基于遗传算法的整周模糊度OTF解算

建立了一种基于简单遗传算法的改进模糊度搜索方法。首先采用一组约束方程求解模糊度浮点数解 ,然后UDUT 和LDLT 分解对整周模糊度进行整数高斯变换以降低各整周模糊度之间的相关性 ,最后利用遗传算法进行整周模糊度搜索。在种群个体较少的情况下 ,为了避免早熟使搜索陷入局部最优 ,提出两种变异算子 ,保持个体的多样性。仿真结果表明改进后的算法能够实时动态解算整周模糊度 ,且较使用简单遗传算法具有更快的搜索速度和鲁棒性。     

数字化部队战斗力优化组合模型

数字化部队在战场上的出现,是信息战争产生的重要标志之一.随着信息技术的兴起,一些西方国家组建了数字化部队并加深了对其编成和结构理论的研究.首先介绍了模块理论,通过对数字化部队战斗力原理的分析,讨论了数字化部(分)队战斗力构成要素.在此基础上,使用线性规划理论试探性的构建出数字化部(分)队战斗力模块组合模型,并对模型的不同组合方式进行了论证和分析,得出数字化部(分)队战斗力模块的一种优化组合.最后展望了本课题下一步工作的研究重点.     

助推-滑翔式导弹中段弹道方案的初步分析

建立了助推—滑翔式弹道中段的无量纲运动方程。采用非线性规划方法实现弹道优化。首先求解不同初始速度、速度倾角和最大升阻比的最大射程弹道,然后考虑驻点热流、过载约束,求解总气动加热最小和射程最大的最优弹道。基于前者的计算结果分析了初始条件对最大射程弹道的影响。将考虑约束的再入滑翔弹道与弹道式再入的特征参数比较,表明再入滑翔弹道的峰值热流较小,而总气动加热增加,但再入滑翔飞行时间在一般锥形体再入机动飞行器的热防护系统可承受的时间范围内。     

基于有限元-刚体混合模型的运载火箭缓释放特性分析

以一种新提出的新型强制式牵制释放系统为例,建立了分析运载火箭缓释放过程中缓释特性的有限元—刚体混合模型。采用刚体模型计算运载火箭的运动,利用有限元方法计算缓释销的弹塑性大变形接触过程,缓释机构和运载火箭的界面满足力和位移的协调条件。该混合模型采用增量方法进行求解,其可用来分析缓释机构的不同材料、几何形状、尺寸以及摩擦条件对运载火箭的完全释放时间、释放时刻速度以及缓释机构消耗功等参数的影响。     

分布式流体系结构及其编程模型与资源管理

利用互联网资源提供大数据计算服务面临着资源异构性、动态性与通信长延迟等方面的挑战,现有分布式计算模型仍存在一些不足。运用流计算模型提出分布式流体系结构,包括分布式流编程模型与资源管理等,能够高效支持多种并行执行模式。在10个CPU-GPU异构结点上实现了原型系统,仿真实验验证了7个不同的测试用例。实验结果表明,与本地串行计算相比,分布式流体系结构可以平均提高39倍计算性能,具有较大的应用潜力。     

电力市场环境下发电厂机组检修计划

分析了传统的统一调度下和电力市场环境下发电厂机组检修计划的不同,在此基础上提出不同于以往的检修计划方法。以检修费用、电价收益损失和违约金之和最小为目标函数,然后采用0-1整数规划的直接枚举法求解。最后通过算例论证了该方法的可行性。     

Scheduling maintenance and semiresumable jobs on a single machine

The majority of scheduling literature assumes that the machines are available at all times. In this paper, we study single machine scheduling problems where the machine maintenance must be performed within certain intervals and hence the machine is not available during the maintenance periods. We also assume that if a job is not processed to completion before the machine is stopped for maintenance, an additional setup is necessary when the processing is resumed. Our purpose is to schedule the maintenance and jobs to minimize some performance measures. The objective functions that we consider are minimizing the total weighted job completion times and minimizing the maximum lateness. In both cases, maintenance must be performed within a fixed period T, and the time for the maintenance is a decision variable. In this paper, we study two scenarios concerning the planning horizon. First, we show that, when the planning horizon is long in relation to T, the problem with either objective function is NP-complete, and we present pseudopolynomial time dynamic programming algorithms for both objective functions. In the second scenario, the planning horizon is short in relation to T. However, part of the period T may have elapsed before we schedule any jobs in this planning horizon, and the remaining time before the maintenance is shorter than the current planning horizon. Hence we must schedule one maintenance in this planning horizon. We show that the problem of minimizing the total weighted completion times in this scenario is NP-complete, while the shortest processing time (SPT) rule and the earliest due date (EDD) rule are optimal for the total completion time problem and the maximum lateness problem respectively. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 845–863, 1999     

A comparative study of three tool replacement/operation sequencing strategies in a flexible manufacturing system

This paper studies three tool replacement/operation sequencing strategies for a flexible manufacturing system over a finite time horizon: (1) failure replacement—replace the tool only upon failure, (2) optimal preventive tool replacement for a fixed sequence of operations, and (3) joint scheduling of the optimal preventive tool replacement times and the optimal sequence of operations. Stochastic dynamic decision models are used for strategies 2 and 3. The optimization criterion for strategies 2 and 3 is the minimization of the total expected cost over the finite time horizon. We will show through numerical studies that, with the same amount of information, the total expected costs can be reduced considerably by choosing an optimal strategy. Our conclusion is that in flexible manufacturing, optimal tool replacement and optimal operations sequencing are not separate issues. They should be considered jointly to minimize the expected total cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 479–499, 2000     

对潜搜索的灰色整数规划模型

在对潜搜索中,针对搜索兵力武器装备战技性能的优劣、指挥人员的军政素质的高低、水文气象条件的好坏等因素均会随着时间的推移而发生变化的特点,为了取得最佳的搜潜效果,需要根据时间变化给不同的作战单元分派不同的作战任务.将整数规划与灰色模型相结合,建立了对潜搜索的灰色整数规划模型,给出了检验方法和求解步骤,并举例分析说明.经验证,该模型精度等级较高,且能使各作战单元的搜索效率达到最佳,因此,可资对潜搜索兵力分配时借鉴.     

弹炮混编防空群兵力分配模型

针对对付现代日益发展的空袭手段的一种有效方法--弹炮混编防空布势中存在的防空武器种类繁多,兵力分配复杂,难以充分发挥各自效能的问题,建立了非线性规划模型,利用动态规划对该模型进行分析,运用拉格朗日降维法进行降维,将三维降为二维.经防空作战的实例验证该算法不但能将两维降到单维,而且还可以将多维降到单维,能节省计算机的内存使用率,提高仿真计算的速度,符合信息化条件下指挥决策实时化的要求且分配效果较好.