反舰导弹纯方位发射捕捉概率计算方法

反舰导弹的纯方位发射对目标信息要求不高,在目标信息的探测越来越艰难的今天,是反舰导弹较为重要的一种发射方式,也将会成为未来海战场上常用的作战方式.介绍了反舰导弹捕捉概率的计算方法和传统纯方位发射的捕捉概率的计算方法,并从分析反舰导弹捕捉概率的计算模型和影响因素出发,指出传统的反舰导弹纯方位发射的捕捉概率计算模型存在不足,并给出了修正后的计算模型.     

一种无人战斗机系统使用保障费用分析方法

基于无人战斗机系统在使用保障上的特点,通过对有人战斗机使用保障费用模型进行合理改造,使其能适用于无人战斗机的使用保障费用分析。经过改造的模型具有结构清晰、概念明确的特点。适合在飞机总体设计阶段用于全寿命周期的费用估算以及飞机的费效分析和综合优化设计。通过与有人战斗机的使用保障费用进行对比计算表明,无人战斗机系统的使用保障费用具有明显的经济优势。     

动态飞行仿真中人体六自由度模型研究

应用多体系动力学方法,结合飞行力学,给出了动态飞行仿真中飞行员的六自由度数学模型,并将其应用在动态飞行仿真建模中,分析结果表明这种数学模型是可行的。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.     

A model for step‐stress accelerated life testing

Modern technology is producing high reliability products. Life testing for such products under normal use condition takes a lot of time to obtain a reasonable number of failures. In this situation a step‐stress procedure is preferred for accelerated life testing. In this paper we assume a Weibull and Lognormal model whose scale parameter depends upon the present level as well as the age at the entry in the present stress level. On the basis of that we propose a parametric model to the life distribution for step‐stress testing and suggest a suitable design to estimate the parameters involved in the model. A simulation study has been done by the proposed model based on maximum likelihood estimation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

空空导弹三维导引模型和机动目标导引规律研究

给出了三维空间导弹-目标追逃运动的空间矢量方程,在三维空间建立了导弹-目标的追逃运动模型。在目标运动信息完全未知条件下对变速机动目标应用李雅普诺夫稳定性分析方法提出了一种非线性三维制导算法,这种方法在导引末段不需要过大的加速度命令,不需要知道目标精确的加速度和速度方位信息。全弹道六自由度数学仿真结果表明了模型的正确性和制导算法的有效性。     

一种基于当前统计模型的模糊交互多模型算法

研究了模糊交互多模型算法(FIMM)和基于当前统计模型(CS)的自适应滤波算法,提出了一种基于当前统计模型的模糊交互多模型算法(CSFIMM)。该算法克服了模糊交互多模型算法精度较低和当前统计模型自适应滤波器方差调整有限的缺点。通过仿真,对所提出的算法和交互多模型(IMM)算法以及FIMM算法在估计精度和计算量两个方面进行了比较。     

微分对策界栅理论在舰艇作战能力评估中的应用

作战能力是表征战斗舰艇战术技术性能的一项重要指标,如何正确评价舰艇的作战能力一直是军事运筹研究的热点.利用定性微分对策的界栅理论研究了一类作战问题,通过构造捕获区面积和咽喉区域面积,并以此作为动态评估舰艇作战能力的衡量指标.研究结果可为综合评价舰艇作战能力提供一条新途径.     

常规攻击下的水面舰艇生存能力评定

分析了常规作战对水面舰艇攻击的3种模式,给出了各攻击模式及水面舰艇生存能力综合评定的解析和模拟模型.并用其对国外某型导弹驱逐舰生存能力进行了定量评估,结合定性分析得出了有益的结果.