舰船微生物腐蚀研究进展

在舰船的舱底积水和海水管系中,微生物腐蚀是重要的腐蚀形式之一。在众多的微生物中以硫酸盐还原菌(SRB)的腐蚀最为严重,主要表现为微生物的生长代谢在金属表面形成生物膜,改变了生物膜内的微环境,其代谢产物与金属基体相互作用,加速了金属的腐蚀过程.从微生物的生理学、腐蚀机理等角度,对舰船材料的腐蚀危害、微生物腐蚀研究方法和腐蚀防治措施以及微生物腐蚀的近期研究状况等几个方面进行了综述,并展望了微生物腐蚀研究的发展趋势.     

应用电弧喷涂技术治理舰船钢结构腐蚀

本文论述了舰船钢结构的腐蚀机理,腐蚀特点及影响因素.指出电弧喷涂铝复合涂层能够长期有效地对舰船钢结构进行腐蚀保护,延长舰船钢结构的使用寿命,这是其它任何腐蚀防护技术都难以实现的.电弧喷涂铝复合涂层的具体涂层设计是:电弧喷涂铝金属涂层十有机封闭涂料涂层十常规舰船面层涂料涂层.     

基于等效电路和点电流源的潜艇水下腐蚀电场估算

为了对潜艇涂层破损状态的水下腐蚀电场进行快速评估,基于电化学腐蚀原理和潜艇结构特点,建立潜艇涂层局部破损时的腐蚀电流等效电路,对潜艇涂层局部破损时的腐蚀电流强度进行估算,并基于点电流源对潜艇腐蚀电场建模,将潜艇涂层破损部位和裸露螺旋桨等效为点电流源,利用点电流源在分层介质中的电场计算公式对潜艇涂层破损时的腐蚀稳恒电场进行估算。与某型潜艇腐蚀电场商业有限元软件COMSOL仿真结果对比表明：该估算方法得到的潜艇表面腐蚀电流和不同路径电场分布曲线规律与COMSOL仿真结果基本一致,电流估算值相对误差不超过6.5%,电场各分量峰峰值相对误差不超过18%。     

A three-stage model for the perforation of finite metallic plates by long rods at high velocities

A three-stage theoretical model is presented herein to predict the perforation of a thick metallic plate struck normally by a long rod at high velocities. The model is suggested on the basis of the assumption that the perforation of a thick metallic plate by a long rod can be divided into three stages: (1) initial penetration; (2) plug formation and (3) plug slipping and separation. Various analytical equations are derived which can be employed to predict the ballistic limit, residual velocity and residual length of the long rod. It is demonstrated that the present model predictions are in good agreement with available experimental results for the perforation of finite steel targets struck normally by steel as well as tungsten alloy long rods at high velocities. It is also demonstrated that the dynamic maximum shear stress of a plate material has strong effect on plug formation and plug thickness which, in turn, exerts considerable influence on the residual velocities and lengths of a long rod at impact velocities just above the ballistic limit.     

金属热防护系统瞬态热分析的并联一维模型

建立了可重复使用运载器金属热防护系统瞬态热分析的并联一维模型.根据热防护系统的结构特点划分了多条热流通路,将各热流通路离散化后给出了单条通路瞬态传热的隐式差分格式,采用热平衡法推导了串、并联两种类型公共节点的局部控制方程,并给出了传热问题中常见边界条件的统一表达式,最终形成了总体控制方程.通过数值计算获得了热防护系统瞬态温度场.计算结果表明:采用并联一维模型可以更真实、更准确地反映热防护系统的传热过程,对于热防护系统结构优化设计有较高的参考价值.