伞衣优化设计对群伞系统气动特性的影响分析

随着载人航天、深空探测等航天任务的蓬勃发展,航天器回收载荷质量大幅提高,以单具降落伞为功能核心的传统减速系统已不能满足大质量回收载荷日益提高的迫切要求,发展群伞减速着陆系统是实现大载重航天器高效减速和无损着陆要求的发展方向。本文采用数值模拟手段对群伞系统的气动特性开展仿真研究,结合环帆伞构型优化设计,分析了多种构型下群伞系统的气动特性。通过对仿真结果进行流场分析和数据对比发现,开窗/开缝设计既能够确保群伞系统具有良好的阻力特性,又能够维持群伞系统的工作稳定性,避免单伞之间由于受力而发生碰撞现象。采用数值仿真手段不仅可以提高降落伞研制效率,降低研发成本,也为设计人员掌握群伞系统的工作原理、促进降落伞设计理论发展提供了有力保证。     

基于作业记账日志的并行作业特征分析工具 JobCAT

并行作业特征分析是负载分析的重要基础。作业记账日志是开展作业特征分析的重要数据源。由于作业记账日志中没有记录应用名称,现有工具无法按应用名称开展作业特征分析。提出基于关键字模糊匹配的作业记账日志标记方法,设计通用的作业数据模型和柔性可扩展软件架构,集成实现并行作业特征分析工具JobCAT。通过某超级计算机系统百万量级作业记账日志数据测试验证,JobCAT的作业记账日志标记率大于95%。JobCAT支持7个插件、29项统计报表,可一键生成应用的作业特征分析报告,对负载分析研究具有实用价值。     

Analysis of the effect of bore centerline on projectile exit conditions in small arms

Most finite element models of small arms focus on an idealized barrel, typically one with a perfectly straight bore centerline. Using five different experimentally measured bore centerlines, this investigation analyzes the effect centerline nonlinearity has on projectile exit conditions. This includes the effect of rotating a centerline through several orientations. Modeled using Abaqus/Explicit, this dynamic analysis simulates a single firing cycle for each centerline. Projectile jump is calculated for each model as a measure of the effects of warped centerlines. The warped centerlines have a small effect on barrel dynamics.     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.     

小学语文课外阅读中协同知识建构的特征研究

小学阶段是培养学生阅读兴趣的重要阶段,这一阶段应该以多种形式开展课外阅读以培养学生的阅读素养。知识建构在培养学生语言能力、审美、鉴赏、创造思维、文化传承与理解方面发挥着重要的作用,在小学语文课外阅读中有广泛的应用空间。研究以小学五年级所开展的课外阅读为例,对学生在课外阅读中协同知识建构过程进行了分析,发现课外阅读过程中的协同知识建构具有过程性、自发性、可持续发展性的特征,对培养学生的口语表达能力、审美能力、创作能力和人际交往能力有积极的作用。     

A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

Terrorism research: should we focus on the opponent or on our own people?

In terrorism research, three different sources of information and data exist: the terrorists and their environment; the incidents; and the population. This article discusses the strengths and weaknesses of research that is concerned with, or relies on, any of the mentioned sources. An in-depth understanding of the methodological issues that come with these sources is important to correctly interpret results from scientific studies. It is highlighted how the different scientific approaches add to a holistic view of terrorism as a phenomenon. Furthermore, the double-edged sword of information in the field of terrorism is discussed. From these deliberations, guidance concerning the future work of both scholars and decision-makers can be deducted.     

基于专利情报分析的Cubic公司MILES激光交战系统研究

在阐述了国内对实兵交战系统需求现状的基础上,文章提出了研究MILES系统的意义,利用Cubic公司的MILES系统专利进行定量分析和定性分析,在此基础上得出结论。MILES系统是成熟的实兵交战系统,其专利价值高,技术领域分布广,模拟效果佳,可以有效帮助部队提升实际作战能力,其专利技术很有借鉴价值。此结果可以用于帮助我国的实兵交战系统技术领域的研究和发展。最后提出一些关于学习MILES系统的建议。     

靶标系统集控软件设计

为提高靶场现有靶标设备的综合利用效率,解决战术射击训练时大量不同型号靶标混合使用中的集中控制问题,采用软件集成方式,设计开发一种模块化、通讯协议自适应的集控系统软件,通过基于XML的协议解析模板,动态匹配不同通讯协议的靶标设备,解决多型设备集成应用问题。实际应用结果表明,该系统有效提升了靶场现有设备的利用效率,同时也为靶场其他应用系统的综合集成提供了很好的实现途径。