样均在12h内发生自然断裂,较好地验证了有限元分析结果。 相似文献
14.
《防务技术》2019,15(3):272-275
The possibility of identifying gunshot residue (GSR) particles produced by non-toxic primers containing only titanium and zinc is a very difficult task using SEM/EDX analysis employed in the analysis of GSR originating from primers containing lead, barium and antimony. However, Bauer et al. demonstrated that non-toxic (TiZn) primers form a TiZn2O4 spinel crystalline structure using SEM/EDX with EBSD (Electron Back Scatter Diffraction) and TKD (Transmission Kikuchi Diffraction), whereas GSR originating from gadolinium-doped TiZn primers form a non-crystalline glass phase. Here, a possible explanation of these different phenomena is hypothesized. 相似文献
15.
采用电液伺服材料试验机的位移加载方式,对金属橡胶/橡胶复合叠层耗能器进行动态试验研究,结果表明:耗能器的恢复力同时受频率和振幅的影响具有非线性迟滞特性。在此基础上,结合理论分析建立耗能器的动力学模型,提出一种参数分离识别法,辨识出模型中的未知参数。将辨识结果与试验曲线进行对比,结果表明,所建模型可靠,且参数识别精度能够满足工程应用的要求。 相似文献
16.
镍对重力分离SHS陶瓷内衬复合管的影响 总被引:5,自引:1,他引:4
采用SHS重力分离技术制备陶瓷内衬复合管,通过改变主燃烧配系组元Ni的含量,研究分析了金属Ni对陶瓷内衬复合管制备的燃烧特性及机械性能的影响。研究发现,适量的Ni粉能促进SHS燃烧进行,提高燃烧体系的绝热燃烧温度和陶瓷层的致密度,并且有助于形成金属/陶瓷界面过渡层,这极大提高了复合管的显微硬度和抗压剪强度。当Ni粉含量为19wt%时,陶瓷层的显微硬度和抗压剪强度分别最高达1764N/mm2和36.1MPa。 相似文献
17.
增强材料芳纶纤维在减振降噪橡胶制品中的应用 总被引:3,自引:1,他引:2
论述了橡胶制品用骨架材料芳纶纤维的发展、结构及其性能,并结合橡胶减振消声制品的发展,阐述了芳纶纤维在该类产品中的潜在应用前景. 相似文献
18.
19.
《防务技术》2014,10(1):47-59
Quenched and Tempered (Q&T) steels are widely used in the construction of military vehicles due to its high strength to weight ratio and high hardness. These steels are prone to hydrogen induced cracking (HIC) in the heat affected zone (HAZ) after welding. The use of austenitic stainless steel (ASS) consumables to weld the above steel was the only available remedy because of higher solubility for hydrogen in austenitic phase. The use of stainless steel consumables for a non-stainless steel base metal is not economical. Hence, alternate consumables for welding Q&T steels and their vulnerability to HIC need to be explored. Recent studies proved that low hydrogen ferritic steel (LHF) consumables can be used to weld Q&T steels, which can give very low hydrogen levels in the weld deposits. The use of ASS and LHF consumables will lead to distinct microstructures in their respective welds. This microstructural heterogeneity will have a drastic influence in the fatigue crack growth resistance of armour grade Q&T steel welds. Hence, in this investigation an attempt has been made to study the influence of welding consumables and welding processes on fatigue crack growth behaviour of armour grade Q&T Steel joints. Shielded metal arc welding (SMAW) and Flux cored arc welding (FCAW) were used for fabrication of joints using ASS and LHF consumables. The joints fabricated by SMAW process using LHF consumable exhibited superior fatigue crack growth resistance than all other joints. 相似文献
20.
Mat Hardy 《Small Wars & Insurgencies》2013,24(3):467-491
This article seeks to compare Australia's involvement in two key 1990s peace missions: those to Somalia in 1992–93 and Rwanda in 1994–95. While there are many similarities between the two missions in terms of time, scale and theatre, the differences are more important. Both missions are usually recalled as failures despite the Australian troops having been extremely successful in their roles during both deployments. Moreover the experiences with intervention in Africa seem to have forever blighted Australian participation in peace missions on that continent. 相似文献