一种非均匀采样的宽带雷达数字正交解调方法

数字正交解调是宽带雷达数字接收机的重要组成部分,灵活性和实时性是数字正交解调设计的关键问题。从二阶采样和多相滤波的原理出发,提出了基于非均匀采样的数字正交解调方法,给出了算法的实现结构,并通过仿真验证了算法的正确性。通过与低通滤波法、多相滤波法比较结果表明,基于非均匀采样的数字正交解调方法具有优化的实现结构和更好的实时性,可以用于宽带雷达数字接收机的设计。     

C2组织探索性分析框架设计研究

以验证组织优化设计方法为目的,将探索性分析思想引入组织优化设计研究,根据探索性分析的特点与组织优化设计方法验证的具体需要,对C2组织探索性分析的过程进行了研究,初步设计了面向C2组织的探索性分析框架并对其中的关键技术进行了分析。     

雷达侦察效能对防空兵群抗击效率的影响评估

从信息化条件下防空作战的实际需要出发,描述了搜索雷达与火控雷达的侦察效能对群抗击效率影响的基本特点,运用概率论和防空兵射击指挥理论,建立了防空兵群分散指挥和集中指挥时,搜索与火控雷达发现目标概率对群抗击效率影响的数学模型,结合实例计算分析了选择射击指挥方式时搜索雷达发现目标概率的临界值。     

舰载雷达零位标校新法

对目前现有舰载火控雷达零位标校的方法和技术做了简单概述,提出了一种基于差分GPS、CCD、激光经纬仪等技术相结合的零位标校新法,给出了系统硬件组成和算法原理,对系统误差影响因素做了分析。实践标明此系统可以有效的克服由于舰体的摆动而对测量精度的影响,并极大的改善了标校的灵活性与机动性。标校系统测量真值位置精度优于50 cm,相应真值角度精度优于0.05 mrad,满足舰载雷达标校精度要求。     

助推滑翔飞行器复合控制系统线性化小偏差运动方程推导与控制系统设计

助推滑翔技术是制导武器实现增加射程、提高机动突防能力的关键技术之一,对飞行器姿态控制有较高的要求,需要设计复合控制方式的姿态控制系统.针对采用空气舵与燃气舵联动控制的飞行器,建立了动力学模型,详细推导了完整的三通道线性化小偏差运动方程,结合典型弹道数据给出了动力系数图像,分析了助推滑翔弹道各飞行段中飞行器的稳定性,在此基础上选取再入段低空飞行特征点进行了姿控系统设计,仿真结果验证了线性化小偏差运动方程的正确性和控制系统的有效性,为进行此类飞行器的稳定性分析与姿态控制系统设计提供了有益的参考.     

Supply chain coordination with product line design and a revenue sharing scheme

Many manufacturers sell their products through retailers and share the revenue with those retailers. Given this phenomenon, we build a stylized model to investigate the role of revenue sharing schemes in supply chain coordination and product variety decisions. In our model, a monopolistic manufacturer serves two segments of consumers, which are distinguished by their willingness to pay for quality. In the scenario with exogenous revenue sharing ratios, when the potential gain from serving the low segment is substantial (e.g., the low‐segment consumers' willingness to pay is high enough or the low segment takes a large enough proportion of the market), the retailer is better off abandoning the revenue sharing scheme. Moreover, when the potential gain from serving the low (high) segment is substantial enough, the manufacturer finds it profitable to offer a single product. Furthermore, when revenue sharing ratios are endogenous, we divide our analysis into two cases, depending on the methods of cooperation. When revenue sharing ratios are negotiated at the very beginning, the decentralized supply chain causes further distortion. This suggests that the central premise of revenue sharing—the coordination of supply chains—may be undermined if supply chain parties meticulously bargain over it.     

大型相控阵雷达系统安全性综合评价

针对大型相控阵雷达系统安全性因素多、评价困难的特点,分析并建立了大型相控阵雷达系统安全评价指标体系。提出了一种基于改进模糊层次分析法、熵权法和拉格朗日算法确定综合权重的方法,并建立了雷达系统安全性模糊综合评价模型。以某型大型相控阵雷达系统的安全性评价为例,运用所提方法确定该雷达系统的安全性指标综合权重,并进行安全性综合评价。将该方法与传统AHP评价法进行对比分析,验证了该方法的科学性和合理性。     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于面积比矩阵的加权特征向量点匹配算法

提出一种在仿射变换下点集关系描述算子--面积比矩阵,证明了其在仿射变换群下的不变性质;并由该性质推导得出特征向量(EA)匹配算法抗噪性能差的原因,在此基础上给出了基于面积比矩阵的加权特征向量算法.算法构造不同图像的面积比矩阵,对矩阵进行分解得到其特征值和特征向量,通过特征值进行加权获得图像中点的特征向量,比较图像点的特征向量获取匹配关系.因面积比矩阵的仿射不变性质,算法能实现仿射变换下点集精确匹配;采用的加权特征向量法改进了EA匹配法,具有更好的抗噪性能.实验表明算法切实可行.     

基于学科间差异信息的协同优化改进算法

分析了MDO(Multidisciplinary Design Optimization)中广泛应用的协同优化算法的特点和存在的问题,提出了一种基于学科间差异信息的协同优化改进算法COMI(Collaborative Optimization based on Multidisciplinary Inconsistency).利用学科间差异信息构造了系统级松弛约束和系统级罚函数,利用遗传算法作为系统级优化算法,并采用标准算例比较了标准CO(Collaborative Optimization)算法、松弛CO算法与COMI算法的性能.结果表明COMI算法在设计结果可行性和最优值上平衡性较好.