水雾扩散模型仿真

建立水雾红外衰减模型时,通常把水雾空间看作单一均匀整体处理,然而雾滴的扩散现象使水雾的雾滴密度无法保证处处相等,所以仿真结果与实际情况相比普遍存在较大偏差。针对这一问题,基于高斯扩散理论与Mie散射理论,提出了一种新的建模方案。通过将水雾空间划分为多个子空间,并计算每个子空间内水雾消光性能的建模方法,提高建模的准确性。同时结合红外制导导弹来袭的方向变化,计算出不同方向上的水雾消光性能。从仿真结果可以看出,这种建模方式能够很好地克服以往建模方法的缺陷,为探索水雾的精确建模提供了一种新思路。     

Numerical simulation of the natural fragmentation of explosively loaded thick walled cylinders

The ability to predict the natural fragmentation of an explosively loaded metal casing would represent a significant achievement. Physically-based material models permit the use of small scale laboratory tests to characterise and validate their parameters. The model can then be directly employed to understand and design the system of interest and identify the experiments required for validation of the predictions across a wide area of the performance space. This is fundamentally different to the use of phenomenologically based material algorithms which require a much wider range of characterisation and validation tests to be able to predict a reduced area of the performance space. Eulerians numerical simulation methods are used to describe the fragmentation of thick walled EN24 steel cylinders filled with PBXN-109 explosive. The methodology to characterise the constitutive response of the material using the physically based Armstrong–Zerilli constitutive model and the Goldthorpe path dependent fracture model is described, and the results are presented. The ability of an Eulerian hydrocode to describe the fragmentation process and reproduce the experimentally observed fragment mass and velocity distributions is presented and discussed. Finally the suitability of the current experimental analysis methodology for simulation validation is addressed.     

Neural network modeling to evaluate the dynamic flow stress of high strength armor steels under high strain rate compression

An artificial neural network (ANN) constitutive model is developed for high strength armor steel tempered at 500 °C, 600 °C and 650 °C based on high strain rate data generated from split Hopkinson pressure bar (SHPB) experiments. A new neural network configuration consisting of both training and validation is effectively employed to predict flow stress. Tempering temperature, strain rate and strain are considered as inputs, whereas flow stress is taken as output of the neural network. A comparative study on Johnson–Cook (J–C) model and neural network model is performed. It was observed that the developed neural network model could predict flow stress under various strain rates and tempering temperatures. The experimental stress–strain data obtained from high strain rate compression tests using SHPB, over a range of tempering temperatures (500–650 °C), strains (0.05–0.2) and strain rates (1000–5500/s) are employed to formulate J–C model to predict the high strain rate deformation behavior of high strength armor steels. The J-C model and the back-propagation ANN model were developed to predict the high strain rate deformation behavior of high strength armor steel and their predictability is evaluated in terms of correlation coefficient (R) and average absolute relative error (AARE). R and AARE for the J–C model are found to be 0.7461 and 27.624%, respectively, while R and AARE for the ANN model are 0.9995 and 2.58%, respectively. It was observed that the predictions by ANN model are in consistence with the experimental data for all tempering temperatures.     

云模型在雷达干扰资源多目标优化配置中的应用

鉴于干扰效果/效益评估在雷达干扰资源优化分配中的重要地位,提出了一种基于云模型和匈牙利算法的雷达干扰资源优化分配模型。利用一维云模型单条件单规则发生器和逆向云发生器构建了评估指标干扰效果推理器,利用基于风险态度因子的云模型映射函数定义了云模型之间距离的度量方法。提出了一种基于云模型与逼近理想解法的雷达干扰效益矩阵求解方法,最后运用匈牙利算法实现了干扰资源优化分配。将所建模型应用到干扰资源分配中,结果表明该模型能够较好的处理评估中的不确定性知识,是合理、可行的。     

基于粒子群优化的观测站部署算法

针对红外观测站部署问题,在研究观测站位置对定位精度影响的基础上,提出了基于粒子群优化的观测站部署算法。首先对ECEF坐标系下的CRLB矩阵进行推导;然后将观测站优化部署问题抽象为非线性规划模型,并将红外传感器联合定位的CRLB作为目标函数;最后采用粒子群优化算法求解该模型,避免了传统的非线性规划算法需要求解目标函数梯度的难题。结果表明,本文的部署算法具有一定的理论依据和工程意义;可以为实际红外观测站的静态部署和动态部署提供参考。     

基于SWOT分析的警卫情报工作优化研究

当前,警卫情报工作的范围已经扩展到警卫实战、预警、决策、管理等各个方面,但从总体上看,警卫情报工作仍需进一步优化,以满足日益增长的警卫实践需求。针对警卫情报工作的特点,采用SWOT分析法对警卫情报工作的内外部条件进行客观分析,提出针对性的优化策略,以提升警卫情报工作能力。     

瞄准式战斗部瞄准策略研究

对不同的瞄准点,瞄准式战斗部对目标毁伤效果不同,为此提出了适用于瞄准式战斗部的瞄准策略,保证了对目标较高的毁伤概率和较好的毁伤效果,解决了起爆之前战斗部的定位问题。     

基于概率图模型的海上多目标跟踪

针对海上复杂环境中多运动目标跟踪问题,提出了一种融合概率图模型和粒子滤波的跟踪方法.该方法采用二元马尔可夫随机场构建多目标模型,利用势函数表示其联合概率分布,最后用变差分法和粒子滤波推理后验概率密度.通过二阶回归模型准确构建状态转移方程,以及Mean-Shift迭代加速粒子采样,提高了算法精确度和运行效率.实验表明:该方法能很好地实现海上复杂环境中的多目标实时跟踪.     

考虑地磁场空间梯度的飞行器磁干扰建模与求解方法

首先,在研究飞行器背景磁干扰模型与小信号模型的基础上,分析了地磁梯度沿纬度与高度的变化规律,分析可知由于飞行器的机动,地磁梯度会对测量结果造成影响;然后,考虑地磁梯度因素,对原有小信号模型求解方法进行了改进：飞行器在四个航向上做小角度的机动飞行,将地磁场沿纬度与高度的梯度作为未知量,与飞行器磁干扰模型中的剩磁参数、感磁参数和涡磁参数一起求解;最后,利用实测试验数据进行了验证,结果表明：考虑地磁梯度的影响与不考虑地磁梯度的影响相比,求解的模型参数可以在细节上进一步提高飞行器背景磁干扰的补偿效果。     

微槽结构单点金刚石飞切加工的切削力建模

超精密单点金刚石飞刀切削技术是一种比较新颖的微槽类结构加工方式。在飞切过程中,切削力是切削过程中重要的物理量,对加工后的表面质量、刀具磨损等有着直接影响。提出了一种基于直角微切削理论的动态微槽类结构飞切的力学模型,基于微切削理论,得到了前、后刀面切削力的理论模型。根据飞切的几何运动特征,建立了飞切过程中剪切角的计算模型,并根据单圈飞切实验得到了飞切过程中剪切面的变化规律。为了验证模型的正确性,采用不同切削参数进行了多圈重叠飞切实验,对切削力进行了测量和分析。实验得到的切削力大小和变化规律与理论模型计算得到的基本一致,证明了该切削力模型的有效性。