国有军工集团生产与创新双效率研究

文章利用DEA方法对2015-2016年我国国有军工集团的生产效率和创新效率进行了分析,结果发现:我国国有军工集团的生产效率在近两年整体上有所提升,受行业影响小于自身因素影响,受管理、技术等水平的影响与来自规模因素的影响相差不大;创新效率在近两年整体上有所下降,受行业影响与自身因素影响均较大,无效率主要来自创新管理水平或技术条件的不足;生产效率与创新效率呈现统计上不显著的正相关关系。在此基础上,提出了军工集团实施国企改革的几点建议,以供有关方面参考。     

舰炮系统的分布式交互仿真概述

论述了舰炮系统的分布式交互仿真 (DIS) ,建立了舰炮系统DIS模型并简述了各仿真模块的功能     

某型指控系统鱼雷发射参数装定数字随动系统分析

针对某型指控系统鱼雷发射参数装定数字随动系统的独特性和部队装备保障工作的需要,对其控制原理进行分析.从顺序操作式数字随动系统的结构和工作特点入手,研究了其巴克码和格雷码相结合的编码方式、 PWM直流电机调速过程、循环查询和程序查询两种查询方式以及对随动系统整个工作过程的校验.分析表明该数字随动系统的参数设定具有较高的准确性、跟踪精度和响应速度,能较好地满足鱼雷攻击作战中的设定准备要求.     

基于排队论的舰空导弹武器系统反导射击效能模型

舰空导弹是当前海上防空的主要装备。因此,评估舰空导弹武器系统的射击效能,使舰空导弹击毁目标概率达到最大化,是防御中所要考虑的核心问题。运用了排队论的方法,建立了在目标单方向和多方向等情况下的射击效能模型,并通过统计运算得到了某型舰空导弹武器系统在各种条件下相对全面的射击效能数据,解决了各型舰空导弹武器系统射击效能评估的问题,对舰空导弹武器系统的作战使用有一定的参考价值。     

近地卫星Ka频段数传链路抗雨衰ACM模式设计

针对近地卫星数传时的信道时变性和严重的Ka频段雨衰现象,采用自适应编码调制（ACM）技术能够充分利用链路资源,相对于传统的固定编码调制方式,进一步提高了链路的数据吞吐量。提出了近地卫星Ka频段数传链路ACM模式设计方法,在降雨环境下建立Ka频段数传链路模型,根据信道状况确定ACM选用模式;采用基于导频符号的最大似然信噪比估计算法结合移动平均的平滑方法实现信道估计,有效地减小了估计值的波动。仿真结果表明,无论晴天还是雨天,采用提出的卫星数传链路ACM模式设计方法,能够在保证系统可靠性的同时获取较高的数据吞吐量。     

A high performance waveform and a new ranging method for the proximity detector

Signal modulation is an essential design factor for proximity detectors and directly affects the system’s potential performance. In order to achieve the advantages of chaotic codes bi-phase modulation (CCBPM) and linear frequency modulation (LFM) simultaneously, this paper designed a waveform which combined chaotic codes bi-phase modulation and linear frequency modulation (CCBPM–LFM) for proximity detectors. The CCBPM–LFM waveform was analyzed in the aspect of time delay resolution (TDR) and Doppler tolerance (DT) based on ambiguity function (AF). Then, a ranging method, which we called instant correlation harmonic demodulation (ICHD), was presented for the detector using the CCBPM–LFM waveform. By combining time domain instant correlation with harmonic demodulation, the ICHD solved the problem caused by combination modulation and made the most of the linear frequency modulation (LFM) harmonics and the correlation of chaotic codes. Finally, a prototype was implemented and ranging experiments were carried out. From the theoretical analysis and experimental results, the proximity detector used the CCBPM–LFM waveform has an outstanding detection performance.     

Liquid phase in-situ synthesis of LiF coated boron powder composite and performance study

Among practical metal additives, boron (B) has a high volumetric heating value, making it a promising choice as a fuel additive. Although B can theoretically yield a large amount of energy upon complete combustion, its combustion is retarded by the initial presence of B oxide, which coats the surfaces of B particle. To improve the ignition and combustion properties of B powder, LiOH and NH₄F were used as precursors to synthesize uniformly LiF-coated B composites (LiF-B) in situ. The LiF-B mixture was also prepared for comparison using a physical method. X-ray diffraction (XRD), Fourier-transform infrared (FTIR), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used to characterize the morphologies and compositions of the products. The thermal and combustion properties of the samples were characterized by thermal gravity-differential thermal gravity (TG-DTG), differential scanning calorimetry (DSC) and closed bomb experiment. The XRD, FTIR, SEM and EDS results demonstrated the successful preparation of the coated LiF-B sample. The TG-DTG and closed bomb experiment results indicated that the addition of LiF decreased the ignition temperature of B powder, and increasing its reaction efficiency. DSC results show that when LiF-B was added, the released heat of underwater explosive increased by 6727.2, 7280.4 and 3109.6 J/g at heating rates of 5, 10, and 15 °C/min, respectively. Moreover, LiF-B decreased the activation energy of secondary combustion reaction of explosive system as calculated through Kissinger's method by 28.9%, which indicated an excellent catalytic effect for the thermal decomposition of underwater explosive. The results reveal that LiF can improve the combustion efficiency of B powder, thereby increasing the total energy of explosives. The mechanical sensitivity increased slightly after adding LiF-B to the underwater explosive. Compared to the underwater explosive with added B, the mechanical sensitivity of the explosive with added LiF-B was significantly lower.     

溅板式层板喷注单元燃烧特性数值分析

为了获得喷注单元结构参数对喷注器燃烧特性的影响规律,利用数值分析方法对单喷嘴溅板式层板喷注单元气-气燃烧特性进行研究,考察燃烧室特征长度及出口层喷嘴宽度对气氧/甲烷流动及燃烧特性的影响。在求解气-气燃烧流场方面,采用带化学反应的湍流N-S方程进行描述,其中化学动力学反应模型采用简化的单步9组分模型。研究结果表明:燃烧室特征长度的增大有利于特征速度效率的增加;该条件下采用溅板式层板喷注单元所对应的燃烧室特征长度约为600 mm。对比分析发现,出口层喷嘴宽度取0.15 mm时,水组分摩尔分数与热力计算值差别最大;当其值取1.05 mm时,燃烧室头部区域截面温度上升最快,取0.45 mm时上升最慢。总的来说,出口层喷嘴宽度取0.75 mm时,燃烧长度最短,燃烧效率最大。     

基于军民融合的军事信息资源效能转化

军事信息资源效能转化的强弱,事关军队信息化建设和军队战斗力生成,需要引起高度重视。本文阐述军民融合对军事信息效能转化工作的巨大推动力,并通过分析当前制约军民融合军事信息资源效能转化的内因和外因,提出完善军民融合军事信息资源效能转化工作的措施建议。     

防空C3I系统作战效能评估

为了更好地认识防空C3I在现代防空作战中的作用,了解我军防空C3I的作战效能,立足我军防空C3I装备现状,根据其技术性能及作战使用方法,依托已有研究成果,采取新的研究思想,运用WSEIAC法评估了防空C3I的作战效能.这种评估思想紧贴防空作战的实际,最大限度地衡量了防空C3I在作战中的性能发挥程度,对今后进行深入的研究发展,具有一定的参考价值.