PMI泡沫夹层结构雷达天线罩间接热-结构耦合分析与实验研究

机载PMI泡沫夹层结构雷达天线罩在环境温度变化时将产生表面变形现象并影响其使用性能,但对天线罩热变形结果进行实时检测分析具有一定难度。通过ANSYS间接热-结构耦合法建立了分析模型,对天线罩进行了计算分析,采用热膨胀片状模型进行了理论分析,在此基础上,设计并开展了温度冲击实验研究。结果表明, PMI夹层结构天线罩的热-结构耦合变形综合应变趋势是棱边处膨胀程度最大,由边缘至天线罩透波面中心处,膨胀程度逐渐减小;间接热-结构耦合计算应变值与实测应变值之间平均相差35.08%,间接热-结构耦合分析方法与模型具有一定的可信性。     

Robust shortest path planning and semicontractive dynamic programming

In this article, we consider shortest path problems in a directed graph where the transitions between nodes are subject to uncertainty. We use a minimax formulation, where the objective is to guarantee that a special destination state is reached with a minimum cost path under the worst possible instance of the uncertainty. Problems of this type arise, among others, in planning and pursuit‐evasion contexts, and in model predictive control. Our analysis makes use of the recently developed theory of abstract semicontractive dynamic programming models. We investigate questions of existence and uniqueness of solution of the optimality equation, existence of optimal paths, and the validity of various algorithms patterned after the classical methods of value and policy iteration, as well as a Dijkstra‐like algorithm for problems with nonnegative arc lengths.© 2016 Wiley Periodicals, Inc. Naval Research Logistics 66:15–37, 2019     

Stage life testing

In progressive censoring, items are removed at certain times during the life test. Commonly, it is assumed that the removed items are used for further testing. In order to take into account information about these additional testing in inferential procedures, we propose a two‐step model of stage life testing with one fixed stage‐change time which incorporates information about both the removed items (further tested under different conditions) and those remaining in the current life test. We show that some marginal distributions in our model correspond either to progressive censoring with a fixed censoring time or to a simple‐step stress model. Furthermore, assuming a cumulative exposure model, we establish exact inferential results for the distribution parameters when the lifetimes are exponentially distributed. An extension to Weibull distributed lifetimes is also discussed.     

Pairwise model discrimination with applications in lifetime distributions and degradation processes

Reliability data obtained from life tests and degradation tests have been extensively used for purposes such as estimating product reliability and predicting warranty costs. When there is more than one candidate model, an important task is to discriminate between the models. In the literature, the model discrimination was often treated as a hypothesis test and a pairwise model discrimination procedure was carried out. Because the null distribution of the test statistic is unavailable in most cases, the large sample approximation and the bootstrap were frequently used to find the acceptance region of the test. Although these two methods are asymptotically accurate, their performance in terms of size and power is not satisfactory in small sample size. To enhance the small‐sample performance, we propose a new method to approximate the null distribution, which builds on the idea of generalized pivots. Conventionally, the generalized pivots were often used for interval estimation of a certain parameter or function of parameters in presence of nuisance parameters. In this study, we further extend the idea of generalized pivots to find the acceptance region of the model discrimination test. Through extensive simulations, we show that the proposed method performs better than the existing methods in discriminating between two lifetime distributions or two degradation models over a wide range of sample sizes. Two real examples are used to illustrate the proposed methods.     

箭(弹)级间螺栓法兰连接结构冲击失效实验与数值仿真

基于火箭(导弹)级间螺栓法兰连接结构,简化设计并制作了一组原理性实验件,利用ABAQUS软件建立有限元模型,设计并进行了多次落锤冲击失效实验,其中包括轴向和横向两种工况,考虑了螺栓均布与非均布、螺栓直径和螺栓-栓孔间隙等不同结构特点。实验过程中采集了螺栓力时程响应数据、柱段关键点应变时程响应数据、锤头冲击力和冲击速度及连接界面开缝位移等多组数据。根据实验效果和实测数据,分析了连接结构冲击失效机理,并对比验证发现有限元模型数值模拟效果和精度与实验结果吻合较好。研究结论可为箭(弹)级间连接结构抗冲击设计提供参考。     

船舶降噪工程技术集成优化方法

在用船舶降噪工程受总体约束强、声学异常多等因素影响,传统新船建造的声学设计方法不能被直接应用。为此,提出了在用船舶降噪工程技术集成优化方法。根据需求设计顶层降噪指标,并通过四项标准进行检验;基于改装前测试数据和降噪技术储备情况,制定初步降噪技术集成方案;通过声学评估迭代,形成优化的指标分配体系和最终的降噪技术集成方案。模型试验验证结果表明,该方法能够有效实现在用船舶降噪工程的技术优化集成。     

反电动势对无扰载荷航天器精确定向的影响

无扰载荷航天器中非接触式作动器反电动势会引起有效载荷模块与支持模块之间的耦合,影响有效载荷模块的精确定向性能。通过建立无扰载荷航天器的耦合动力学模型,分析非接触式作动器反电动势对有效载荷模块精确定向性能的影响。考虑六支杆立方构型无扰载荷接口,结合拉格朗日方程和牛顿欧拉方法建立有效载荷模块平台动力学模型。推导非接触式作动器的输出力模型,并引入有效载荷模块平台动力学模型,给出考虑非接触式作动器反电动势的耦合动力学模型。将支持模块上飞轮动静不平衡引起的谐振作为干扰力矩,建立了无扰载荷航天器在轨定向状态的Simulink仿真模型。仿真结果表明,反电动势系数越大,干扰力矩对有效载荷模块的影响越大,有效载荷模块精确定向精度越低。     

基于扩展标记变迁模型的时钟同步协议正确性验证

时钟同步协议是时间触发网络的一个重要组成部分,是时间触发网络实时性和确定性的关键。本文基于扩展标记变迁模型对时钟同步协议进行建模,基于模型检测方法对协议是否满足正确性属性进行验证。验证结果证明了在不同启动场景下时钟同步网络协议的正确性,也表明了扩展标记变迁模型对于协议验证的有效性。     

某型导发架通用测试系统软件复用性设计

测试软件的复用性是摆在测试界面前亟待解决的重要问题。运用统一建模语言(Unified Modeling Language,UML)对测试软件进行建模,包括:测试系统的类图、软件功能分解、功能子系统的上下文模型、测试软件需求特征树以及软件功能子系统的顺序交互视图。在Visual C++6.0环境中,采用"应用程序框架+可复用构件"开发方式,实现了基于可复用构件的某型导发架测试系统应用软件组装,成功解决了导发架测试领域内同一系列产品间测试软件的可复用问题。     

复杂系统的MTTR建模研究

现代武器系统的结构越来越复杂,在进行系统修复前,系统往往发生多个故障的情况,致使原来的维修性模型不能完全地反映系统的维修性水平。针对多重故障的维修,推导出一种能反映这种情况下的维修性预计的平均修复时间(MTTR)数学模型。模型中的一次维修事件由原来的只进行单一故障维修扩展到可以对多个不同故障进行维修的情况,更好地反映了复杂系统的实际维修情况。通过实例验证了该模型能实际地反映出复杂系统的维修性情况,从而更加准确地预计出系统的维修性水平。