Dual-steering mode based on direct yaw moment control for multi-wheel hub motor driven vehicles:Theoretical design and experimental assessment

One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process.This paper proposes a dual-steering mode based on direct yaw moment control for enhancing vehicle steering ability in complex environ-ments.The control system is designed as a hierarchical structure,with a yaw moment decision layer and a driving force distribution layer.In the higher-level layer,the objective optimization function is con-structed to obtain the slip steering ratio,which represents the degree of vehicle slip steering in the dual-steering mode.A yaw moment controller using active disturbance rejection control theory is designed for continuous yaw rate control.When the actual yaw rate of the vehicle deviates from the reference yaw rate obtained by the vehicle reference model and the slip steering ratio,the yaw moment controller is actuated to determine the yaw moment demand for vehicle steering.In the lower-level layer,there is a torque distribution controller based on distribution rules,which meets the requirement of yaw moment demand without affecting the total longitudinal driving force of the vehicle.For verifying the validity and feasibility of the dual-steering mode,simulations were conducted on the hardware-in-loop real-time simulation platform.Additionally,corresponding real vehicle tests were carried out on an eight-wheel prototype vehicle.Test results were generally consistent with the simulation results,thereby demon-strating that the proposed dual-steering mode reduces steering radius and enhances the steering per-formance of the vehicle.     

Adaptive sliding mode control of modular self-reconfigurable spacecraft with time-delay estimation

The reconstruction control of modular self-reconfigurable spacecraft (MSRS) is addressed using an adaptive sliding mode control (ASMC) scheme based on time-delay estimation (TDE) technology. In contrast to the ground, the base of the MSRS is floating when assembled in orbit, resulting in a strong dynamic coupling effect. A TED-based ASMC technique with exponential reaching law is designed to achieve high-precision coordinated control between the spacecraft base and the robotic arm. TDE technology is used by the controller to compensate for coupling terms and uncertainties, while ASMC can augment and improve TDE’s robustness. To suppress TDE errors and eliminate chattering, a new adaptive law is created to modify gain parameters online, ensuring quick dynamic response and high tracking accuracy. The Lyapunov approach shows that the tracking errors are uniformly ultimately bounded (UUB). Finally, the on-orbit assembly process of MSRS is simulated to validate the efficacy of the proposed control scheme. The simulation results show that the proposed control method can accurately complete the target module’s on-orbit assembly, with minimal perturbations to the spacecraft’s attitude. Meanwhile, it has a high level of robustness and can effectively eliminate chattering.     

火灾情况下地铁通风系统运行模式分析

分析了地铁在火灾情况下区间隧道和站台各种通风系统运行模式,以及通风系统有效运行所需达到的物理参数。对通风模式进行了分析,确定了火灾情况下最佳的通风方式。分析现行规范规定的数据,用临界风速公式进行计算得出区间隧道风速不满足通风要求。     

韩礼德的语域理论与大学英语教学

韩礼德的语域理论是系统功能语法的重要理论之一,它强调语言的交际功能和社会意义。文章探讨了如何将语域知识运用于大学英语教学实践,这种尝试不仅能使学生的阅读理解能力得到提高,而且有利于听、说、写、译等综合能力的提高,从而找到一种较好的教学方法,加速学生从语言知识向语言应用能力转化的过程。     

坦克炮控系统的反演滑模鲁棒摩擦补偿控制

坦克炮控系统存在低速摩擦,摩擦环节不但造成系统的稳态误差,而且导致极限环振荡、低速爬行等现象。为此提出基于反演理论的滑模鲁棒控制方法,通过Lyapunov稳定理论获得控制量。仿真结果表明该设计方法优于经典设计,为炮控系统实际设计提供了一种可行的方法。     

高超声速飞行器倾侧转弯耦合控制策略

针对高超声速飞行器倾侧转弯过程中俯仰、偏航和滚动通道间的强烈耦合,提出一种耦合控制策略。针对高超声速飞行器快时变、非线性和强不确定性的控制问题,基于解析形式的非线性最优预测控制方法,采用分层设计思想设计了飞行器姿态控制系统,可较好满足高超声速飞行器的快速性要求;在分析了倾侧转弯飞行控制过程的主要影响因素及其影响规律的基础上,提出一种"降低攻角—快速滚转—拉起攻角"的耦合控制策略。对该控制策略对于高超声速飞行器的适用性进行了仿真分析,结果表明:所提耦合控制策略有效降低了偏航通道的控制需求,降低了倾侧转弯控制过程的失控风险,提高了控制系统的可靠性。     

基于级间设计的人机联合探月方案

基于登月飞行器的级间组合设计方法对载人登月飞行器的构造进行设计,在级间方案的论证中分析了不同组装模式对运载火箭能力的需求,建立了航天员和机器人联合探测的载人登月方案。级间组合方法可为应转移飞行器和登月飞行器设计提供另一种思路,本文根据飞行器级间的不同组合方式对登月飞行器的质量规模进行了初步估算,并对比了不同飞行方案对运载火箭能力的需求,研究可为我国首次载人登月任务方案提供参考。     

不同时间信息条件下多目轨迹交会测量点目标运动的方法

针对多相机对点目标的运动轨迹测量,提出不同时间信息条件下的多目轨迹交会法。对点目标运动轨迹进行时间多项式参数化描述,再将多个相机观察目标的系列视线与目标的参数化运动轨迹进行交会,通过最小化物方残差,确定出目标的运动轨迹。相对于传统的多目交会测量模式,本方法不仅能够有效地提高测量精度,而且能够在多相机之间观测不同步,或者时间未对准,甚至无时间信息的情况下仍得到目标的运动轨迹参数。相对于单相机测量模式时要求相机必须运动,多目情况下不要求相机自身运动。仿真实验和真实实验验证了该方法的有效性和高精度。     

多波束干扰系统雷达干扰资源优化分配方法

合理的干扰资源分配方法是干扰系统发挥效能的关键,传统的雷达干扰资源分配方法基于一对一或多对一原则,且分配时不考虑干扰样式。基于多波束干扰系统,考虑干扰样式的限制建立了干扰约束过滤模型,采用ISODATA算法实现了对目标雷达分群,将干扰样式纳入干扰资源进行了干扰参数设置。该分配方法,使得干扰决策更加合理,提升了系统的干扰效率和自适应能力。     

机载PD雷达宽带线性调频信号运动补偿

采用宽带线性调频信号能够显著地提高雷达的距离分辨率和抗干扰能力,然而雷达与目标间的相对运动损耗了部分目标回波相参积累能量,影响目标频率向和距离向分辨力。针对以上问题,提出了一种基于改进匹配滤波函数的运动补偿方法,补偿信号回波中的相位误差,实现宽带线性调频信号目标运动运动补偿。实验与仿真结果证明了该算法的有效性。