卫星任务调度问题的约束规划模型

卫星任务规划与调度是空间资源管理的重要内容之一,其目的在于为卫星系统的任务计划编制提供科学合理的决策手段与依据。卫星任务调度问题的重要特点在于,调度任务存在可见时间窗口约束。只有在可见时间窗口内,调度任务才可能执行并完成。在进行合理假设的基础上,建立卫星任务调度问题的约束规划模型。对基本禁忌搜索算法进行改进,提出了模型求解的变邻域禁忌搜索算法。应用结果表明,约束规划模型的建立与求解是合理的。     

大延时网络中的主动队列管理机制

研究了网络延时对路由器主动队列管理机制的影响,分析了几种典型主动队列管理算法在大延时网络中的性能。在介绍了基于内模补偿的DC-AQM算法的优缺点之后,根据PID控制器延时补偿的Ziegler-Nichols设定方法,提出了ZNDC(Ziegler-Nichols delay compensation)AQM算法并进行了仿真实验验证,实验结果表明算法达到了预期的目标。     

非局部弹性杆固有频率的Ritz法求解

采用Ritz法求解了非局部弹性直杆的固有频率问题。非局部弹性理论与经典弹性理论相对应,区别在于非局部理论中,一点的应力与该点以及其周围区域的应变都有关,并采用核函数来表征这种相关性。基于Eringen提出的非局部弹性模型,针对三种给定核函数,用Ritz法进行了直杆的动力学分析。并针对两种边界条件给出直杆的固有频率,与其它方法比较,该方法具有可以针对多种核函数求解,精度可控,易于编程等优点。     

液体火箭发动机无失效条件下的可靠性分析方法

针对液体火箭发动机热试车过程中可能出现的无失效情况,在对寿命分布进行分析的基础上,利用配分布曲线-最小二乘法,采用经典估计和Bayes估计作为先验分布,对液体火箭发动机无失效条件下的可靠性进行了评估,并对评估结果进行了分析。计算结果表明,采用最小二乘法结合Bayes估计,可以较好评估液体火箭发动机在无失效条件下的可靠性。     

气囊辅助RTM制备复合材料承力筒内腔尺寸控制技术

根据气囊充压压力与复合材料承力筒内径之间的变化关系,给出了成型复合材料承力筒内表面的气囊尺寸计算方程。分析了气囊充压压力增大对承力筒的壁厚、纤维含量和弯曲性能的影响。采用气囊辅助RTM工艺整体制备出复合材料承力筒。试验结果表明,气囊充压压力使复合材料承力筒的壁厚减薄,纤维体积含量增加,弯曲性能提高;选择适当的气囊充压压力可以制备出满足设计要求的复合材料承力筒。     

基于气动-弹道一体化模型的飞行器外形优化设计

为提升飞行器气动外形优化设计效果,研究了新型飞行器在大空域、宽速域范围的气动适应性问题,提出一种基于气动-弹道一体化模型的外形优化设计方法.通过考虑气动和弹道的耦合作用,综合利用类型函数/形状函数转换技术、气动工程估算方法和Radau伪谱法,建立飞行器气动-弹道一体化模型.基于该模型,通过明确优化目标和约束条件,给出基...     

利用最小二乘支持向量机求解潜艇内外磁场映射模型

为提高潜艇磁隐身能力,应对潜艇固定磁场进行实时监测,提出利用最小二乘支持向量机的潜艇内外磁场映射方法。结合内外映射法和最小二乘支持向量机原理,通过交叉验证优化模型参数,建立由内到外的潜艇磁场映射模型。以潜艇外部垂向固定磁场变化量为分析对象,仿真和实验结果均与标准值吻合良好。与径向基神经网络算法相比,该方法的泛化能力和推算精度有明显提高,且更符合工程实际,对闭环消磁技术的研究具有指导意义。     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.     

Damage assessment of the target area of the island/reef under the attack of missile warhead

Under the background of vigorously developing facilities of island/reef in the world, the economic value and strategic significance of the island/reef have become increasingly important. Unfortunately, they may easily become the attacking target of missiles in the war time. Therefore, aiming at the damage quantification of the targets in the island/reef under the missile attacking, a macroscopic damage assessment model for the target area is proposed in this paper. The model focuses on the construction of the assessment model framework. Firstly, the analytic hierarchy process and the grey relational analysis are applied to measure the importance of each target in the region through four indicators of the target hazard, striking urgency, damage advantage and mission relevance, respectively. Secondly, based on the damage mechanism of shock wave and fragments to target, the corresponding damage model is established, and the damage grade of each target in the evaluated area is obtained according to the damage criteria and grading standard. Finally, the model obtains the overall damage grade of the target area by employing the fuzzy comprehensive evaluation method, with synthesizing the importance and the damage grade of each target. Through the verification of an example, it demonstrates the certain feasibility of the model and provides a certain basis and reference for the subsequent research.