概率分布模型的飞机战备完好率评估与预测

飞机战备完好率是军用飞机战斗力的重要体现.在分析目前部队常用的飞机战备完好率算法缺陷的基础上,建立了基于概率分布的飞机战备完好率计算模型,该模型体现了飞机任务可靠性、维修性与战备完好性之间的关系.以某型飞机为例,通过分析飞机任务可靠度,利用飞机可靠性、维修性、保障性及作战训练任务的历史统计数据,依据概率分布模型对飞机的...     

采用弹道修正技术的红外干扰弹性能优化

针对弹道修正弹的高维非线性特性导致的性能优化难题,改变概念设计阶段传统的串行设计方式,提出了一种基于实验设计(Design Of Experiments,DOE)和响应面(Response Surface Methodology,RSM)的智能优化算法,定义基本的弹丸结构模型以及相关的设计参数.在DOE的基础上,将设计...     

探空火箭级间段的CAD系统

本文在CADKEY绘图软件包的支持下,开发了加筋圆柱结构CAD系统—Hcadx.此系统通过菜单引导用户的操作,可用经验公式或解析法作轴压稳定分析,用罚函数法优化参数,可以在不退出Hcadx的情况下启动CADKEY,自动绘制设计草图。此草图经过适当地编辑、修改、便可成为工程中能接受的工作图纸。     

Equity in genetic newborn screening

State‐level newborn screening allows for early treatment of genetic disorders, which can substantially improve health outcomes for newborns. As the cost of genetic testing decreases, it is becoming an essential part of newborn screening. A genetic disorder can be caused by many mutation variants; therefore, an important decision is to determine which variants to search for (ie, the panel design), under a testing budget. The frequency of variants that cause a disorder and the incidence of the disorder vary by racial/ethnic group. Consequently, it is important to consider equity issues in panel design, so as to reduce disparities among different groups. We study the panel design problem using cystic fibrosis (CF) as a model disorder, considering the trade‐offs between equity and accuracy, under a limited budget. Most states use a genetic test in their CF screening protocol, but panel designs vary, and, due to cost, no state's panel includes all CF‐causing variants. We develop models that design equitable genetic testing panels, and compare them with panels that maximize sensitivity in the general population. Our case study, based on realistic CF data, highlights the value of equitable panels and provides important insight for newborn screening practices.     

高空气球外形计算及通用算法设计

高空气球为临近空间中的研究提供了可靠的低成本平台。目前高空气球球形一般直接采用"自然形"或以"自然形"为基础,但通用、简捷地求解"自然形"外形方程一直是个难点。将"自然形"气球外形求解问题转化为最优控制问题,利用最优控制领域成熟的求解工具——高斯伪谱法最优化软件包计算气球外形。此外,通过分析外形数据得到外形变化规律,设计通用算法求解任意球形控制因子、任意高度的"自然形"气球外形。结果显示,该算法无须调参便可计算所需的"自然形"球形,便于科研人员快速获得大量所需     

重力势能锁止型外骨骼设计及其效能评价

现存的被动式外骨骼存在助力效果不明显等缺陷。基于人体步态特征,提出了将人体行走过程中的重力势能转化为人体抬腿过程中动能的原理,通过弹簧、曲柄滑块机构、棘轮棘爪机构以及链传动机构的组合,设计了一款被动式下肢机械外骨骼,并通过外骨骼动力学分析和生理消耗指数实验测试的方法进行了外骨骼性能评价。动力学分析结果表明,穿戴外骨骼后髋关节峰力矩总量降低了23.43%,髋关节做功总量降低了30.59%,初步验证了外骨骼的有效性。生理消耗指数实验测试结果表明, 穿戴外骨骼对于短距离动作转换未产生显著效果,但在长距离行走和上坡行走中分别降低了8.1%和10.4%的能量消耗。因此,该下肢外骨骼助力性能得到了验证,为相关领域的研究提供了实例化参考。     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

This work provides a method to predict the three-dimensional equivalent elastic properties of the filament-wound composites based on the multi-scale homogenization principle.In the meso-scale,a representative volume element(RVE)is defined and the bridging model is adopted to establish a theoretical predictive model for its three-dimensional equivalent elastic constants.The results obtained through this method for the previous experimental model are compared with the ones gained respec-tively by experiments and classical laminate theory to verify the reliability of this model.In addition,the effects of some winding parameters,such as winding angle,on the equivalent elastic behavior of the filament-wound composites are analyzed.The rules gained can provide a theoretical reference for the optimum design of filament-wound composites.     

基于程序设计类课程的教育技术本科生创新思维培养研究与实践

本文基于ATDE创新教育理论,以程序设计类课程为教学阵地,对教育技术本科生创新思维培养做出了相关探索与实践。创新思维是高级的问题解决活动。培养学生的创新思维更多体现在对学生解决问题的策略应用方面。对此,本文通过给出的案例,从不同角度详细介绍了程序设计类课程对培养教育技术本科生创新思维的实施对策,以期对提高本专业建设做出有益的探索。     

装备保障信息分类与代码设计研究

根据装备保障信息化建设的需要,分析了装备保障信息的特点,探讨了信息分类的要求并提出了装备保障信息分类方法;阐述了装备保障信息代码设计的要求、分类、形式．提出了代码设计方法。